• Macromolecular Research
• /
• v.12 no.3
• /
• pp.263-268
• /
• 2004

We have synthesized a water-soluble polyimide precursor, poly(amic acid) amine salt (PAD), from pyromellitic dianhydride (PMDA), 4,4'-oxydianiline, and N,N -dimethylethanolamine (DMEA) and have investigated in detail its properties with respect to the degree of salt formation (D$\_$sf/). The maximum value of D$\_$sf/ we obtained upon precipitation of the precursor solution into acetone was 79%. We synthesized a PAD having a D$\_$sf/ of 100% (PAD100) by the solid state drying of an organic solution. The precursors showed different solubility depending on the D$\_$sf/ to make up to 4 wt% solutions in water containing a small amount of DMEA. PAD100 is completely soluble in pure water. We investigated the imidization behavior of PAD in aqueous solution using various spectroscopic methods, which revealed that PAD 100 has faster imidization kinetics relative to that of the poly(amic acid)-type precursors. The resulting polyimide films prepared from an aqueous precursor solution possess almost similar physical and thermal properties as those prepared from N-methyl-2-pyrrolidone(NMP) solution. Therefore, we have demonstrated that PAD can be used as a water-based precursor of polyimide; this procedure avoids the use of toxic organic solvents, such as NMP.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.901-905
• /
• 2003

The lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxypoly(ethylene glycol) (MPEG) and amino acid esters as side groups was studied as a function of saccharide concentration in aqueous solutions of mono-, di-, and polysaccharides. Most of the saccharides decreased the LCST of the polymers, and the LCST decrease was more prominently observed by saccharides containing a galactose ring, such as D-galactose, D-galactosamine and D-lactose, and also the polysacccharide, 1-6-linked D-dextran effectively decreased the LCST of the polymers. Such an effect was discussed in terms of intramolecular hydrogen bonding of saccharides in polymer aqueous solution. The saccharide effect was found to be almost independent on the kinds of the amino acid esters and MPEG length of the polymers. Such a result implies that the polymer-saccharide interaction in aqueous solution is clearly influenced by the structure of sacchardes rather than by that of the polymers. The acid saccharides such as D-glucuronic and D-lactobionic acid increased the LCST, which seems to be due to their pH effect.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.111-120
• /
• 2010

In this study, the effects of multi-complex agents addition on characteristics of electroless Ni plating solution are investigated. The species and the concentration of complexing agents are major factors to control the deposition rate, P concentration, and surface morphology of plating films. Adipic acid increases the deposition rate in regardless of single- or mutli-complex agent addition. However, lactic acid effectively increases the deposition rate in case of multi-addition as the complex agents with adipic or sodium succinate acid. In addition, sodium citric acid and malic acid show good stabilizing effects of plating solution and lowering the deposition rate, because they have high complexibility. Therefore, it is suggested that the development of Ni-P plating solution suitable for diverse usages can be carried out systematically using the database from this study.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.613-625
• /
• 1999

The purpose of this study was to compare the bracket shear bond strengths of the crystal growth solutions with those of the $37\%$ phosphric acid etch technique. The 4 crystal growth solutions were made experimentally in the lab, that is, (1) $30\%$ polyacrylic acid solution containing 0.3 M sulfuric acid (ES 1), (2) $30\%$ polyacrylic acid solution containing 0.6M sulfuric acid (ES 2), (3) $30\%$ polyacrylic acid solution containing 0.3 M sulfuric acid and 0.6 M lithium sulfate(ES 3), and (4) $30\%$ polyacrlic acid solution containing 0.3 M sulfuric acid and $5\%$ phosphoric acid(ES4). The $37\%$ phosphoric acid solution used as a control. Bovine lower incisor tooth enamel was treated by the above solutions for 60 sec, washed out for 20 sec with slow water stream, and bonded lower anterior edgewise bracket with the light curing orthodontic composite resin adhesives. The teeth bonded brackets were stored in the distilled water at room temperature for 24 h, and followed to test the bracket shear bond strength. The acid etch technque showed 177.6 kg/$cm^2$ of mean shear bond strength which was the highest among the enamel treatment solutions. ES 1 shown 58.4 kg/$cm^2$ of mean shear bond strength and that of ES 4 showed 66.5 kg/$cm^2$. There was no significant difference between the two(p>0.05). ES2 showed 110.6kg/$cm^2$ of mean shear bond strength which was $62.3\%$ of that of acid etch technique. ES 3 showed 131.1 kg/$cm^2$ of mean shear bond strength which was the highest among experimental crystal growth solutions and which was $74\%$ of that of acid etch technique. The shear bond strengths of the crystal growth solutions were significantly lower that that of acid etch technique(p<0.05). The results sugest that although bracket shear bond strength of $30\%$ polyacrylic acid solution containing 0.3M sulfuric acid and 0.6 M lithium sulfate were showed the highest, it is low for the clinical application of this solution.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.140-143
• /
• 2001

