• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권1호
• /
• pp.14-24
• /
• 2018

In soil washing, there are many variables including types of reagent and contaminant, washing time, soil-liquid ratio, washing cycles, washing agent concentrations, and etc. To identify the most influencing factors on soil washing process, regression analysis was performed for eight single variables and five combined variables. A quantitative model that employs W/H (molar ratio of washing agent to heavy metal) as a major variable was established based on the regression. The validity of the model was demonstrated by conducting lab experiments with Cu, Pb, Zn, Ni and As-contaminated soils, and various washing reagents including acetic acid, citric acid, malic acid, oxalic acid, ethylenediamine tetraacetic acid (EDTA) and nitriloacetic acid (NTA). The washing efficiencies were compared with the EDTA washing data reported in the literature. The correlation between W/H and removal efficiency was analyzed after dividing data into two groups according to the heavy metal mobility.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.437-441
• /
• 2000

A study on the removal of Pb ion from Pb-contaminated soil was carried out using ex-site extraction process. Tartaric acid (TA) and iminodiacetic acid sodium salt(IDA) as a washing agent were evaluated as a function of concentration reaction time mixing ratio of washing agent and recycling of washing agent. TA showed a better extraction performance than IDA. The optimum washing condition of TA and IDA were in the ratio of 1:15 and 1:20 between soil and acid solution during 1 hr reaction. The total concentrations of Pb ion by TA and IDA at three repeated extraction were 368.8 ppm and 267.5 ppm respectively. The recovery of Pb ion from washing solution was achieved by adding calcium hydroxide and sodium sulfide form the precipitation of lead hydroxide and lead sulfide and optimum amounts of sodium sulfide and calcium hydroxide were 7 g/$\ell$ for the TA washing solution and 4 g/$\ell$, 5g/$\ell$ for the IDA washing solution respectively. The efficiency of recycle for TA and IDA washing solution were 78.8% , 95.1%, and 89.2%, 96.6% at third extractions under $Na_2S$ and $Ca(OH)_2$, respectively.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권2호
• /
• pp.33-40
• /
• 2017

In typical remediation practices, separate washing systems have to be applied to clean up the soils contaminated with both oil and heavy metals. In this study, we evaluated the efficiency of successive two-stage soil washing in removal of mixed-contaminants from soil matrix. Two-stage soil washing experiments were conducted using different combinations of chemical agent: 1) persulfate oxidation, followed by organic acid washing, and 2) Fenton oxidation, followed by inorganic acid washing. Persulfate oxidation-organic acid washing efficiently removed both organic and inorganic contaminants to meet the regulatory soil quality standard. The average removal rates of total petroleum hydrocarbons (TPH), Cu, Pb, and Zn were 88.9%, 82.2%, 77.5%, and 66.3% respectively, (S/L 1:10, reaction time 1 h, persulfate 0.5 M, persulfate:activator 3:1, citric acid 2 M). Fenton oxidation-inorganic acid washing also gave satisfactory performances to give 89%, 80.9%, 87.1%, and 67.7% removal of TPH, Cu, Pb, and Zn, respectively (S/L 1:10, reaction time 1 hr, hydrogen peroxide 0.3 M, hydrogen peroxide:activator 5:1, inorganic acid 1 M).

• 한국의류학회지
• /
• 제21권2호
• /
• pp.471-481
• /
• 1997

Denims were treated with neutral cellulase, acid cellulase, stone, and stone-neutral cellulase respectively at different cellulase concentrations varying treatment times in rotary washer. The effect of washing on denim was estimated by the changes in weight, color, back staining, tear strength, flex stiffness, and surface characteristics. Also the comparison of neutral cellulase, acid cellulase, stone, and stone-neutral cellulase washings was studied. Washing removes surface fibers and provides weight loss, color difference, back staining, and a decrease in tear strength and in flex stiffness. Stone-neutral cellulase washing and acid cellulase washing have a larger washing effect than neutral cellulase washing and stone washing.

• 자원리싸이클링
• /
• 제20권1호
• /
• pp.61-68
• /
• 2011

산세척을 통해 금속급 실리콘을 정련하기 위해 황산, 질산, 염산과 불산의 혼산 용액을 사용하여 $50^{\circ}C$에서 불순물의 제거 거동을 조사하였다. 금속급 실리콘에 함유된 불순물중 붕소는 산세척으로 제거되지 않았고, 농축효과로 인해 처리 후 농도가 종가하였다. 본 실험범위에서 인은 약 60% 정도 제거되었다. 황산과 질산용액으로 처리시 주요 불순 금속의 제거율은 50% 미만으로 정련 효과가 크지 않았다. 염산과 불산의 혼산으로 산세척하면 주요 불순 금속이 90% 정도 제거되었다. 각 산세척조건에서 얻은 실리콘의 순도와 주요 불순 금속들의 제거율에 대한 자료를 제시하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권1호
• /
• pp.74-83
• /
• 2020

