• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.18-29
• /
• 2002

As the inaccuracy which was made in implant impression prevented passive fit, it needed to solder the sectioned framework at several locations to correct the inaccuracy. Many clinicians have suggested impression techniques which could make passive fit between implant and superstructure. The purpose of this research was to measure and compare the accuracy of three methods of taking impression with the strain amplifier. The experimental groups were classified as follows : Group I : splinted the two parts with $Futar^{(R)}D$ Occlusion. Group II : splinted the two parts with $DuraLay^{(R)}$. Group III ; didn't splint the two parts. The results were as follows ; 1. The values of strain in the vertical and horizontal surfaces were increased in the order of group I, group II and group III. 2. Group 1 showed higher accuracy of the duplicated casts in the vortical and horizontal sur faces than group II and group III (p<0.05). 3. There were no significant differences in the accuracy of the duplicated casts between group II and group III. From the above results, it is considered that the splinting method of impression copings could make an influence on the accuracy of the master casts. To improve the accuracy of the master casts, splinting the squared impression copings with the additional silicone occlusion materials is recommendable.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.139-148
• /
• 2012

PURPOSES : The accuracy of travel time information is a key measure of effectiveness and reliability of advanced traveler information systems. This study aims at investigating drivers' perception on the acceptable level of information accuracy and their corresponding valuations. METHODS : A questionnaire survey was executed for collecting driver perception data to capture the expectation level of travel time information provided and their willingness to pay for the information. A Tobit model was adopted for exploring the relationship among the acceptable level, driver socioeconomic characteristics and travel attributes. Since drivers' willingness to pay for accurate travel time information can be different according to their travel lengths, a piecewise linear regression model was developed to capture the sensitivity of values of travel time information to travel length. RESULTS : The analysis results suggest that trip purpose and travel time are two dominant factors to determine drivers' acceptable level of travel time information. For business and short trips, drivers want more accurate information than for non-business and long trips. Drivers' willingness to pay for travel time information also varies depending on their incomes, trip purposes and travel lengths. The results also show that drivers' valuation of travel time information provided is sensitive to their travel length. For longer trips, drivers are less sensitive to travel time information and then put less value on the information provided. CONCLUSIONS : Censored nonlinear regression models are developed to estimate drivers' acceptable accuracy for travel time information and their valuation using questionnaire survey data. The findings on drivers perception to the required accuracy of travel time information and their corresponding willingness to pay can be used in the design and deployment of advanced traveler information system to improve its effectiveness and usefulness through high compliance.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.5
• /
• pp.327-332
• /
• 2021

PURPOSE. The purpose of this in vitro study was to evaluate the accuracy of digitally designed removable partial denture (RPD) frameworks, constructed by additive and subtractive methods castable resin patterns, using comparative 3D analysis. MATERIALS AND METHODS. A Kennedy class III mod. 1 educational maxillary model was used in this study. The cast was scanned after modification, and a removable partial denture framework was digitally designed. Twelve frameworks were constructed. Two groups were defined: Group A: six frameworks were milled with castable resin, then casted by the lost wax technique into Co-Cr frameworks; Group B: six frameworks were printed with castable resin, then casted by the lost wax technique into Co-Cr frameworks. Comparative 3D analysis was used to measure the accuracy of the fabricated frameworks using Geomagic Control X software. Student's t-test was used for comparing data. P value ≤ .05 was considered statistically significant. RESULTS. Regarding the accuracy of the occlusal rests, group A (milled) (0.1417 ± 0.0224) showed significantly higher accuracy than group B (printed) (0.02347 ± 0.0221). The same results were found regarding the 3D comparison of the overall accuracy, in which group A (0.1501 ± 0.0205) was significantly more accurate than group B (0.179 ± 0.0137). CONCLUSION. In indirect fabrication techniques, subtractive manufacturing yields more accurate RPDs than additive manufacturing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.2
• /
• pp.276-283
• /
• 2007

It has been shown that the structure identification of a neuro-fuzzy model improves their accuracy performances in a various modeling problems. In this paper, we claim that the structure identification of a neuro-fuzzy model can also reduce the degree of inconsistency of its fuzzy rulebase. Thus, the resulting neuro-fuzzy model serves as more like a structured knowledge representation scheme. For this, we briefly review a structure identification method of a neuro-fuzzy model and propose a systematic method to measure inconsistency of a fuzzy rulebase. The proposed method is applied to problems or fuzzy system reproduction and nonlinear system modeling in order to validate our claim.

