• Title/Summary/Keyword: Accumulation factor

Search Result 678, Processing Time 0.023 seconds

Visualization of Electro-osmotic Flow Instability in a T-shape Microchannel (T자형 마이크로 채널 내부 전기삼투 유동의 불안정성 가시화)

  • Han, Su-Dong;Lee, Sang-Joon
    • Journal of the Korean Society of Visualization
    • /
    • v.3 no.2
    • /
    • pp.45-50
    • /
    • 2005
  • Electro-osmotic flow (EOF) instability in a microchannel has been experimentally investigated using a micro-PIV system. The micro-PIV system consisting of a two-head Nd:Yag laser and cooled CCD camera was used to measure instantaneous velocity fields and vorticity contours of the EOF instability in a T-shape glass microchannel. The electrokinetic flow instability occurs in the presence of electric conductivity gradients. Charge accumulation at the interface of conductivity gradients leads to electric body forces, driving the coupled flow and electric field into an unstable dynamics. The threshold electric field above which the flow becomes unstable and rapid mixing occurs is about 1000V/cm. As the electric field increases, the flow pattern becomes unstable and vortical motion is enhanced. This kind of instability is a key factor limiting the robust performance of complex electrokinetic bio-analytical devices, but can also be used for rapid mixing and effective flow control fer micro-scale bio-chips.

  • PDF

Thermodynamic and Isothermal Studies of Congo RedAdsorption onto Modified Bentonite

  • Basava Rao., V. V.;Mohan Rao., T
    • Korean Chemical Engineering Research
    • /
    • v.53 no.6
    • /
    • pp.770-775
    • /
    • 2015
  • Adsorption of Congo Red (CR) from dye-containing effluents using modified bentonite (MB) has been investigated here. Isothermal studies were conducted to ascertain maximum adsorption capacity of the adsorbent. MB exhibited superior adsorption capacity compared to other low-cost adsorbents. Experimental data fitted the Langmuir isotherm better, indicating monolayer coverage of CR on MB. The feasibility of the process was measured in terms of separation factor $R_L$. The values of Gibbs free energy, entropy and enthalpy were calculated from the thermodynamics of the process. Adsorption was feasible and spontaneous, being endothermic. Analytical techniques including SEM, EDS, FTIR and XRD were applied to characterize MB and also to provide conclusive proof of the accumulation of CR on to MB.

Environmental Risk Factors for Children and Adolescents Suffering from Depressive Disorder : Clinical Aspects (소아청소년 우울증에서의 환경적 위험 인자들과 임상적 의미)

  • Lee, Moon-Soo
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • v.21 no.3
    • /
    • pp.141-146
    • /
    • 2010
  • This summary of literature during the past year reviews published studies relating to risk factors for depressive disorders in children and adolescents. Risk factors include environmental toxins, socio-environmental, and genetic factors. As depression has a complex, multifactorial causal mechanism, it is likely that the accumulation and/ or interaction among multiple risk factors lead to depression. Findings related to the result of toxin exposure have been difficult to interpret given that risk factors tend to interact and that higher mental functions are not easily measurable. However, some findings have been consistent. Clinical research data has also shown that the risk for negative outcomes may be modified both by genetic and environmental factors through a gene environment interplay mechanism.

Global Carbon Budget and Ocean Buffering against Rising Atmospheric CO2 Concentration

  • Kwon, O-Yul
    • Journal of Environmental Science International
    • /
    • v.11 no.8
    • /
    • pp.773-781
    • /
    • 2002
  • The natural carbon cycle has been perturbed since the mid-19th century by anthropogenic CO$_2$emissions from fossil fuel combustion and deforestation due to population growth and industrialization. The current study simulated the global carbon cycle for the past 42 years using an eight-box carbon cycle model. The results showed that since the terrestrial biospheric carbon sink was roughly offset by the deforestation source, the fossil fuel emission source was partitioned between the atmospheric and oceanic sinks. However, the partitioning ratio between the atmosphere and the ocean exhibited a change, that is, the carbon accumulation rate was faster in the atmosphere than in the ocean, due to a decrease in the so-called ocean buffering capacity. It was found that the ocean buffering capacity to take up excess CO$_2$decreased by 50% in terms of the buffer factor over the past 42 years. Accordingly, these results indicate that if the current CO$_2$emission trend continues, the future rate of increase in the atmospheric CO$_2$concentration will accelerate.

Fatigue Strength Assessment of a Ship Structures using the Influence Coefficient Concept and Spectral Analysis Technique (영향계수법과 스펙트럼 해석법을 이용한 선체의 피로강도평가)

  • Nho, I.S.;Kim, J.K.;Yoon, J.H.
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.34 no.2
    • /
    • pp.75-84
    • /
    • 1997
  • The up-to-date fatigue strength assessment system for ship structures was developed based on the spectral analysis method and numerical calculation for a membrane type LNG carrier was carried out to verify the effectiveness of the developed system. The wave induced loads acting on the ship's hull were calculated based on strip theory. And introducing the concept of influence factor and 3-D fine mesh structural analysis, direct calculation of long-term distribution of wave induced stress components was realized. Using the derived long term distribution of stress components and Miner-Parmgren's linear damage accumulation rule, fatigue strength of structural components were investigated.

