• 한국직업건강간호학회지
• /
• 제19권2호
• /
• pp.217-222
• /
• 2010

Purpose: The purpose of this study was to assess the accuracy of references in articles published in Korean Journal of Occupational Health Nursing. Methods: All references in articles from 2007 to 2009 were compared with PubMed for authors, years, titles, journals, volume, and page accuracy. Four hundred twenty six references were reviewed. Errors were classified either major or minor. Results: Overall rate of inaccurate reference was 46.5%. 34.5% were major errors and 18.8% were minor errors. Most common major errors occurred in the authors, whereas most common minor errors occurred in the titles. Conclusion: It is necessary that authors, reviewers, and editorial committees make more efforts to enhance the reference accuracy.

• 대한간호학회지
• /
• 제38권1호
• /
• pp.180-185
• /
• 2008

Purpose: This study was to investigate the reference accuracy in major nursing journals in Korea. Methods: The references in articles from eight nursing journals from 2006 were compared with PubMed for authors, year, title, journal, volume, and page accuracy. Four hundred sixty-six references were reviewed. Errors were classified as major or minor and categorized by bibliographic headings (author, title, journal, year, volume and page). Results: Of the 466 references, 223 (47.9%) had citation errors. The reference error rates ranged from 28.6% to 58.7%. Most errors occurred in the author element (37.9%), followed by title (20.9%), journal (19.0%), page (13.9%), volume (5.9%), and year (2.4%). Conclusion: This study identified a considerable error rate in the references of nursing journals. Inaccuracy of references is a reflection on scholarly work of authors and journals. Authors and Editorial committees are responsible for the accuracy of references.

• Clinical and Experimental Pediatrics
• /
• 제45권11호
• /
• pp.1325-1331
• /
• 2002

목 적: '소아과'학회지와 소아과와 관련된 분과학회지에 실린 논문들의 참고문헌의 정확도를 조사하였다. 또한 자주 인용되는 참고문헌들을 분석하여 연구자들의 인용행태를 알아보고자 하였다. 방 법: 2000년도에 발행된 '소아과'학회지 3권과 2000년도에 발행된 9종의 소아과 분과학회지 한권씩을 골라 참고문헌의 정확도를 인터넷의 Medline에 들어가 일일이 비교하였다. 1964년 이전의 논문, 단행본, 영어 이외의 다른 언어로 쓰여진 논문은 인용행태 분석으로 활용하였다. 결 과 : 1) 각 학회지별 항목별 오류율은 저자에서 틀린 경우가 21.3%로 가장 높았고 논문 제목, 페이지, 학회지 이름, 권호, 발행년도 순이었다. 전체 오류율은 평균 34.7%였으며 전체 찾을 수 없는 경우는 89개로 2.2% 였다. 2) '대한신생아학회지'가 17.4%의 가장 낮은 오류율을 보였고 '소아심장'이 53.2%로 가장 높은 오류율을 보였다. 3) 최근 3년간 자료를 인용한 건수는 612개(15%)로 최신 논문 인용빈도가 매우 낮았다. 4) 외국 논문을 대부분 인용(78.4%)하였으며 국내 학회지 중 '소아과'학회지가 43.3%로 가장 많은 인용빈도를 보였다. 결 론 : 참고문헌의 정확도는 궁극적으로 저자들의 책임이다. 그러므로 저자들이 책임감을 가지고 참고문헌의 정확도를 점검하여야 한다. 또한 연구자들은 더 많은 최신 자료와 국내 자료를 활용하여야 한다.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1790-1800
• /
• 2006

Dynamic behavior of flexural-torsional coupled vibration of rotating beams using the Rayleigh-Ritz method with orthogonal polynomials as basis functions is studied. Performance of various orthogonal polynomials is compared to each other in terms of their efficiency and accuracy in determining the required natural frequencies. Orthogonal polynomials and functions studied in the present work are: Legendre, Chebyshev, integrated Legendre, modified Duncan polynomials, the special trigonometric functions used in conjunction with Hermite cubics, and beam characteristic orthogonal polynomials. A total of 5 cases of beam boundary conditions and rotation are studied for their natural frequencies. The obtained natural frequencies and mode shapes are compared to those available in various references and the results for coupled flexural-torsional vibrations are especially compared to both previously available references and with those obtained using NASTRAN finite element package. Among all the examined orthogonal functions, Legendre orthogonal polynomials are the most efficient in overall CPU time, mainly because of ease in performing the integration required for determining the stiffness and mass matrices.

• Journal of Information Processing Systems
• /
• 제10권4호
• /
• pp.523-542
• /
• 2014

One-dimensional arrays with subscripts formed by induction variables in real programs appear quite frequently. For most famous data dependence testing methods, checking if integer-valued solutions exist for one-dimensional arrays with references created by induction variable is very difficult. The I test, which is a refined combination of the GCD and Banerjee tests, is an efficient and precise data dependence testing technique to compute if integer-valued solutions exist for one-dimensional arrays with constant bounds and single increments. In this paper, the non-continuous I test, which is an extension of the I test, is proposed to figure out whether there are integer-valued solutions for one-dimensional arrays with constant bounds and non-sing ularincrements or not. Experiments with the benchmarks that have been cited from Livermore and Vector Loop, reveal that there are definitive results for 67 pairs of one-dimensional arrays that were tested.

