• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1048-1052
• /
• 2005

In Korean cases, the occupation of building construction is below 10% of the total industry workers but from a accident rate point of view, it is a risk serious industry and it's hazard is very considerable which accident rate is up to 30% of the total industry workers. The reason of high accident rate of the building construction is its own characteristic, hazard of the work in which is implicated and the shortage of safety counter plan and information, so it is most required to the building construction that educating, training, short and long period approaching to prevent the hazard. The safety information of building construction which is related to safety accident is divided into human and material such as hazard, work situation, cause and counter plan. The existing hazard cases imply all of the information about the work type and work progress of the building construction, so if the research of the every fact is well accomplished, we can obtain the useful information and prevent the hazard of building construction. From this point of view, the emphasis of this study is based on analyzing the cause of hazard first, suggesting the safety information each part of work type and work progress second, and finally making the all existing hazard cases to the Data Base and developing the safety information system.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.189-197
• /
• 2017

Background: Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. Methods: The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. Results: A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. Conclusion: A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.26-36
• /
• 2013

Highway traffic safety evaluation of area on the basis of the accident rate has a limitation, thus its result is dependent on the exposure variables. It works an obstacle to decision making for effective budget execution. In this paper, we developed a methodology of taking simultaneously macroscopic exposure indicators into account in evaluating the safety using least squares method. The weight of exposure indicators to make up of highway traffic safety evaluation index is that accident rate per population, accident rate per registration vehicle and accident rate per length of road is 0.29, 0.52 and 0.19 respectively and calculated the highway traffic safety index of total local governments in Korea. The methodology to calculate highway traffic safety evaluation index proposed in this paper can be utilized in executing the traffic safety policies to increase the efficiency of investment about traffic safety budget.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2021

Although the working environment has changed significantly compared to the past, such as the implementation of the five-day work week and the aging of the population, it is not reflected in the current industrial accident index calculation such as frequency rate, severity rate, and safe T-score. In this study, statistical data were used to understand time-series trends such as increase in life expectancy, working age, shortening of working hours, and average age of death by accident. As a result of time series trend analysis of statistical data, life expectancy increased to 83.3 years, and the legal working age was raised to 65 years due to the aging of the population. Also, with the advent of the 5-day work week since 2001, the average annual working hours decreased to 2008.1 hours. It can be confirmed through statistical data that these phenomena are applied to the current working environment due to a complex action, and these environmental changes affect the calculation results of the industrial accident index.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.103-111
• /
• 2011

The speed is one of the significant factors affecting accident occurrence. In particular, freeway accidents are highly associated with the speed because vehicles travel on the freeway at higher speed leading to greater potential of severer injury. Efforts attempting to relating speed with accident occurrence have not been significantly made in Korea. The objective of this study is to model the relationship between speed and accident rate on freeways. Loop detector data and accident data obtained from a stretch of Kyungboo freeway during the recent five years, 2005-2009, were used to establish the model. Multiple linear regression analyses showed that median, minimum and standard deviation of speed were contributing variables in the model. The statistical significance identified by the analyses supports the feasibility of the model in evaluating various transportation policies and operations strategies in terms of traffic safety.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.151-159
• /
• 2017

This study deals with characteristics and risk of a PM based on user survey result, road driving test and data analysis of PM accident. Text mining method is applied to extract PM accident data from Big Data, which are claim data of private insurance company. Road driving test and survey on safety, convenience, noise, overtake ability, steering ability, and climbing ability of PM are performed to evaluate user's safety and convenience considering domestic road condition. As the result of claim data analysis, annual average increase rate of PM accident is 47.4% and average compensation of personal mobility is higher than that of bicycle by maximum 1.5 times. 79.8% of PM accident is self-caused accident due to unskilled driving and age-specific diagnosis rate of driver over 60 is higher than that of under 60. Diagnosis rate of over 60 at lower limb, foot, rib and spine is especially higher than that of under 60. As the result of road driving test and user survey, satisfaction level on safety and convenience of PM is evaluated as close to that of bicycle and satisfaction level of PM is increased after boarding. Overtake ability, steering ability, and climbing ability of PM are evaluated as same or better than that of bicycle but warning equipment to pedestrian or bike such as horn is required because noise level of PM during driving is too low. Finally, user survey result shows that bicycle road is suitable for PM and safety standard, advance-education and insurance are required for PM. It is suggested that drivers' license for PM can be replaced by advance-education. Results of this study can be used to prepare safety measures and legal basis for PM operation.

