본 연구는 산부식 법랑질의 타액오염 효과를 오염 시간별 전단결합강도를 통해 알아보고 주사 전자현미경으로 표면 변화를 관찰하고자 하였다. 타액오염 시간이 전단결합강도에 미치는 영향을 관찰하기 위하여 38% 인산용액으로 15초와 60초 산부식한 후 타액으로 0초, 1초, 20초, 60초동안 오염시켜 세척과 건조 후 주사 전자현미경으로 부식면을 검경하였으며, 교정용 레진을 이용하여 브라켓 접착 후 전단결합강도를 측정하고 통계 처리하여 다음과 같은 결과를 얻었다. 1. 타액에 오염시키지 않은 15초 산부식 군과 60초 산부식 군 사이의 전단결합강도는 통계적으로 유의한 차를 보이지 않았으나, 60초 산부식군에서 전단결합강도가 조금 낮았다. 2. 15초, 60초 산부식군에서 대조군, 1초, 20초, 60초의 타액오염 시간의 차이 에 따른 전단결합강도는 통계적으로 유의한 차를 보이지 않았으나, 타액오염시간의 증가에 따라 전단결합력이 낮아지는 경향을 보였다. 3. 주사 전자현미경 관찰시 대조군에서는 특징적인 부식양상을 보였으나 타액오염 군에서는 유기물이 침착되어 있었다.
이 연구는 법랑질의 표면처리가 광중합형 및 화학중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도에 미치는 영향을 구명하고, 글래스아이오노머 시멘트의 브라켓전단결합강도와 치과교정용 레진접착제의 그것과 비교하기 위하여 시행하였다. 발거된 사람소구치의 법랑질표면을 $10\%$ 폴리아크릴산용액, $38\%$ 인산용액과 퍼미스로 처리한 후, 광중합형 글래스아이오노머 시멘트의 일종, 화학중합형 글래스아이오노머 시멘트의 일종 및 화학중합형 치과교정용 레진접착제의 일종으로 법랑질표면에 금속브라켓을 접착하고, $37^{\circ}C$의 증류수속에 24시간 침지시킨후, 브라켓전단결합강도를 측정하고, 접착파정패턴을 관찰하였으며, 표면처리된 법랑질표면을 주사전자현미경으로 관철하여 다음과 같은 결과와 결론을 얻었다. 1. 표면처리방법에 관계없이 광중합형 글래스아이오노머 시멘트의 브라켓전단결합강도는 화학중합형 글래스아이오노머 시멘트의 그것보다 높았다. 2. $38\%$ 인산용액과 $10\%$ 폴리아크릴산용액은 퍼미 스보다 글래스아이오노머 시멘트의 브라켓전단결합강도를 높였다. 3. 주사전자현미경 관찰에서 $10\%$ 폴리아크릴산용액은 법랑질표면을 미약하게 부식시키고 청결하게 하였으며, $38\%$ 인산용액은 법랑질을 심하게 부식시켰고, 퍼미스를 이용한 세마는 법랑질표면에 불규칙한 흠집을 만들고 청결하지 못한 표면을 만들었다. 4. $10\%$ 폴리아크릴산용액으로 표면조건화된 법랑질에 대한 광중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도는 $38\%$ 인산용액으로 부식된 법랑질에 대한 치과교정용 레진접착제의 그것과 유의차가 없었다. 이상의 결과는 $10\%$폴리아크릴산용액으로 표면조건화시킨 광중합형 글래스아이오노머 시멘트에 의한 브라켓접착은 통상적으로 사용되어온 치과교정용 레진접착제에 의한 브라켓 접착을 대체할 수 있음을 시사한다.
The effects of various All-Etching Agents (10% phosphoric acid, 10% maleic acid and 10 % citric acid) and 32 % phosphoric acid and varied etching time were evaluated by observing the morphology of the etched enamel surfaces using Scanning electron microscopy and by measuring the shear bond strength of a composite resin to human enamel. A total of 156 extracted premolar and molar teeth free of irregularities were employed in this study. Specimens for the observation of enamel morphology were divided into 12 groups of 3 teeth each, based on the type of etchant used and application time. After exposure to the etching agent specimens were washed air-dried and then glued to aluminum stubs and coated with a layer of gold for examination in the scanning electron microscope. Specimens for the evaluation of bond strength were divided into 12 groups of 10 teeth each also based on the type of etchant used and application time. After exposure to the etching agent the specimens were washed, air-dried and a thin layer of bonding agent was applied using a brush. Z 100 composite resin was light cured to the surface and stored at $37^{\circ}C$, 100% humidity for 7 days. An Instron Universal Testing Machine was used to apply a shearing force at $90^{\circ}$ angle from the enamel surface. It is concluded from this study that commercial All-etching agents can be used with a 15-second etching without adversely affecting retention of dental resin materials. At the same time, the acid concentration is probably a suitable compromise regarding the acid's function as a dentin demineralizing all-etch conditioning agent. The following results were obtained. 1. Specimens etched with 10 % citric acid showed a random superficial etching pattern which could not be related to prism morphology. 2. Specimens etched with 10 % and 32 % phosphoric acid and 10 % maleic acid showed a type I pattern in which core material was preferentially removed leaving the prism peripheries relatively intact or a type II pattern in which prism peripheries were preferentially removed. This delineation became more distinguished as etching time was increased. 3. All-Etching Agents and 32 % phosphoric acid showed a statistically significant higher shear bond strength at 15 seconds etching time.(p<0.05) 4. 10 % maleic acid and 32 % phosphoric acid exhibited a statistically significant higher shear bond strength than 10 % phosphoric and citric acid at 15 seconds etching time.(p<0.05).
