• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.171-179
• /
• 2004

Today, the number of vehicle increased rapidly with the development of modem science technology, and it caused serious problems; traffic jam, accident and pollution etc. One of the solve methods these problems it is necessary to develope the vehicle navigation systems and it is already widely used to in field of military etc. Vehicle navigation system can increase the efficiency of traffic flow and offer at a drivers at a best driving conditions. In the vehicle navigation, most important thing is to measure of correct position. There are classifiable as three types. The first is G.P.S., method at artificial satellites which measures the present position and velocity any time, any where in the world at the same time. Secondly, a vehicle can determine its position and path information with a gyroscope and odometer signal, which is called Dead-Reckoning method. Thirdly, hybrid navigation system is the combined of two methods to make utilize the advantage of each navigation system. In the paper, we are analyzed to characteristics at a gyro sensor and introduce at a composition of hybrid navigation system which is combined with the G.P.S., D.R., and map-matching technique. We analyze deeply for the Map-Matching method and explain the coordinate transformation for G.P.S., and the Hybrid navigation algorithm is developed and experimented. Finally, we conclude and comment about our road test results.

• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.263-272
• /
• 1997

A Radiation Alarm Monitor has been developed and manufactured in order to protect radiation workers from over-exposure. A visual and audible alarm system has been attached to initiate evacuation when accident occurs such as an unexpected change of radiation level or an over-exposure. The Radiation Alarm Monitor installed with microprocessor can record the information of radiation field change between 90 min. before the alarm and 30 min. after the alarm and also provide the data to an IBM compatible computer to analyze the accidents and to set a counterplan. It features a wide detection range of radiation field(10 mR/h-100 R/h), radiation field data storage, portability, high precision (${\pm}5%$) due to self-calibration function, and adaption of a powerful alarm system. According to ANSI N42.17A, the most stringent test standards, performance tests were carried out under various conditions of temperature, humidity, vibration, and electromagnetic wave hindrance at Korea Research Institute of Standards & Science (KRISS). As a result, the Radiation Alarm Monitor passed all tests.

• Safety and Health at Work
• /
• v.3 no.4
• /
• pp.278-286
• /
• 2012

Objectives: Authors investigated the pattern of the rate of occupational injuries and illnesses (ROII) at the level of enterprises in order to build a network for exchange of experience and knowledge, which would contribute to workers' safety and health through safety climate of workplace. Methods: Occupational accidents were analyzed at the manufacturing work site unit. A two step clustering process for the past patterns regarding the ROII from 2001 to 2009 was investigated. The ROII patterns were categorized based on regression analysis and the patterns were further divided according to the subtle changes with Mahalanobis distance and Ward's linkage. Results: The first clustering of ROII through regression analysis showed 5 different functions; 29 work sites of the linear function, 50 sites of the quadratic function, 95 sites of the logarithm function, 62 sites of the exponential function, and 54 sites of the sine function. Fourteen clusters were created in the second clustering. There were 3 clusters in each function categorized in the first clustering except for sine function. Each cluster consisted of the work sites with similar ROII patterns, which had unique characteristics. Conclusion: The five different patterns of ROII suggest that tailored management activities should be applied to every work site. Based on these differences, the authors selected exemplary work sites and built a network to help the work sites to share information on safety climate and accident prevention measures. The causes of different patterns of ROII, building network and evaluation of this management model should be evaluated as future researches.

• Safety and Health at Work
• /
• v.4 no.3
• /
• pp.160-165
• /
• 2013

Background: Occupational accidents are unplanned events that cause damage. The socio-economic impacts and human costs of accidents are tremendous around the world. Many fatalities happen every year in workplaces such as electricity distribution companies. Some electrical injuries are electrocution, electric shock, and burns. This study was conducted in an electricity distribution company (with rotational 12-hour shift work) in Iran during an 8-year period to survey descriptive factors of injuries. Methods: Variables collected included accident time, age of injured worker, employment type, work experience, injury cause, educational background, and other information about accidents. Results: Results indicated that most of the accidents occurred in summer, and 51.3% were during shift work. Worker negligence (malpractice) was the cause of 75% of deaths. Type of employment had a significant relationship with type of injuries (p < 0.05). Most injuries were electrical burns. Conclusion: High rate of accidents in summer may be due to the warm weather or insufficient professional skills in seasonal workers. Shift workers are at risk of sleep complaints leading to a high rate of work injuries. Acquiring knowledge about safety was related to job experiences. Temporary workers have no chance to work all year like permanent workers, therefore impressive experiences may be less in them. Because the lack of protective equipment and negligence are main causes of accidents, periodical inspections in workshops are necessary.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.769-775
• /
• 2017

The International Maritime Organization's e-Navigation strategy is to introduce new technologies to ships to support easier and safer navigation. With the e-Navigation strategy, various equipment will be installed in vessels and the system structure will be linked to onshore systems. For this reason, a common data structure between systems became necessary, and finally the S-100 standard developed by the International Hydrographic Organization was selected. This paper describes a design of marine casualty data model based on the S-100 standard. The data model of the S-100 standard is designed in the form of a UML class diagram, and the final encoding follows the GML / XML format. We will look at the S-100 standard and product specifications under development, and describe the S-100 standards-based data design and portrayal definition of marine accident data.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.557-568
• /
• 2014