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.2
• /
• pp.67-86
• /
• 2007

This study is about the drunken drivers' accident patterns and behavior and aims at providing basic data for developing measures to secure safety against accidents by drunken drivers and programs to cultivate good drinking habits. For this purpose, this study conducted a questionnaire of 800 persons over 20 years of age in the selected 20 companies with more than 30 employees in the 4 regions(Daegu, Masan, Changwon, and Jinhae) and analysed the 653 sheets except invalid ones among the returned 673 survey sheets in total(return rate 84.13%), and the researcher conducted a man-to-man interview with each subject from June 20th to July 31st 2006. The result are as the following. As the experience of causing an accident by drinking, the 79.1% of them had the experience, and in case of the subjects with excessive drinking over 4 times a year, the rate of the accident by drinking showed as high as 90.5%. As the patterns of accidents, in male subjects, violence(38.5%) and traffic accidents(37.1%) showed high, while in the female, hurts from falls and fall accidents(40.2%) were found be high. In case of the traffic accidents among the accidents by drinking, the rate of causing serious damage to the life was found to be 89.3%, so it showed that the traffic accidents caused by drinking were influencing on the life much. In conclusion, the drinking problem may be controlled by each individual's will, but without change of social environment and system around people, the problem can not be eradicated. Therefore there should be social infrastructure which can help people to actively live their life with exercises and hobbies, and in order to prevent the reoccurrence of a drink accident, and social structure in which there are education programs for drink accident causers and one can change the perception about drinking culture, should be formed.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.184-193
• /
• 2021

Background: The radionuclides released by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident 9 years ago are still being monitored by various research teams and the Japanese government. Comparison of different surveys' results could help evaluate the exposure doses and the mechanism of radiocesium behavior in the urban environment in the area. In this study, we clarified the relationship between land use and temporal changes in the ambient dose rates (air dose rates) using big data. Materials and Methods: We set a series of 1 × 1 km² meshes within the 80 km zone of the FDNPP to compare the different survey results. We then prepared an analysis dataset from all survey meshes to analyze the temporal change in the air dose rate. The selected meshes included data from all survey types (airborne, fixed point, backpack, and carborne) obtained through the all-time survey campaigns. Results and Discussion: The characteristics of each survey's results were then evaluated using this dataset, as they depended on the measurement object. The dataset analysis revealed that, for example, the results of the carborne survey were smaller than those of the other surveys because the field of view of the carborne survey was limited to paved roads. The location factor of different land uses was also evaluated considering the characteristics of the four survey methods. Nine years after the FDNPP accident, the location factor ranged from 0.26 to 0.49, while the half-life of the air dose rate ranged from 1.2 to 1.6. Conclusion: We found that the decreasing trend in the air dose rate of the FDNPP accident was similar to the results obtained after the Chernobyl accident. These parameters will be useful for the prediction of the future exposure dose at the post-accident.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.307-320
• /
• 2017

The objective of this study is to identify the effectiveness of ESC(Electronic Stability Control) based on a meta analysis technique. Accident Rate, Fatal Crash Rate, Loss of Control Crash Rate were set as indexes of traffic safety evaluation. Also, reviews on the effectiveness of ESC were collected using keyword, 'ESC'. As a result, the Effect size of accident rate odd ratio was 0.90. When ESC system was applied on vehicles, accident rate decreased by 10%. Also, the Effect size of fatal crash rate odd ratio was 0.64. When ESC system was applied on vehicles, fatal crash rate decreased by 36%. Lastly, the Effect size of loss of control crash rate odd ratio was 0.73. When ESC system was applied on vehicles, loss of control crash rate decreased by 27%. The outcome of this study would be effectively used for developing polices and regulations for ESC installation obligation of commercial vehicles.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.95-102
• /
• 2012

This study has been conducted to characterize the relations between the accident rate and the overlap section elements where the horizontal alignment and vertical alignment are overlapped. The researches were performed on Horizontal curve sections of 4-lane highways with 100km/h of design speed and speed limit. Korea Highway Corporation's Geographic Figurative Information System was adopted for geometric organization and Highway Traffic Accident Statistics was used. The results reveal that sections made of a single slope without vertical curve has greater accident rate than those with vertical curve, and that sections with 1 vertical curve are higher in the accident rate than those with over 2 vertical curve. For the sections with 1 vertical curve, SAG sections are higher than CREST sections and for the previous straight section of horizontal curve are higher than curved ones. In particular, when the road surface is wet, the accident rate is closely related with SAG vertical curves or leftward horizontal curved sections. This study will have meanings that it proposes the importance of design of road alignment by taking consideration of 3D synthetic alignment conditions for improvement of the road safety.