A study has been made on the recovery of nitric acid and valuable metals such as Cu, Sn, Pb from the spent nitric etching solutions. The nitric acid was extracted effectively by TBP but the heavy metals such as Fe, Cu, Sn, Pb were not extracted by TBP from the spent nitric etching solutions. From the experimental results, 95% of nitric acid in spent etching solution was extracted at O:A ratio of 3:1 with five stage by 60% TBP and 98% of nitric acid was stripped from the loaded organic phase at O:A ratio of 1:1 with four stages by distilled water. After extracting nitric acid, Cu was recovered as a metal by electrowinning effectively and Sn was successfully removed by precipitation method by adjusting the pH of raffinate solution. Finally, Pb was recovered by cementation with iron scrap at $65^{\circ}C$. Parameters controlling the cementation process, such as temperature, pH and the effect of the additives were investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.4
• /
• pp.512-515
• /
• 2005

An in vitro study was conducted to determine the effect of C18-polyunsaturated fatty acid on direct incorporation into the rumen bacteria, bio-hydrogenation and production of CLA in vitro. Sixty milligrams of linoleic acid ($C_{18:2}$) or linolenic acid ($C_{18:3}$) were absorbed into the 0.5 g cellulose powder was added to the 150 ml culture solution consisting of 120 ml McDougall's buffer and 30 ml strained rumen fluid. Four uCi of 1-$^{14}C_{18:2}$ or 1-$^{14}C_{18:3}$ (1 uCi/15 mg each fatty acid) were also added to the corresponding fatty acids to estimate the direct incorporation into the bacterial lipids. The culture solution was then incubated anaerobically in a culture jar with stirrer at 39$^{\circ}C$ for 12 h. Ammonia concentration and pH of the culture solution were slightly influenced by the fatty acids. Amount of fatty acid incorporated into the bacteria was 1.20 mg and 0.43 mg/30 ml rumen fluid for $C_{18:2}$ and $C_{18:3}$, respectively during 12 h incubation. Slightly increased CLA (sum of cis-9, trans-11 and cis-10, trans-12 $C_{18:2}$) was obtained from the $C_{18:3}$ addition compared to that from $C_{18:2}$ after 12 h incubation in vitro.

• Journal of Life Science
• /
• v.11 no.3
• /
• pp.197-202
• /
• 2001

This study was conducted to investigate the effect of simulated acid solution(SAS) on acid buffering capacity, chlorophyll content and butrient leacking in 4 herb species(Petunia hybrida Vilm, Gomphrena globosa L. Celosia cristat L. Salvia officinallis L) . The acid buffering capacity in the leves was increased in the treatment of pH 3.0 in Celosia L., whereas it was increased at pH 4.0 in Petunia Petunia hybrida Vilm. and Gomprean globosa L.. But, the acid buffering capacity of the leaves did not work at ph 2.0 treatment in 4 herb species. With decreasing pH level, the chlorophyll content of Petunia hybrida Vilm. and Gomphrena globosa L. Was markedly decreased than that of Gelosia cristata L. and Savia officinalis L. As the pH levels decreased from 5.6 to 2.0 the nutrient leaching from leaves was significantly increased in 4 herb species. In pH 4.0 and 5.6, the concentrations of nutrient leaching from leaves were higher in Perunia hybrida Vilm. and Gomphrean globosa L. than Gelosia cristata L. and Salvia officinalis L., Based on the results, there was a great differences in response to SAS among the 4 herb species. Im general, Gelosia cristata L. and Salvia officinalis L. represented a higher tolerance to SAS Petunia hybrida Vilm, and Gomphrena globosa L..

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.878-882
• /
• 2008

The efficacy of citric acid-aqueous chlorine dioxide ($ClO_2$) treatment of radish seeds artificially contaminated with Escherichia coli was studied. Radish seeds were inoculated with E. coli. Following inoculation, samples were stored at $4^{\circ}C$ and soaked in citric acid or aqueous $ClO_2$ for 10 min. The treatment of radish seeds using 200 ppm aqueous $ClO_2$ solution caused a 1.5 log CFU/g reduction in the population of E. coli. Compared to the aqueous $ClO_2$ treatment, soaking radish seeds in 2.0% citric acid solution for 10 min was more effective in reducing E. coli populations on radish seeds. The efficacy of spray application of chlorine (100 ppm) or 0.5% citric acid to eliminate E. coli during the germination and growth of radish was investigated. Radish seed inoculated with E. coli was treated for the duration of the growth period. Although it resulted in a decrease in the E. coli population, the spray application of 100 ppm chlorine during the growth period was not significantly effective. In contrast, the combined treatment of seeds using 200 ppm aqueous $ClO_2$ and treatment of sprouts with 0.5% citric acid solution during sprout growth was hardly effective in eliminating E. coli.