This paper presents the results of an analysis of wind characteristics and atmosphere dispersion modeling that are based on computational simulation and part of a preliminary study evaluating environmental radiation monitoring system (ERMS) positions within the Barakah nuclear power plant (BNPP). The return period of extreme wind speed was estimated using the Weibull distribution over the life time of the BNPP. In the annual meteorological modeling, the winds from the north and west accounted for more than 90 % of the wind directions. Seasonal effects were not represented. However, a discrepancy in the tendency between daytime and nighttime was observed. Six variations of cesium-137 ($^{137}Cs$) dispersion test were simulated under severe accident condition. The $^{137}Cs$ dispersion was strongly influenced by the direction and speed of the main wind. A virtual receptor was set and calculated for observation of the $^{137}Cs$ movement and accumulation. The results of the surface roughness effect demonstrated that the deposition of $^{137}Cs$ was affected by surface condition. The results of these studies offer useful information for developing environmental radiation monitoring systems (ERMSs) for the BNPP and can be used to assess the environmental effects of new nuclear power plant.

• Korean Journal of Veterinary Research
• /
• v.44 no.3
• /
• pp.373-378
• /
• 2004

To help the interpretation of causes of death, it is critical that the background incidence of factors contributing to death be recorded and archived. Information was gathered from the control groups of 19 rat carcinogenicity studies. All cases of death occurring within the 2-year period were reviewed. Out of 1124 males and 1084 females, 720 male (64.1%) and 689 female (63.6%) decedents were recorded. There was no difference in the probability of survival between two sexes. Analysis of factors contributing to death revealed that 400 males (48.7%) had neoplastic changes, 189 males (23.0%) had non-neoplastic lesions, and 232 males (28.3%) died from unknown causes. In females, these figures were 627 (76.4%), 62 (7.6%) and 132 (16.0%), for neoplastic, non-neoplastic and unknown findings, respectively. It could be suggested that the risk of death by non-neoplastic reasons was higher in the males than in the females, whereas females were more likely to be affected by tumours. In the neoplastic causes of death, pituitary tumours were the most common in both sexes, followed by mammary tumours in females, and haemopoietic tumours in males. In non-neoplastic cause of death, renal diseases were the most common in both sexes, followed by skin diseases and cardiovascular diseases in males, and skin diseases and poditis in males. A relatively large number of animals (28.3% in males and 16.0% in females) were found dead, without any significant clinical or histologically identifiable cause. Most of the animals with pituitary tumours were killed in extremis and the proportion of females (70.1%) being greater than males (46.8%). There were no case which died by accident, and also only minimal incidence which died by bleeding procedures.

• Fire Science and Engineering
• /
• v.28 no.2
• /
• pp.91-97
• /
• 2014

New types of fire accidents appear or the existing types disappeared because of rapidly changing society. We proposed a methodology of extracting new nouns from fire investigation data each of which is an accident report producted by fire investigators. The new nouns could be used in modifying the existing categories for classifying fire accidents. We analysed morphology of the product names and the ignition summaries using the proposed method for the fire accidents classified as the etc sub-category of the category of equipments involved in ignition. In this paper, we found "dryer" as a new sub-category of the agricultural equipment category and "boiler" in the seasonal appliance category from the product names of the fire accidents. We also extracted the new input keywords of "aquarium" and "monitor" in the commercial facilities category and the video, audio apparatus category from the ignition summaries respectively. Using the four subcategories, we reclassified 548 (14.39%) of 3,808 fire accidents assigned to the etc sub-category.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.729-732
• /
• 2008

Complexity and Massive is the modem trend of construction project. The lack of timely and accurate construction data is the main cause for the lack productivity increases seen in other industries. Because information is essential in the construction production process, the lack of it will cause workers to stay idle, build the wrong thing that has to be redone, become involved in an accident or simply waste their time doing non-productive work. To aid construction automation and improve its productivity, RFID technology system should be developed. As a result of that, this study analyzes the status of RFID technologies in construction project and suggest advanced construction method. USN and RTLS system is analyzed in this study RFID system also can be used in construction management, material management, quality control, safety management and human resource management.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.18-27
• /
• 2019

Through the technology of the 4th industrial revolution, agricultural machinery is becoming increasingly intelligent, and the machine is replacing the role of farmer manpower as a whole. However, safety accidents caused by careless use of agricultural machines and theft accidents due to the difficulty of keeping them are increasing every year. Because agricultural machines do not manage the history of events and accidents unlike automobiles, they are often used for crime. There is also no way to cope with the issues if there happens issues on agricultural machines. In this paper, we propose the system based on block chain which can manage the history of the agricultural machinery by registering the chassis number at the same time when purchasing the agricultural machinery. Since this system contains the history of accident and repair information about the owner's agricultural machinery, it is possible to trace back even if a theft occurs. The proposed system also allows buyers to secure transactions by providing reliable data through inquiry of this system when trading in the secondary market in the future.