• Physical Therapy Korea
• /
• v.12 no.4
• /
• pp.20-25
• /
• 2005

The Gross Motor Function Measure (GMFM) is an internationally widely used outcome measure. The aim of this study was to evaluate the structural properties of the Korean version of GMFM using the Rasch Model, with regard to scoring within rehabilitation centers in Korea. GMFM data for 206 children with cerebral palsy were collected from 11 outpatient rehabilitation facilities by 29 pediatric therapists. The Winsteps software was used to refine the rating scale. This study suggests that the scoring categories of the Korean version of the GMFM should be collapsed from 0 (subject does not initiate task), 1 (subject initiates task), 2 (subject partially completes task), 3 (subject completes task) to 0 (subject does not initiate task), 1 (subject initiates or partially completes task), 2 (subject completes task) for better accuracy in estimating the gross motor function of children with cerebral palsy.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.931-936
• /
• 2006

This paper presents different issues of the real-time compression algorithms without compromising the video quality in the distributed environment. The theme of this research is to manage the critical processing stages (speed, information lost, redundancy, distortion) having better encoded ratio, without the fluctuation of quantization scale by using IP configuration. In this paper, different techniques such as distortion measure with searching method cover the block phenomenon with motion estimation process while passing technique and floating measurement is configured by discrete cosine transform (DCT) to reduce computational complexity which is implemented in this video codec. While delay of bits in encoded buffer side especially in real-time state is being controlled to produce the video with high quality and maintenance a low buffering delay. Our results show the performance accuracy gain with better achievement in all the above processes in an encouraging mode.

• The Journal of Society for e-Business Studies
• /
• v.6 no.3
• /
• pp.17-40
• /
• 2001

In this study we tried to measure the user satisfaction with IT in small firms. Though the number of small firms is not negligible, most studies on the IT satisfaction focused on medium and large-sized firms. Using Palvia's model in 1999 we measured If satisfaction of the employee in small firms in the manufacturing and telecommunication industry. We included seven constructs such as S/W pertinence, information content and accuracy, information format, system usefulness, system continuance, and system support to measure IT satisfaction. The result suggests that the If users in small firms are generally dissatisfied with the information technology and the areas of deep dissatisfaction are system usefulness and system support. Type of business, the gender and education of the users are found to affect the level of satisfaction.

• Journal of Welding and Joining
• /
• v.6 no.3
• /
• pp.37-42
• /
• 1988

The Hole Drilling Method(HDM) is widely used to measure residual stresses in the welded structures. The purpose of this study is to evaluate the accuracy fo measuring residual stresses when drilling the hole by Air-abrasive Jet machine(AJM). Simulated residual stresses wre introduced by applying known stresses to steel bars. These known streses were then compared with measured stresses relaxed from hole drilling. the obtained results are summarized as follows; 1) It was possible to obtain well defined holes with the nozzle designed for this study. 2) If the hole shape is not cylindrical, critical may occur. 3) In the uniaxial strain field, the measurement error of the maximum principal stress was within .+-.10 percent. The orientation angle of the maximum principal stress was within 8.deg. from the given directioin. 4) meausrements were made varying hole depths. Little or no change of stresses occurs since holse were drilled more than the depth of the 0.6 times diameter. 5) The air-abrasive jet machining for drilling holse does not cause appreciable apparent stresses which si critical to measure residual stresses.

• Korean Management Science Review
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2005

This paper proposed a quantitative evaluation method to measure the operational effectiveness of the local military manpower administrations. The proposed method compared the relative operational effectiveness level for 12 local military manpower administrations in Korea.. The method used the IDEA (imprecise Data Envelopment Analysis) model which Is able to measure relative operational effectiveness level, and also used two input variables (labor cost, operational cost) and three output variables (number of military applicants, number of civil application approved & processed, management accuracy level). Through the model output analysis, we presented the relative effectiveness scores, the reason for non-effectiveness, and the relationship between non-effective ness level and input/output variables for each local military manpower administration. We also presented a few recommendations how to improve the effectiveness level on particular local military manpower administration.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.152-159
• /
• 2000

In piercing operation for small hole in very thin plate, micro burrs are formed. The micro burr is very difficult to remove because the thin plate is to be deformed during deburring and deteriorate accuracy. As a first step to remove the micro burrs effectively, the burr must be measured accurately as much as possible. For most micro burrs are so small as less than 10$\mu\textrm{m}$, it is very difficult to measure. Several methods are reviewed to measure the micro burr formed in piercing operation from very thin plate with thickness less than 0.1mm. Also the effective deburring methods are reviewed. Barreling ultrasonic and chemical deburring methods are performed and the results are compared.