  • PDF

Study on the Characteristics of Nitrification and Denitrification using Attached Microorganism (부착성 미생물을 이용한 질산화 및 탈질특성에 관한 연구)

  • Kwon, Moonsun;Lee, Euisin
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.8 no.3
    • /
    • pp.19-25
    • /
    • 1994
  • In this research, characteristics of nitrification and denitrification using the microorganism attached on sponge and plates were examined. The denitrification and nitrification performance were investigated under the anaerobic and aerobic condition for about 2 months. Because the basins of denitrification and nitrification were connected in series, wastewater was flowed from denitrification basin to nitrification one. The 90% of influent flowrate was returned from nitrification basin to denitrification one. Most of organic material was removed in nitrification basin, wherease the only exact amount of organics required in denitrification process was removed in denitrification one. This experiment resulted in that heterotrophic bacteria existing in aerobic basin governed the removal efficiency of organic compounds. In case the influent BOD concentration into nitrification basin was 80mg/l, it did not affect to accumulation of nitrifying bacteria, the balance of heterotrophic bacteria was proved to be an important factor in nitrification/denitrification method such as anaerobic and aerobic cycling type.

  • PDF

Effect of Beating Time and Fines Content on the Drainage Properties of BKP (고해처리와 미세분 함량에 따른 BKP의 탈수특성변화)

  • 성용주;이학래
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.31 no.1
    • /
    • pp.52-60
    • /
    • 1999
  • Drainage rate in wet-end, which has significant influences on the production capacity, product quality and process economics in papermaking, becomes an important factor in the modern high speed papermaking processes owing to increased level of fines contained in today's pulp materials and increased papermaking system closure. A study was carred out to investigate the influence of beating and fines content on natural and vacuum dewatering using a vacuum drainage tester. Increase in beating and accumulation of fines in the stock decreased natural dewatering, Vacuum dewatering effect, however, increased substantially as beating and fines content were increased. But this increase in vacuum dewatering decreased again when a stock is severely beaten or fines content is greater than 35%. Above this level of fines content, mobile fines migrates to the interstices of the forming web to cause sealing or plugging which restrict fluid movement through the web.

  • PDF

Improved Efficiency and Lifetime for Organic Light-emitting Devices based on Mixed-hole Transporting Layer (혼합된 정공 수송 층을 이용한 유기발광소자의 효율 및 수명 개선)

  • Seo, Jl-Hyun;Park, Jung-Hyun;Park, Il-Hong;Kim, Jun-Ho;Kim, Young-Kwan
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.20 no.3
    • /
    • pp.257-262
    • /
    • 2007
  • Organic light-emitting diodes (OLEDs) with the high efficieney and long lifetime are of growing interest in next-generation displays. Among the factors influencing OLEDs properties, one of unstable factor is $Alq_3$ cationic species caused by the excess holes resided in $Alq_3$ layer. Therefore, we suppressed the accumulation of excess holes by using the mixed-hole transporting layer (MHTL) of NPB and CBP in multilayer green OLEDs. The devices with MHTL showed improved characteristics in the luminous efficiency and lifetime. More characteristics and the carrier transport mechanism will be discussed.

The Influence of Repeated Loading Cycles on Strength Ratio of Carbon/Epoxy Composite Laminates (Carbon/Epoxy 복합재료 적층판의 반복하중에 따른 강도계수의 변화에 대한 연구)

  • Kim, Doo-Hwan;Kim, Young-Feel
    • Journal of the Korean Society of Safety
    • /
    • v.24 no.3
    • /
    • pp.19-24
    • /
    • 2009
  • Currently the technique of composite material field is developed day by day. The many kinds industrial facility and life articles are coming to make with the composite material. But still the engineering works field the building and the bridge uses the material which is old era and is making. To here there is a various problem but the biggest problem the theory of the composite material is complicated too and means that the application is been delayed about constructive structure. When the composite material is used widely from constructive field, too with difficult theory in technical expert and easily with the research for the experiment data accumulation is necessary. The tensile and fatigue test of the carbon/epoxy which is a high-class composite material led from the present paper consequently and the change of the intensity coefficient which follows in repeated load researched.

Complement regulation: physiology and disease relevance

  • Cho, Heeyeon
    • Clinical and Experimental Pediatrics
    • /
    • v.58 no.7
    • /
    • pp.239-244
    • /
    • 2015
  • The complement system is part of the innate immune response and as such defends against invading pathogens, removes immune complexes and damaged self-cells, aids organ regeneration, confers neuroprotection, and engages with the adaptive immune response via T and B cells. Complement activation can either benefit or harm the host organism; thus, the complement system must maintain a balance between activation on foreign or modified self surfaces and inhibition on intact host cells. Complement regulators are essential for maintaining this balance and are classified as soluble regulators, such as factor H, and membrane-bound regulators. Defective complement regulators can damage the host cell and result in the accumulation of immunological debris. Moreover, defective regulators are associated with several autoimmune diseases such as atypical hemolytic uremic syndrome, dense deposit disease, age-related macular degeneration, and systemic lupus erythematosus. Therefore, understanding the molecular mechanisms by which the complement system is regulated is important for the development of novel therapies for complement-associated diseases.