• The Korean Journal of Mycology
• /
• v.22 no.1
• /
• pp.8-30
• /
• 1994

The synthesis of phospholipids and the composition of fatty acids were analyzed in the fungal cells of Aspergillus phoenicis, Rhizopus acidus and Candida albicans treated with carbon sources (glucose, sucrose, raffinose) during the culture. Growth ratios were predominantly in Aspergillus and Candida treated with sucrose and those in Rhizopus treated with glucose. The synthesis of total lipids were accelerated in Aspergillus and Rhizopus with glucose and the contents of total lipid was increased in Candida with raffinose. The glucose treatment increased Phosphatidylinositol(PI) content by 73.7% for Aspergillus and Phosphatidylcholine(PC) content by 292% for Rhizopus. In sucrose treatment the synthesis of PI was accelerated 112% for Aspergillus and that of PC was increased 77.7% for Rhizopus and 71.8% for Candida. In raffinose treatment, the content of PC was increased 79.5% for Aspergillus, the biosynthesis of Phosphatidylethanolamine(PE) was inhanced 50.9% for Rhizopus and 49.1% for Candida. In Aspergillus and Candida, oleic acid and linoleic acid were major fatty acids for biosynthesis of PC and PE when the three carbon sources were treated. The major fatty acids for biosynthesis of phospholipid was palmitic acid and linoleic acid in Aspergillus, palmitic acid in Rhizopus and oleic acid in Candida. Palmitic acid was one of major fatty acids utilized for the biosynthesis of phospholipid(PC, PE, PI) in the fungal cells treated with carbohydrates.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.26-31
• /
• 1984

In general, acid dyes been used for silk dyeing, but acid dyed silk shows weakness in color fastess, To improve this defect, the silk dyed with Acid Mordant Blue 13 was treated with chromes salts solution. Some mechanical properties and dyeing behaviors of the chrome mordant with dyed silk fabric were tested in this work. The tensile strength of silk fabric treated with chrome salts solution was decreased as the duration of treatment was increased. The mean rate constant (K) of photo-degradation was 1.019, and 1.047 after treated with Cr (III) and Cr (Ⅵ), respectively, whereas it was 1.304 in untreatment. The washing fastness of silk fabric also was improved by treatment with mordant and it was 3rd-4th grade and 4th grade when silk was treated with Cr (III) and Cr (Ⅵ), respectively, while untreatment gave 1st grade. The colour of dyed silk fabric was 2.5RP.3/10, but it was 5PB.4/3 and 5PB. 4/4 when the silk fabric was treated with Cr (III) for two hours and with Cr (Ⅵ) for one hour at 90$^{\circ}C$, respectively.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Journal of Food Hygiene and Safety
• /
• v.11 no.1
• /
• pp.51-55
• /
• 1996

As a preliminary experiment to investigate the effect of ozone sterelization on the ginseng powder, the changes of fatty acid composition and organic acid content and sensory properties in ginseng powder treated with ozone was investigated. Ginseng powder was treated with 0.5 ppm ozone for 24 hours and 48 hours, respectively. With increase in ozone treatment time, the content of crude lipid and increase. Contents of unsaturated fatty acid-linolenic acid, linoleic acid, and oleic acid, etc.-decreased with ozone treatment time, whereas saturated fatty acid or same number-stearic acid-increased odor, bitter taste, roasted taste and sweet taste were thiner with ozone treatment times, but pungent taste was thicker with those treatment. These changes of ordors and tastes of ginseng powder with ozone treatment were predicted by oxydation of lipids, flavor components and saponins.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.3
• /
• pp.106-111
• /
• 2006

The objective of this paper is to compare the surface features of two kinds of nano-porous activated carbon fiber (NPACF) treated with potassium and the variation of their properties by phosphoric acid pre-treatment. X-ray diffraction (XRD) patterns indicate that NPACF containing potassium species show better performance for potassium and potassium salts by pre-treatment with phosphoric acid. In order to present the causes of the differences in surface properties and specific surface area after the samples were treated with phosphoric acid, pore structure and surface morphology are investigated by adsorption analysis and SEM. For the chemical composition microanalysis for potassium loading of the NPACF pre-treated with phosphoric acid, samples were analyzed by EDX. Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1379-1384
• /
• 2009

