• 한국컴퓨터정보학회논문지
• /
• 제23권3호
• /
• pp.63-70
• /
• 2018

In this work, we analyze the relationship between the accumulated mileage of hybrid electric vehicle(HEV) and the data provided from vehicle parts. Data were collected while traveling over 70,000 Km in various paths. The data collected in seconds are aggregated for 10 minutes and characterized in terms of centrality, variability, normality, and so on. We examined whether the statistical properties of vehicle parts are different for each cumulative mileage interval of a hybrid car. When the cumulative mileage interval is categorized into =< 30,000, <= 50,000, and >50,000, the statistical properties are classified by the mileage interval as 82.3% accuracy. This indicates that if the data of the vehicle parts is collected by operating the hybrid vehicle for 10 minutes, the cumulative mileage interval of the vehicle can be estimated. This makes it possible to detect the abnormality of the vehicle part relative to the accumulated mileage. It can be used to detect abnormal aging of vehicle parts and to inform maintenance necessity.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.165.1-165.1
• /
• 2010

In the past, drivers bought a fuel additives to treat a combustion chambers or injector nozzles for carbon or gum deposit at market. But, nowadays, as raised cost of fuel for a vehicle the consumers also start focusing on a function of fuel additives that increases fuel economy of one. Some fuel additive manufacturers and agents advertise that their goods make a car it's initial state. This paper shows data for 3 years that were acquired during test for registration of an additive in domestic. The data were sorted according to kind of vehicle, kind of fuel, test mode, CO, HC, NOx, PM, total emission, fuel economy and accumulated mileage. And than by using simple linear regression analysis changes according to accumulated mileage was displayed. Normal distribution and histogram of rate of increase and decrease were displayed. the analyzed data indicated that a fuel additive maintain and make a car the first state of one but can't make a car be batter than initial the one.

• 항공우주정책ㆍ법학회지
• /
• 제25권2호
• /
• pp.163-199
• /
• 2010

최근 수년간 항공 마일리지의 이용제한 문제가 여러 차례 사회적 이슈로 부각돼 왔다. 그 이유는 무엇보다 마일리지의 법적 성격에 대한 항공사와 소비자의 견해가 다르다는 점에 있다고 볼 수 있다. 항공사는 마일리지를 항공운송서비스나 제휴사의 재화 또는 서비스이용에 대한 보상으로 여긴다. 이와 달리 소비자는 굳이 다른 경쟁 항공사들을 포기하고 특정항공사를 계속 이용한 것에 대한 경제적 인센티브 또는 구매금액에 포함된 것으로 유상으로 취득한 채권적 청구권으로 생각한다. 이에 이 글은 항공사의 마일리지 이용약관에 대한 공정거래위원회의 불공정성 심사를 계기로 마일리지 회원계약의 유상성 및 마일리지의 법적 성격을 살펴보았다. 항공운송업의 영업적 특성과 마일리지의 경쟁적 회계적 성격을 종합적으로 고려해볼 때 마일리지는 일정한 대가관계에 기초하여 취득한 것으로서 마일리지 회원계약은 유상계약으로 판단된다. 기업회계기준이 마일리지를 선수 수익으로 인식하여 부채로 계상하도록 하고 점, 제휴마일리지 제도를 통하여 막대한 수익을 얻는 점 등을 고려할 때에 '마일리지회원계약'을 무상계약이라고 보는 것은 무리가 따른다고 할 수 있으며, 판례나 조정례에서 살피는 것과 같이 마일리지 회원계약을 유상 쌍무계약으로 보는 것이 타당하다. 그러므로 소비자는 항공사에 대해 마일리지라는 조건부 채권을 가진 채권자이며, 반대로 마일리지 채무자에게는 마일리지 이용을 단순히 인용 허용하는 소극적 의무만이 아니라 마일리지 이용에 하자가 있을 경우에 이를 치유해야 할 적극적 의무가 있다고 보아야 할 것이다. 따라서 이러한 채무자가 의무를 위반하는 경우에 채무자는 그로 인해 발생하는 손해에 대해 배상책임을 부담하며, 조건부 법률행위에서 조건의 성취를 약관변경을 통해 제한하는 것은 고객에게 부당하게 불리한 약관조항인 동시에 계약상대방의 권리실현 조건의 성취를 방해하는 것으로 소비자의 권리를 침해하는 반신의행위(민법 제150조)에 해당할 수 있다고 보았다. 또한 이러한 약관은 약관규제법 제6조 제2항 제1호 '고객에게 부당하게 불리한 조항'으로 공정성을 잃은 것으로 추정되어 무효가 될 수 있음을 살펴보았다.

• 한국분무공학회지
• /
• 제22권1호
• /
• pp.8-12
• /
• 2017

Recently, manufacture and sales of passenger car with GDI (Gasoline Direct injection) were dramatically increased in Korea. In this study, investigation on the exhaust emission characteristics of GDI vehicles according to mileage were conducted by using chassis dynamometer and emission analyzer. Test cars selected 5 types with G4FD engine (1600 cc) and emissions of total 14 vehicles analyzed. Measurement and evaluation on emissions (CO, NOx, NMOG, $CO_2$) characteristics of GDI vehicles with mileages from 40,000 to 80,000 km in certification driving cycle (CVS-75) were carried out in this study. It is revealed that emission results of all test cars shows below emission standard, NMOG emission value of about 80,000 km doubled that of 40,000 km and emission increased by accumulated mileage. Also, increasing pattern of NOx emissions shows when the vehicle mileages was increased and $CO_2$ emission increasing trend obviously do not show according to mileages.

