• 한국초전도ㆍ저온공학회논문지
• /
• 제14권4호
• /
• pp.46-49
• /
• 2012

The selection of the temperature sensor in the cryogenic system depends on the temperature range, shape and accuracy. The accuracy of the temperature sensor is essential to improve the reliability of experiment. We have developed the variable temperature cryostat using a two-stage cryocooler. In order to reduce heat load, thermal shield is installed at the first stage with MLI (Multiple layer insulation). We have also developed the sensor holder calibrating more than twenty sensors at the same time for saving time and money. The system can calibrate sensor at variable temperature by controlling electric heater. In this paper, we present design and fabrication of variable temperature cryostat and representative result of Cernox sensor calibration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1086-1087
• /
• 2009

A small temperature sensor is designed in a 0.35um CMOS process. Transistors operating in the intermediate inversion region are employed in the core of the sensor. This temperature sensor operates in $-50^{\circ}C{\sim}120^{\circ}C$ with ${\pm}2^{\circ}C$ of accuracy after two-point calibration. This temperature sensor can be placed in the active pixel area of a display panel to measure the temperature of the display panel for temperature compensation.

• 센서학회지
• /
• 제28권6호
• /
• pp.414-419
• /
• 2019

An ultrasonic based magnetostrictive position sensor (MPS) provides an indication of real target position. It determines the real target position by multiplying the propagation speed of ultrasonic wave and the time-of-flight between the receiving signals; one is the initial signal by an excitation current and the other is the reflection signal by the ultrasonic wave. The propagation speed of the ultrasonic wave depends on the temperature of the waveguide. Hence, the change of the propagation speed in various environments is a critical factor in terms of the positioning accuracy in the MPS. This means that the influence of the changes in the waveguide temperature needs to be compensated. In this paper, we presents a novel way to improve the positioning accuracy of MPSs using temperature compensation for waveguide. The proposed method used the inherent measurement blind area for the structure of the MPS, which can simultaneously measure the position of the moving target and the temperature of the waveguide without any additional devices. The average positional error was approximately -23.9 mm and -1.9 mm before and after compensation, respectively. It was confirmed that the positioning accuracy was improved by approximately 93%.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1747-1754
• /
• 2016

본 논문에서는 고정밀 하이브리드 온 칩 온도센서를 제안하였다. 제안된 온도센서에서는 SAR 타입 온도센서와 ${\Sigma}{\Delta}$타입 온도센서를 혼합하였다. SAR 타입 온도센서는 ${\Sigma}{\Delta}$타입 온도센서 보다 온도를 찾아가는 속도가 빠르지만 오차가 발생할 확률이 높은 단점이 있고, ${\Sigma}{\Delta}$ 타입 온도센서는 SAR 타입 온도센서 보다 정확하지만 속도가 느린 단점이 있다. 제안된 온도 센서는 두개의 온도 측정방법을 혼합하여 고정밀 고속 온도측정이 가능하다. 또한, 칩 제작 후 온도 오차 값을 메모리회로에 저장하여 온도 오차를 보상하는 회로를 포함하여 온도센서를 구현하였다. 제안된 온도센서는 $0.35{\mu}m$ CMOS 공정으로 제작되었다. 온도 정확도, 소비 전력, 칩 면적은 각각 $0.15^{\circ}C$, $540{\mu}W$, $1.2mm^2$였다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2006년도 추계학술발표회 논문집
• /
• pp.123-128
• /
• 2006

This paper describes NDIR $CO_2$ gas sensor that shows the characteristics of temperature compensation. It consists of novel optical cavity that has two elliptical mirrors and a thermopile detector that includes ASIC chip in the same metal package for the amplification of detector output voltage and temperature sensor. The newly developed sensor modules shows high accuracy (less than +/-40 ppm) throughout the measuring concentration of $CO_2$ gas from 0 ppm to 2,000 ppm. After implementing the calculation methods of gas concentration, which is based upon the experimental results, the sensor module shows high accuracy less than +/- 5 ppm error throughout the measuring temperature range $(15^{\circ}C\;to\; 35^{\circ}C)$ and gas concentrations.

• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.1-12
• /
• 2020

Railway tracks are the direct supporting structures of the trains, which are vulnerable to produce large deformation under the temperature stress or subgrade settlement. The health status of track is critical, and the track should be routinely monitored to improve safety, lower the risk of excess deformation and provide reliable maintenance strategy. In this paper, the distributed optical fiber sensor was proposed to monitor the continuous deformation of the track. In order to validate the feasibility of the monitoring method, two deformation monitoring tests on one steel rail model in laboratory and on one real railway tack in outdoor were conducted respectively. In the model test, the working conditions of simply supported beam and continuous beam in the rail model under several concentrated loads were set to simulate different stress conditions of the real rail, respectively. In order to evaluate the monitoring accuracy, one distributed optical fiber sensor and one fiber Bragg grating (FBG) sensor were installed on the lower surface of the rail model, the strain measured by FBG sensor and the strain calculated from FEA were taken as measurement references. The model test results show that the strain measured by distributed optical fiber sensor has a good agreement with those measured by FBG sensor and FEA. In the outdoor test, the real track suffered from displacement and temperature loads. The distributed optical fiber sensor installed on the rail can monitor the corresponding strain and temperature with a good accuracy.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.421-425
• /
• 2005

A distributed FBG temperature sensor system was constructed for the use in protection of electric power system. A F-P wavelength tunable filter is used converting temperature-induced wavelength variations to temporal peak locations. We used Gaussian line-fitted algorithm to alleviate the error caused by quantization and electrical noises. The experimental results showed much better accuracy than the raw peak-detection scheme.

• 센서학회지
• /
• 제26권1호
• /
• pp.35-38
• /
• 2017

A thermally responsive hydrogel has reversibility with temperature during swelling. Here, we proposed origami inspired temperature sensor by using multi-layered hydrogel film. The formation of patterned stripes on microscale film drives bending to an angle that can be controlled linearly. Although temperature range was not wide, measured sensitivity of sensors has high resolution and accuracy. It providing a powerful platform for the design of sensitive sensors and that easily adapt other type of sensors in microscale.

• 한국측량학회지
• /
• 제36권4호
• /
• pp.263-270
• /
• 2018

지표면 온도는 지면-대기의 상호 순환을 이해하는데 중요한 요소로 알려져 있지만 시공간적 변동성이 크기 때문에 정규적인 관측은 거의 이루어지지 못하고 있다. 기존의 지표면 온도는 위성 영상을 이용하여 관측하고 있지만 위성의 특성상 긴 재방문주기와 낮은 정확도의 한계를 가지고 있다. 본 연구에서는 기존의 위성 영상을 활용한 지표면 온도 관측의 대체가능성을 확인하기 위해 무인항공기에 열적외선 센서를 탑재하여 단일 영상을 취득하였다. 취득된 영상은 JPEG 영상에서 TiFF 영상으로 변환하여 정사영상을 제작하였으며 정사영상의 DN값을 이용하여 실제 지표면 온도로 계산하였다. 계산된 피복별 지표면 온도의 정확도를 평가하기 위해 영상촬영과 동시에 적외선 온도계로 직접 관측한 지표면 온도와 비교하였다. 두 가지 방법으로 관측한 지표면 온도를 비교 했을 때, 모든 피복들에 대해서 정확도가 열적외선 센서의 관측 정확도 이하로 나타났다. 따라서 무인항공기에 탑재된 열적외선 센서를 이용하여 기존의 지표면 온도 관측 방법인 위성 영상의 대체 가능성을 확인하였다.

• 센서학회지
• /
• 제19권6호
• /
• pp.483-489
• /
• 2010

Display quality depends on panel temperatures. To compensate it, temperature sensor was integrated on the panel. The conventional temperature sensor integrated on the panel needs external reference resistor. Since the resistance of external resistor can vary according to the variation of the environment temperature, the conventional temperature sensor can make error in temperature sensing. The environmental temperatures can change by the back light unit, driving circuits or chips. In this paper, we proposed a integrated temperature sensor on display panel which does not need external reference resister. Instead of external reference resistor, we used two materials which have different temperature coefficient in resistivity. They are connected serially and the output voltage was measured at the point of connection with the applied voltage to both ends. The proposed sensor was fabricated with indium tin oxide(ITO), and Mo metal electrode temperature sensor which were connected serially. We verified the temperature senor by the measurements of sensitivity, lineality, hysteresis, repeatability, stability, and accuracy.