In this study, the effect of hydrochloric acid (HCl) concentrations on removal efficiency and chemical forms of heavy metals in dredged sediment during acid washing was investigated. The removal efficiencies of Zn, Cu, Pb, Ni and Cd by acid washing were 18.4-92.4%, 7.2-83.7%, 9.4-75%, 8.1-53.4% and 34.4-70.8%, respectively. Overall, the removal efficiencies of heavy metals were remarkably enhanced with the increase of the acid strength. However, the removal efficiencies for 0.5 and 1.0 M HCl were comparable, and both cases met the Korean soil contamination standard. Based on the sequential extraction results, concentration of the exchangeable fraction (F1), the most labile fraction, increased whereas concentrations of the other fractions decreased with increasing acid strength. Particularly, the carbonate (F2) and Fe/Mn oxides (F3) fractions drastically decreased by using 0.5 M or 1.0 M HCl. The current study results verified that acid washing could effectively reduce heavy metal concentrations and its potential mobility in dredged sediments. However, the study also found that acid washing may cause significant increase in bioavailable fraction of heavy metals, suggesting the need to evaluate the changes in chemical forms of heavy metals by acid washing when determining the acid strength to be applied.

• 한국환경과학회지
• /
• 제27권1호
• /
• pp.1-10
• /
• 2018

A continuous process of persulfate oxidation and citric acid washing was investigated for ex-situ remediation of complex contaminated soil containing total recoverable petroleum hydrocarbons (TRPHs) and heavy metals (Cu, Pb, and Zn). The batch experiment results showed that TRPHs could be degraded by $Fe^{2+}$ activated persulfate oxidation and that heavy metals could be removed by washing with citric acid. For efficient remediation of the complex contaminated soil, two-stage and three-stage processes were evaluated. Removal efficiency of the two-stage process (persulfate oxidation - citric acid washing) was 83% for TRPHs and 49%, 53%, 24% for Cu, Zn, and Pb, respectively. To improve the removal efficiency, a three-stage process was also tested; case A) water washing - persulfate oxidation - citirc acid washing and case B) persulfate oxidation - citric acid washing (1) - citric acid washing (2). In case A, 63% of TRPHs, 73% of Cu, 60% of Zn, and 55% of Pb were removed, while the removal efficiencies of TRPHs, Cu, Pb, and Zn were 24%, 68%, 62%, and 59% in case B, respectively. The results indicated that case A was better than case B. The three-stage process was more effective than the two-stage process for the remediation of complex-contaminated soil in therms of overall removal efficiency.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.20-24
• /
• 2022

고분자전해질연료전지 (PEMFC) 장기사용과정에서스택요소의부식및공급가스의오염에의해막전극합체 (MEA)의 화학적 열화가 발생한다. 본 연구에서는 화학적으로 열화된 MEA를 산 세척해서 성능을 회복시킬 수 있는지 연구하였다. 철 이온을 오염시키고 황산 수용액으로 세척하여 PEMFC 셀에서 성능을 측정해 비교했다. 0.5 ppm의 철 이온 오염에 의해 약 25%의 성능 감소가 있었고 0.15 M 황산 세척에 의해 97.1% 성능회복이 가능했다. 고분자 막의 철 이온 오염에 의해 막 저항이 증가했고, 저농도 황산 수용액 세척에 의해 전극 촉매의 손실을 최소화하면서 막에서 철 이온을 세척함으로써 이온전도도가 회복되었다. PEMFC MEA의 화학적 오염에 의한 내구성 감소를 산 세척에 의해 해결할 수 있는 가능성을 확인하였다.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.51-58
• /
• 2008

This paper presents the effect of acid treatment on the removal of metals and the brightness of pulp. The bleached kraft pulps, metal-absorbed pulps and recycled pulps((ONP, OCC, MOW, and SC) were treated with the acidic solutions. Among metals in the bleached kraft pulps, Cu, Ca and Mg were removed easily by the acid washing, whereas Fe, Al and Si were not removed. The acid washing also removed distinctly metals from the metal-absorbed pulps. The metals absorbed in pulps reduced the brightness (%, ISO). Especially, Fe was the most detrimental metal. However, the brightness which was decreased by metals was restored to the status quo by the acid washing. The level of metals in recycled pulps was gradually reduced after the first flotation and acid treatment. Hence, the degree of metal removal by the acid washing was mainly dependent upon the kinds of waste pulps and metal ions.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.337-339
• /
• 2003

The technology removing radionuclides from soil using soil washing was studied. The main radionuclides contaminated in the soil are Cs$^{137}$ and Co$^{60}$ . It is suitable that scrubbing time is 4 hours and a mixing ratio of soil weight and washing solution volume is 1:10. more than two times continuous scrubbing method with 0.5 M oxalic acid was needed to remove Cs$^{137}$ and Co$^{60}$ from soil more than 70%. Radionuclides removal efficiencies of recycling washing solutions recycled with strong acid resins until 5 times are similar to that of 0.5 M oxalic acid.