• Korean Journal of Materials Research
• /
• v.32 no.6
• /
• pp.301-306
• /
• 2022

This study explored the possibility of forming a coating layer containing alginic acid on the surface of a magnesium alloy to be used as a biomaterial. We formed a coating layer on the surface of a magnesium alloy using a plasma electrolytic oxidation process in an electrolytic solution with different amounts of alginic acid (0 g/L ~ 8 g/L). The surface morphology of all samples was observed, and craters and nodules typical of the PEO process were formed. The cross-sectional shape of the samples confirmed that the thickness of the coating layer became thicker as the alginic acid concentration increased. It was confirmed that the thickness and hardness of the sample significantly increase with increasing alginic acid concentration. The porosity of the surface and cross section tended to decrease as the alginic acid concentration increased. The XRD patterns of all samples revealed the formation of MgO, Mg₂SiO₄, and MgF₂ complex phases. Polarization tests were conducted in a Stimulate Body Fluid solution similar to the body's plasma. We found that a high amount of alginic acid concentration in the electrolyte improved the degree of corrosion resistance of the coating layer.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.141-161
• /
• 1998

The depth and patterns of demineralization according to the difference in concentration and application time of phosphoric acid were observed through the transmission electron microscope, and shear bond strengths to the acid -conditioned dentin were then measured and compared with the TEM results. To investigate the influence of polymer addition into the phosphoric acid and the effect of difference in concentration and application time of the acid, the specimens were randomly divided into 9 groups. Among the specimens, the exposed dentin surfaces were acid-conditioned with 10% polymer-thickened phosphoric acid(All Bond 2, Bisco, U.S.A.) and aqueous 10%, 20%, 30%, 40% phosphoric acid for 20 seconds, The rest of the specimens were acid-conditioned with 10% phosphoric acid for 15s, 30s, 60s, 120s respectively. The specimens were immersed in 4% glutaraldehyde in 0.1M sodium cacodylate buffer and postfixed with 1 % osmium tetroxide without decalcification and then observed under a JEOL Transmission Electron Microscope(JEM 1200 EX II, Japan). After the specimens were acid-conditioned as the above, primer and adhesive resin were applied to blot-dried dentin and shear bond strengths were then measured and analysed. The results were as follows : 1. The intertubular demineralization depth of 4.0-$5.0{\mu}m$ in 10% polymer-thickened phosphoric acid gels was similar or slightly deeper than that of 4.0-$4.5{\mu}m$ in aqueous 10% phosphoric acid solution. 2. The intertubular demineralization depth of aqueous 20%, 30% and 40% phosphoric acid solution was 6.5-$7.0{\mu}m$, 6.5-$7.5{\mu}m$ and 9.0-$15.0{\mu}m$ respectively. It showed that the depth of dentin demineralization is partly related to the concentration of phosphoric acid solution. 3. The intertubular demineralization depth of aqueous 10% phosphoric acid solution in application time for 15s, 30s, 60s and 120s was 2.5-$3.0{\mu}m$, 4.0-$6.0{\mu}m$, 6.5-$7.0{\mu}m$ and 8.5-$14.0{\mu}m$ respectively. It showed that the depth of dentin demineralization is directly related to the application time of phosphoric acid solution. 4. The partially demineralized dentin layer between demineralized collagen layer and unaffected dentin was showed to a width of 0.5-$1.0{\mu}m$ in lower concentration groups treated with aqueous 10% phosphoric acid for 20s, 60s, 120s and 20% phosphoric acid for 20s. 5. The demineralization effect at the border of intertubular-peritubular junction was less evident than that in the peritubular and intertubular dentin. The collagen fibers in the intertubular dentin had a random orientation, whereas those that lined the tubules were circumferentially aligned. The cross-linkage of dentinal collagen in demineralized collagen layer was clearly seen. 6. A statistically significant difference of bond strengths according to the difference in phosphoric acid concentration did not exist among the groups treated with 10%, 20%, 30% and 40% acid solution (P>0.05). However, bond strengths to the treated dentin with 10% phosphoric acid solution for 30s were significantly higher than that for 120s (P<0.05).