The purpose of this study was to observe the bonding strength between tooth surface (enamel and dentin) and restorative filling materials which are two composite resins (Clearfil and Concise) and Glass ionomer cement, after etching with 50% phoshoric acid and 37% citric acid. To measure the bonding strength in enamel, the labial surface of upper anterior tooth was cut flatly with using carborundum disk and polished with sand paper disk, and to measure in dentin, the dentin surface was prepared by grinding upper part of posterior tooth horizontally. After washing the tooth surface with water and drying with air blast, the prepared tooth surface was etched. In glass ionomer cement, 50% phosphoric acid and 37% citric acid were used, in Clearfil 40% phosphoric acid was used and in Concise, 50% phosphoric acid and 37% citric acid were used as etchant for 1 minute. After the copper band which is 5 mm in diameter and 5 mm in height was fixed on the prepared surface and each filling material was inserted into the copper band, the hooking loop was inserted into filled material in the copper band before setting to make it easily that the load is applied on the specimen. After all specimens were immersed in water at $37^{\circ}C$ for 1 week, this specimen was placed on the load cell of tensile test apparatus, and specimen was pulled at the cross-head speed of 0.8 mm per minute. The following results were obtained 1) In glass ionomer cement, the bond strength obtained by 37% citric acid was higher than one obtained by 50% phosphoric acid in enamel and dentin surfaces. The bond strength obtained in non-etched surface was much less than one by etchants in enamel and dentin surface. 2) In Clearfil, the bond strength obtained by 40% phosphoric acid was 4 times more than one obtained by non etch ant. 3) In Concise, the bond strength obtained by 50% phosphoric acid was almost same as one obtained by 37% citric acid, and the bond strength obtained by non etch ant was much less than one obtained by etchants.
산부식된 법랑질표면의 오염은 브라켓의 레진 접착력에 영향을 미친다고 보고되어 왔다. 이 연구의 목적은 인산액이 법랑질과 반응하여 수용성염 및 불수용성염을 형성하는 경우와 부식표면이 타액오염된 경우에, 이의 수세시간이 브라켓의 레진접착 전단결합강도에 미치는 영향을 관찰하기 위하여 시행되었다. 치과 교정치료를 목적으로 발거된 총 234개의 상하악 소구치를 대상으로 $37\%$ 인산액으로 60초간 부식한 군, $20\%$ 인산액으로 50초간 부식 한 군, $37\%$ 인산액으로 60초간 부식 하고 타액오염시킨 군으로 나누고, 인산부식군은 각각 0초, 5초, 10초, 20초간 수세하고, 타액오염 군은 0초, 20초,30초 수세하거나, 재부식후 5초, 10초, 20초간 수세한후 레진접착제로 브라켓을 접착하였다. 5각군의 법랑질표면을 주사전자현미경과으로 검경하고, 전단결합강도를 측정하여 비교검토한 결과 다음의 결과를 얻었다. 1) 산부식후 수세를 하지않으면 레진접착제의 전단결합강도가 현저히 감소 하였다. 2) $37\%$ 인산부식액으로 부식시키고 5초, 10초, 및 20초간 수세한후의 접착레진 전단결합강도 사이에는 차이가 없었다. 3) $20\%$ 인산액으로 부식시키고 5초, 10초, 및 20초간 수세한 후의 전단결합강도사이에는 차이가 없었으나, 5초간 수세후의 전단결합강도는 측정치의 변이가 매우컸다. 4) 부식후 타액으로 오염된 법랑질 표면은 5초, 20초간 및 30초간 수세후 및 재부식 한 후의 브라켓접착레진의 전단결합강도사이에 차이가 없었으나, 5초간 수세만한 군의 전단결합강도는 변이가 매우컸다. 이상의 결과에 의하면 수용성 염이 생성되는 농도의 인산액으로 부식하고 5초간 수세후 불수용성 염이 생성되는 농도의 인산액으로 10초간 수세후에, 그리고 타액오염된 부식표면을 재부식없이 20초간 수세후에 브라켓을 접착하면 임상적으로 유용한 부라켓 접착레진의 전단 결합강도를 얻을수 있을 것으로 추정된다.
The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.