The purpose of this study is to investigate the effect of water extract from Artemisiae Argi Folium Fermented with Lactobacillus pentosus (AFL) on hydrogen peroxide production within human hepatocyte HepG2 cells treated with gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde. AFL (0~400 ug/mL) was treated with gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde. And the intracellular productions of hydrogen peroxide were measured by dihydrorhodamine 123 (DHR) assay. AFL showed the restoration of the intracellular productions of hydrogen peroxide which were reduced by gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde in HepG2 Cells. AFL could be supposed to have the hepatoprotective effect related with hepatocytologic signaling activity against gallic acid, EtOH, nicotine, acetaminophen, and acetaldehyde.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.315-319
• /
• 1992

Korean green tea leaves which were harvested three times(May, June, August) were treated with anaerobic conditions and were measured changes of ${\gamma}-aminobutyric$ acid(GABA) and other constituents. In anaerobically treated green tea leaves, the content of ${\gamma}-aminobutyric$ acid(GABA) and alanine increased while glutamic acid decreased. Whereas theanine, arginine, caffeine and tannin showed little change and the content of vitamine C slightly decreased with the passing of the anaerobic treatment time. Formation of GABA, a hypotensive constituents, was proportioned to the content of glutamic acid and the optimum time of the anaerobic treatment was about 12 hours. In the anaerobic treatment of green tea leaves, effect of nitrogen gas and vacuum condition was no difference between two.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.43-50
• /
• 2006

The main colorant of Chelidonium majus extracts is a berberine which shows relatively good dyeability onto silk fabrics in the appropriate dyeing conditions without mordant, But cotton fabrics are difficult to dye with berberine because of the low substantivity the cationic to cellulosic fibers. we treated cotton fabrics using three types of polycarboxylic acid, DL-malic acid, citric acid, 1,2,3,4-butanetetracarboxylic acid(BTCA) to increase dyeability of Chelidonium majus extracts onto cotton fabrics. As a result the cotton fabrics treated with polycarboxylic acid could be dyed with Chelidonium majus extracts and also showed yellow vividly. The dye uptake were increased with increasing the number of carboxy groups. And so dye uptake resulted the largest in the BTCA solutions which have four carboxylic groups in the molecular unit. The optimal dyeing temperature a of Chelidonium majus extracts onto polycarboxylic acid treated cotton fabrics were $60^{\circ}C$. The dye equilibrium was reached 20 minutes after dyeing. Neutral pH of dye solutions showed in higher K/S value than acidic or alkaline conditions. But the colorfastness to washing and light according to polycarboxylic acid treat was not enhance.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.45-63
• /
• 1994

128 freshly extracted human molars were used to study the interaction between dentinal smear layer removal with various agents, and the shear bond strength of a light cured glass ionomer cement to dentin. It was proposed that the removal of smear layers using acidic cleaners followed by incorporation of Fe mordant with dentin could enhanced the infiltration of monomer component in light curing glass ionomer cement and resulted in a high bond strength. For the first treatment process for removal of smear layers on the surfaces of dentin, 50 % citric acid, 10% maleic acid and 10 % phosphoric acid were used, and for the second treatment process, 15% ferric chloride, 6.8% ferric oxalate or 30% potassium oxalate were used. Distilled water was used as a control. After double sequential treatment on dentin, a light curing glass ionomer cement was bonded to dentin. After being immersed in water at 31'C for 24 hours, shear bond strengths were measured Instron testing machine(Model No.4202, USA). Surface changes were also observed using SEM (Hitachi, S-2300, Japan) after treatment process with each agents. The following conclusions were drawn : 1. Dentin surface cleaned with maleic acid and treated with ferric oxalate showed the highest bond strength with light curing glass ionomer cement. 2. Bond strengths of glass ionomer cement to dentin treated with maleic acid or citric acid were the highest, and that treated with phosphoric acid showed the lowest. 3. The effect of ferric oxalate on shear bond strength to dentin was always higher than that of ferric chloride. 4. The smear layers were clearly removed and the orifices of dentinal tubules were opened widely by the citric acid, maleic acid and phosphoric acid. 5. The orifices of dentinal tubules opened after using the first solution were closed with the treatment of ferric chloride. 6. The precipitate like crystals were formed on dentin surfaces and tubules, but a significant decrease in bond strength of glass ionomer cement to dentin surface treated with potassium oxalate.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.