• The Journal of Advanced Prosthodontics
• /
• 제13권4호
• /
• pp.205-215
• /
• 2021

PURPOSE. The purpose of this study was to compare the accuracy of three intraoral scanner (IOS) systems with three different dental arch widths. MATERIALS AND METHODS. Three dental models with different intermolar widths (small, medium, and large) were attached to metal bars of different lengths (30, 40, and 50 mm). The bars were measured with a coordinate measuring machine and used as references. Three IOSs were compared: TRIOS 3 (TRI), True Definition (TD), and Dental Wings (DW). The relative length and angular deviation of both ends of the metal bars from the scan data set (n = 15) were calculated and analyzed. RESULTS. Comparing among scanners in terms of trueness, the relative length deviation of DW in the small (1.28%) and medium (1.08%) arches were significantly higher than TRI (0.46% and 0.48%) and TD (0.33% and 0.18%). The angular deviation of DW in the small (1.75°) and medium (1.83°) arches were also significantly greater than TRI (0.63° and 0.40°) and TD (0.55° and 0.89°). Comparing within scanner, the large arch of DW showed better accuracy than other arch sizes (P < .05). On the other hand, the larger arch of TD presented a greater tendency of angular deviation in terms of trueness. No significant differences were found in terms of trueness between the arch widths of TRI group. CONCLUSION. The different widths of the dental arches can affect the accuracy of some intraoral scanners in full arch scan.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.1-5
• /
• 2016

The hardness of laser weldments has been predicted by using several carbon equivalent equations and estimation models. In this study, authors extended the model to boron steel sheets which are adopted for the hot press forming process. four kinds of boron steels with the strengths from 1500 MPa to 1900 MPa were considered and the hardness profiles of weldments was measured from the experiments of this study and the references. The traditional "Kaizu" equation could predict the hardness with an accuracy of -4.9% error although the Kaizu equation does not consider the boron content. Modified carbon equivalents were suggested by adding a term as like 5B or 14B into the Kaizu equation, and it could improve the accuracy of the prediction model.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.565-573
• /
• 2017

This paper presents a multistage in-flight alignment (MIFA) method for a strapdown inertial navigation system (SDINS) suitable for moving vehicles with no initial attitude references. A SDINS mounted on a moving vehicle frequently loses attitude information for many reasons, and it makes solving navigation equations impossible because the true motion is coupled with an undefined vehicle attitude. To determine the attitude in such a situation, MIFA consists of three stages: a coarse horizontal attitude, coarse heading, and fine attitude with adaptive Kalman navigation filter (AKNF) in order. In the coarse horizontal alignment, the pitch and roll are coarsely estimated from the second order damping loop with an input of acceleration differences between the SDINS and GPS. To enhance estimation accuracy, the acceleration is smoothed by a scalar filter to reflect the true dynamics of a vehicle, and the effects of the scalar filter gains are analyzed. Then the coarse heading is determined from the GPS tracking angle and yaw increment of the SDINS. The attitude from these two stages is fed back to the initial values of the AKNF. To reduce the estimated bias errors of inertial sensors, special emphasis is given to the timing synchronization effects for the measurement of AKNF. With various real flight tests using an UH60 helicopter, it is proved that MIFA provides a dramatic position error improvement compared to the conventional gyro compass alignment.

• 정보관리학회지
• /
• 제30권4호
• /
• pp.175-193
• /
• 2013

본 연구는 국내 대학도서관의 디지털참고정보서비스 현황을 분석하고 전자게시판을 중심으로 그 이용행태를 분석하여 향후 디지털 참고정보서비스 활성화를 위한 방법을 제언하고자 하였다. 205개 대학도서관 웹사이트를 분석하여 디지털참고정보서비스의 개괄적인 현황을 파악하고, 봉사대상 인구수와 도서관 웹 사이트 접속건수, 참고정보서비스 제공건수를 기준으로 선정된 4개의 대학에 실제 접수된 디지털 참고정보서비스의 질의유형, 답변의 구성형식, 정확성, 응답기간 등을 분석하였다. 본 연구의 결과가 대학도서관 디지털 참고정보서비스가 당면하고 있는 현실적 문제점을 파악하고, 이를 개선하기 위한 해결책으로 실제적인 지침과 모형개발의 기초자료로 활용되기를 기대한다.

• 한국한의학연구원논문집
• /
• 제8권1호
• /
• pp.45-53
• /
• 2002

Objectives : On the internet, the bibliographic information service systems of the theses for the degree of Korean medicine(KMT) have been builded by the National assembly library, the National library of Korea and the eleven central libraries of eleven colleges of Korean medicine in Korea(KMU). Because there was a lot of information of Korean medicinal research & development(R&D) in those KMT, the MKT are most valuable in the Korean medicinal R&D. This study was carried out to understand and analyze the information service systems of the theses of Korean medicine provided by those libraries. Methods : We collected the bibliographic information of KMT on the internet in the National assembly library, the National Library of Korea, KMU, and some references of KMT, and then made a comparison between the bibliographic information of KMT and those KMU about the simpleness of searching and the accuracy of the contents. Results : Many of the Korean medicinal information service systems of KMU are poor on the simpleness of searching and the accuracy of the contents. On the accuracy of the contents, the bibliographic information service systems of KMT mistakes about 20% because of misusing of a Chinese character, a rule of the initial sound of a syllable of the Korean alphabet, and an erroro of the term day on KMT.