법랑질의 표면처리에 따른 광중합형 글래스아이오노머 시멘트의 전단결합강도를 알아보고자 사람 소구치 80개를 선택하여 8개군으로 나누어 전단 결합 강도를 측정하고, 접착 파절의 양상을 평가하여 다음과 같은 결과를 얻었다. $1.37\%$ 인산용액으로 부식한 후 건조상태에서 글래스아이오노머 시멘트, 광중합형 레진, 화학중합형 레진으로 각각 부착한 실험군에서 글래스아이오노머 시멘트 실험군의 전단결합강도는 두 군과 유의한 차가 없었으나 화학중합형 레진군의 그것은 광중합형 레진군에 비해 유의성있게 낮았다 (p<0.05). $2.37\%$ 인산 실험군, $10\%$ 폴리 아크릴산 실험군, $1.23\%$ APF 실험군, 산처리하지 않은 실험군의 습한 상태에서 부착한 글래스아이오노머 시멘트의 전단결합강도에서 산처리하지않은 실험군의 그것이 유의성 있게 낮았으며, 그 외 군간에는 유의성 있는 차이가 없었다 (p<0.05). 3. 글래스아이오노머 실험군에서 습기의 존재가 전단결합강도에 유의성 있는 영향을 미치지 않았다 (p<0.05). 4. 산부식처리를 하지않은 군의 접착제 잔류지수가 가장 낮았으며 $37\%$인산용액으로 처리한 군의 접착제 잔류지수가 가장 높았다.
이 연구는 부식농도가 전단결합강도와 법랑질 표면의 부식깊이에 미치는 영향을 관찰하기 위하여 표면을 편평하게 연마한 소의 법랑질을 $0%,\;5%,\;10%,\;20%,\;30%,\;40%,\;50%,\;60%,\;70%,\;80%$ 및 $85\%$ 인산용액으로 60초간 부식시키고, 브라켓 접착의 전단결합강도와 법랑질 표면의 부식깊이와 조도를 측정하고, 주사전자현미경으로 부식면을 검경하였으며, 이상에서 얻은 자료를 통계처리하고 평가하여 다음과 같은 결론을 얻었다. 법랑질 표면의 부식깊이는 인산액의 농도가 $40\%$ 내지 $50\%$에 도달할 때까지 증가하다가 그 이후의 농도증가와 함께 점진적으로 감소하였다. 법랑질 표면의 부식깊이와 부식면의 조도 사이에 상관성이 없었으며, 부식면의 조도와 전단결합강도 사이에 중등도의 상관성($\gamma$=0.63)을 보였다. 인산액의 농도가 $5\%$에서 $40\%$에 도달할때까지 균질의 편평한 부식면을 나타내는 소견을 보였으나 $50\%$와 $60\%$에서 불균질의 과도한 그리고 편평하지 못한 부식면소견을 보였으며, $10\%$에서 $60\%$까지의 인산액에 의한 법랑질 부식 후 레진 접착제의 전단결합강도 사이에는 유의차가 얼었으며, $5\%$와 $70\%$의 인산액에 의한 것은 전자보다 작았으나 구강내에서 교정력에 견딜수 있는 전단결합강도를 나타낼 것으로 추정된다.
The purpose of this study was to measure the roughness on the acid -etching surface. The etching agents of three-kinds composite resins were used to etch the tooth surface. Newly extracted I5-anterior teeth were invested with self-curing acrylic resin, and the labial surface was exposed. The exposed labial side was polished with abrasive papers and finally polished on polishing machine with zinc oxide powder. After the teeth were polished, the specimens were washed by water and dried by air. Surface roughness tester, Taylor-Habson's Taly Surf-10, (Fig-1) was used to measure roughness of this unetched tooth surface. And that, the specimens were divided into three groups. The first group was etched with Restodent etchant, the second group was etched with Nuva-system etchant, and Hi-pol etching agent was used in the third group. And the surface roughness tester was used to measure roughness of the etching teeth surface. The results obtained were as follows. 1. The roughness of acid-etched enamel were increased $2{\mu}m$ to $6{\mu}m$. 2. Hi-pol etchant produced the smoothest surface($2.3{\mu}m$). 3. Restodent etchant($3.8{\mu}m$) and Nuva-system etchant($3.7{\mu}m$) produced rougher surface than Hi-pol.
Freshly extracted permant teeth were examined by electron microscope according to the Filmy replica method. Preparatory method with hydrochloric acid or proteolytic enzyme treatment was used in order to injure the structural composition of enamel surface to compare between the natural carious defects and the etched samples used in this study. The natural carious defects were chalky white or brown discolored portions at the smooth enamel surface without having visible loss of enamel substances. The findings were as follows: 1. The first caries attact initiated from the mineralized portion of rod sheath which is located at the top of enamel rod. 2. The caries developed downward along the rod sheath interprismatic substances and enamel rods subsequently. However, the caries involvement of interprismatic substances and enamel rods occured almost at the same time. 3. The rod sheath attached to the remineralized smooth emael surface was located at the top of enamel rod.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.