• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.969-977
• /
• 2022

Currently, in Korea, aerial photogrammetry is being studied for cadastral boundaries and numerical maps. Since the announced value of cadastral survey is closely related to ownership, the accuracy and reliability of the published value should be emphasized above all else. However, although aerial photogrammetry has great advantages in economic feasibility and surveying efficiency, it has many limitations when extracting the boundary of cadastral survey based on the acquired image. In order to improve these limitations, in this study, an aerial target was applied to obtain reliability improvement. Therefore, in order to examine the usefulness of aerial photogrammetry for cadastral survey application, cadastral boundary extraction and accuracy comparison analysis were conducted.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.169-185
• /
• 2019

While images and aerial photographs using conventional satellites have the advantage of providing data in a vast area, there is a difficult aspect: the limitations of filming and processing data in a particular region at a desired time and the repetitive filming of a short cycle. With the development of many new technologies to overcome these shortcomings, methods of building cadastral information are changing rapidly. In particular, unmanned aerial vehicles that deploy cadastral information quickly and accurately using UAV have increased interest in technology that obtains cadastral information. Therefore, the purpose of this study was to suggest the application of cadastral measurement tasks in areas subject to cadastral measurement using UAV. To this end, the Commission decided to compare and analyze the accuracy of high-resolution images produced by observation area and apply them to existing cadastral work using verified images and cadastral data. In this study, we will analyze the applicability of UAVs to their cadastral survey by analyzing the current status of legislation related to cadastral survey and the technical characteristics of UAVs and propose technological, legal and institutional improvement measures for introduction based on them.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.33-40
• /
• 2014

At present, Cadastral map of 2 dimensional is in the stream of changing it to 3 dimensional type supported by GPS and laser techniques. In addition, this steam can be explained at the same time with improvement of equipment of storing much information, support of equipment for imaginative 3D spatial information, and support of equipment of expressing land in 3D Cadastral. This study suggest to apply airborne lidar survey technique on cadastral map to acquire comparably and quickly detailed height of ground. For doing this, this study checked out credibility regarding accuracy of airborne lider survey. After choosing research area, this study has done the airborne lidar survey and acquire the result after surveying Cadastral Comparison Point to check out the accuracy of acquired results. In addition, this study check out the result of Cadastral Comparison Point and airborne lidar survey applied by paired sample t-test based on actual results. The result is that test statistics is 0.322 which is 5 % similar level and null hypothesis cannot be rejected, so this study found out that result of both survey ways are the same. Therefore, the result of airborne lidar survey can be utilized to build up 3D Cadastral information hereafter.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.2 s.36
• /
• pp.23-32
• /
• 2006

This study shows that new methodology improved the problem of unaided eye test level with the digital orthophoto technique can survey more objectively and efficiently any cadastral non-coincidence than existing prior methodologies. For applying to it, we explore eligible other methodologies, and then build up the application strategy of them. New prototype system is implemented with it. Also, we say the availability of new methodology by applying to study area. As a result, we suggest cadastral non-coincidence surveying method based on point-correspondence more objective and more efficient. As a result of comparing with old method and new on same study area for making adequacy, they hardly ever has the difference of accuracy. Constantly, cadastral non-coincidence surveying method based on point-correspondence is acceptable way on the cadastral survey.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.546-554
• /
• 2014

For improvement of network RTK performance in survey field, Spatial Information Research Institute (SIRI), LX Korea Cadastral Survey Corporation installed 30 GNSS permanent stations in Korea Peninsula, and has been running the MAC-based network RTK service as a test version. In this paper, we introduce the LX GNSS network and analyze the positioning accuracy of the LX MAC RTK service. For field test of the LX MAC RTK service, we installed temporally fixed anchor points and observed simultaneously with VRS of National Geographic Information Institute. As a result, the horizontal position differences and initial times of LX MAC with respect to NGII VRS are $1{\sim}2{\pm}1cm$ and <10 seconds, respectively.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.2
• /
• pp.223-230
• /
• 2015

Due to the conversion from the existing address system to road name address system, the versatility of the road name address from the public and private sectors is increasing gradually. Therefor, the reliability of the road name address basic map, of the default data is also an urgent need, this means the accuracy of the data. But, road name address basic map is production time due to the use of different map accuracy is to fall, so is also the situation insufficient of utilization. This study Construction of identify each attempt by the road name address basic map and analysis the location accuracy of road name address basic map. As a result, the RMSE of cadastral survey results showed that appears lower than the RMSE of digital map survey results. The judgment can be utilized as the basis for the proposed improvements for the road name address basic map.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.411-415
• /
• 2006

In recent years there has been considerable interest in the network GPS RTK surveying. Single RTK has some limit in long distance and it has an accuracy problem depend on the baseline length. The significant improvement of GPS network technology, RTCM V3.0 correction format and telecommunication technology can eliminate the weakness of single GPS RTK. This paper is the practical field result of GPS network RTK.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.23-24
• /
• 2014

NGII (National Geographic Information Institute) has been providing VRS (Virtual Reference Station) service so that could determine precise positioning in real time since 2007. However, since the VRS service has to maintain the connected status with VRS server, the number of users who can use VRS service are limited by capacity of VRS server. To solve this problem, NGII has been providing FKP (Virtual Reference Station) service using one way telecommunication from November 1, 2012. Therefore, it is predicted that the usage of FKP service will increase in public surveying and cadastral resurveying in the future. However, the studies with respect to analysis of FKP precision for applying to public surveying and cadastral resurveying is not conducted enough. In this study, to analyse the application possibility of FKP on the public surveying and cadastral resurveying, the two kind analysis were performed. First is the analysis of accuracy according to the configuration of reference station of FKP and VRS. One is consisted of same reference stations, another is consisted of different reference stations. Second is the accuracy anlalysis of horizontal and vertical positioning acquiring VRS and FKP data in various measurement environment based on VRS regulation. Result of first study, Positioning accuracy according to the configuration of the reference stations satisfies related regulation. However, accuracy of FKP in case of different reference stations is worse than in case of same reference stations.. The result of second test shows that the horizontal precision of FKP and VRS in good measurement environment satisfy the allowed precision. However, in some case, horizontal precision of FKP and VRS in poor measurement environment exceed the allowed precision. In addition, the number of exceeding the allowed precision in the FKP is more than the VRS. The vertical precision of the VRS satisfy related work provision. In conclusion, the result of this study shows that the FKP only in open area should be used for public survey and cadastral resurvey. Therefore the additional studies with respect to the improvement of FKP precision should be conducted.