• 한국분무공학회지
• /
• 제23권3호
• /
• pp.128-135
• /
• 2018

In this study, the following conclusions could be obtained from the analysis of emissions contribution rates and features for contaminated emissions by 13,456 gasoline vehicles passed in the vehicle load test (ASM-idle) under the inspection year 2013 to 2017. It was confirmed that the contamination of the CO, HC, NOx by the displacement is reduced on over 3L engine. As a result of comparing the exhaust gas in the low speed idle mode and the AS2525 mode, the exhaust gas in the low speed idle mode was measured high. It is estimated that if ISG function is applied, emissions from idle condition will be reduced. NOx emissions were reduced when the engine power was above 200HP. It has been confirmed that the amount of exhaust emissions are significantly reduced for vehicles manufactured after 2004. As a result of analyzing the exhaust gas according to the season, it is judged that there is a correlation between HC and NOx according to the ambient temperature. The concentration of exhaust emission in vehicles with high accumulated distance increases, which is considered to be the result of aging of the vehicle.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.25-31
• /
• 2003

There are a lot of factors influencing on the automobile fuel economy such as average speed, average acceleration, acceleration sum per kilometer, and so on. In this study, various driving data were recorded during road tests. The accumulated road test mileage in Seoul metropolitan area is around 1,300 kilometers. The data were analyzed by multivariate statistical techniques including correlation analysis, principal component analysis, and multiple linear regression analysis. The analyzed results show that the average trip time per kilometer is one of the most important factors to fuel consumption and the increase of the average speed is desirable for reducing emissions and fuel consumption.

• 품질경영학회지
• /
• 제15권2호
• /
• pp.2-9
• /
• 1987

The Deterioration Factor (DF) for a single pollutant within an engine family is computed as the ratio of two points on a linear regression line describing durability vehicle test results as a function of accumulated mileage. It is inteded to represent the factor by which emissions will increase during the ''useful life" of a vehicle in the engine family. Here are discribed procedures for computing the DF and how consideration of the DF is included in the development for the motor vehicle emission certification process. This paper is aimed to develop the distribution of the DF for three pollutant and to estimate the parameter values for the distribution of the DF.

• 한국유기농업학회지
• /
• 제26권1호
• /
• pp.73-82
• /
• 2018

The alternative marketing can be defined a face to face regional marketing that commodities are traded based on mutual trust and understanding which have been accumulated through relationships formation and interaction between producers and consumers. Essences of an alternative marketing are formation, expansion and solidarity of relationships between producers and consumers, mutual trust and communication, and cooperation. Based on these, it makes it's principle to trade regionally and shorten food mileage and psycho-social distance. For example, there are local food direct stores, local food markets, farmer's markets, food package sales, CSA, local food school or public meal and so on. In alternative marketing, the relationship among them is especially considered very important in marketing process, not just a flow of commodities.

• 한국대기환경학회지
• /
• 제28권4호
• /
• pp.396-410
• /
• 2012

The purpose of this study is to quantify the contribution of high emitting vehicles to mobile emission inventories. Analyzed emission data include $NO_x$, HC, and CO results, which were measured through the vehicle Inspection and Maintenance (I/M) program in Seoul metropolitan area. The high emitting vehicles were identified as the top 5% worst polluting cars of the fleet. We estimated that 5% of the gasoline passenger car fleet, which is high emitters, generated 25.5% of $NO_x$, 34.5% of HC, and 66.1% of CO emissions of total inventories for gasoline passenger car fleet in year 2010. In the study, we identified that the older vehicles (older than ten years) and high mileage vehicles (more than 120,000 km driven) comprised high emitter fleet with 70.9% and 71.2%, respectively. The emission contribution of high emitters became larger in younger fleet than in the older fleet. This is due to the reduced emission rates in newly manufactured vehicles, which were developed under the more stringent emission regulation limits. This analysis implies that high emitters could be responsible for an even larger fraction of total vehicular emissions as more advanced technology vehicles are being incorporated into the current vehicle fleet. The findings suggested that the high emitting vehicles should be primarily considered for in-use vehicle emission management program, such as I/M, accelerated vehicle retirement, or catalytic converter replacement, in order to enhance the effectiveness of selected program.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.84-91
• /
• 2020

The APR1400 reactor stud holes can be stuck due to high temperatures, high pressure, prolonged engagement, and load changes according to pressure changes in the reactor. Threaded surfaces of a stud hole should be cleaned for the sealing of pressure in reactor vessel by removing any foreign materials which may exist in the stud holes. Human workers can access to the stud hole for the cleaning of stud holes manually, but the radiation exposure of human workers is increased. Robot is an effective way to work in hazardous area. So we introduced robot for the cleaning of stud holes. Localization of mobile robots is generally based on odometry, but with increased mileage, position errors can be accumulated. In order to eliminate cumulative error and to ensure stability of its driving, laser sensors and new control algorithm were utilized. The distance between the robot and the wall was measured by laser sensors, and the control algorithm was implemented so as to travel the desired trajectory by using the measured values from sensors. The performance of driving and hole sensing were verified through field application, and mobile robot was confirmed to be applicable to the APR 1400 NPP.