• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1297-1308
• /
• 2015

In Korea, the local traffic safety master plan has been established and implemented according to the Traffic Safety Act. Each local government is required to establish a customized traffic safety policy and share roles for improvement of traffic safety and this means that local governments lead and promote effective local traffic safety policies fit for local circumstances in substance. For implementing efficient traffic safety policies, which accord with many-sided characteristics of local governments, the prediction of community-based traffic accidents, which considers local characteristics and the analysis of accident influence factors must be preceded, but there is a shortage of research on this. Most of existing studies on the community-based traffic accident prediction used social and economic variables related to accident exposure environments in countries or cities due to the limit of collected data. For this reason, there was a limit in applying the developed models to the actual reduction of traffic accidents. Thus, this study developed a local traffic accident prediction model, based on smaller regional units, administrative districts, which were not omitted in existing studies and suggested a method to reflect traffic safety facility and policy variables that traffic safety policy makers can control, in addition to social and economic variables related to accident exposure environments, in the model and apply them to the development of local traffic safety policies. The model development result showed that in terms of accident exposure environments, road extension, gross floor area of buildings, the ratio of bus lane installation and the number of crossroads and crosswalks had a positive relation with accidents and the ratio of crosswalk sign installation, the number of speed bumps and the results of clampdown by police force had a negative relation with accidents.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.67-89
• /
• 2013

This study is to perform empirical analysis on observational before-after studies in Naive Method, Comparison Group(CG) Method and Empirical Bayes(EB) Method, and to compare with their results and to propose ways to apply to evaluation researches. For this purpose, the evaluation of road safety audit executed on Y$\breve{o}$ng-dong freeway in 2005 and 2006 was performed. As a result, all three methods have showed improved effects due to safety treatments. The safety effectiveness of Naive method is the largest, CG Method is the second and EB method is the last. The results of Naive method are overestimated due to the trend of reducing traffic accidents and those of CG method are affected by the external casual effects of comparison group. In the EB method, as "regression to the mean" phenomenon are controlled by reference group's accident model, it's result is relatively more accurate than that of other methods. In the conduct of evaluation studies, the analysts have to understand the pros and cons of each evaluation method. And after leading the survey on accident trends of related all sites, evaluation analysis is performed to be able to minimize bias.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.169-179
• /
• 2018

The Korean society has become increasingly concerned about the safety consciousness because of the Sewol Ferry disaster in April 2014. This shows the absence of social system and safety consciousness of Korean society that has been rapidly growing through fast industrialization. The purpose of this paper is to suggest guidelines for the production of a safety animation by approaching the discourse of public value. For this research process, first, literature review will be conducted by focusing on the safety culture, causes of safety accidents, safety education and educational effect using animation. Second, I will analyze 11 safety animation films by focusing on (1) construction of accident environment(narrative, character and background design) (2) exploration of dangerous elements and accident happening(accident type and dangerous elements, method of direction for accident happening, damage degree) (3) the guideline for safety behaviour. Third, guidelines for the production of safety animation will be suggested by analyzing the results of literature reviews and case studies in a comprehensive way. It is expected that this paper will be used as a basic data for academic research and animation production related to the safety accident.

• Nuclear Engineering and Technology
• /
• v.16 no.3
• /
• pp.141-154
• /
• 1984

An analysis is presented of key phenomena and scenario which imply some general trends for beyond design-basis-accident in Kori-1 PWR dry containment. The study covers a wide range of severe accident sequences initiated by small break LOCA. The MARCH computer code, with KAERI modifications was used in this analysis. The major emphasis of the paper are two folds, 1) the phenomenologic understanding of severe accident and 2) a study of H2 combustion and debris/ water interactions in a specific small break LOCA for Kori-1 plant. The sensitivity studies for the specific plant data and thermal interaction modelings used in the SASA were performed. The results show that if hydrogen burning does occur at low concentration, the resulting peak pressure does not exceed the design value, while the lower concentration assumption results in repeated burning due to the continuing H$_2$ generation. For debris/water interaction, the particle size has no effect on the magnitude of peak pressure for the amount of water assumed to be in the reactor cavity. But, the occurrence of peak pressure is considerably delayed in case of using the dryout correlation. The peak containment pressure predicted from the hydrogen combustion and steam pressure spite during full core meltdown scenario does not present a severe threat to the containment integrity.

• International Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.63-72
• /
• 2005

This paper considered the impact of changing the product liability rule from consumer to producer liability on product safety under asymmetric information. In particular, it has been attempted to remove several constraints on antecedent studies. The main results of the study are as follows: under the misperception of the risk on a product, consumers may underestimate the probability of product failure. In this case, the accident rate can be lowered under the producer's liability rule. However, even under the asymmetric information, a consumer's estimation on the probability may be converged with the expected risk level, which could be called the 'rational expectation.' In this situation the probability of product failure can be lowered under the strict liability with contributory negligence. Additionally, it is possible to reduce the probability of product failure when a legal rule that imposes liability on cheapest cost avoider is admitted.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.214-219
• /
• 1997

In spite of many accidents still occur repeatedly. The reason why we have so many accidents in industrial plants is mainly due to lack of effective safety education. Most safety education committed by safety staff is composed of general education and/or accident case studies. However, it is quite natural that the safety education should be more task- specific rather than general, if it be effective. Thus for preventing gas leakage accidents during changing explosive gas cylinders, this study aimed to analyze a manual chaning work in semiconductor plants, and to deaw importamt educational points. With the help of HRA and ETA, the most important task truned out to be reconfirmation of regulator gauges. Under the assump- tion of independent events, the estimated leakage probability was 23004E-05 which seriously understimated the probability, 8.1008E-05 under the assumption of dependent events. And the most probable situation would be gas leakge from the used gas cylinder. It was made clear that the assumption of independence could distrot safety educational focus.

• Wind and Structures
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2011

This study presents a decision making process for installation of wind barrier which is used to reduce the wind speed applied to running vehicles on expressway. To determine whether it is needed to install wind barrier or not, cost and benefit from wind barrier are calculated during lifetime. In obtaining car accidental risk, probabilistic distribution of wind speed, daily traffic volume, mixture ratio in the volume, and duration time for wind speed range are considered. It is recommended to install wind barrier if benefit from the barrier installation exceed construction cost. In the numerical examples, case studies were shown for risk and benefit calculation and main risky regions on Korean highway were all evaluated to identify the number of installation sites.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.233-234
• /
• 2022

In order to minimize casualties in case of a fire in a building, it is necessary to anticipate the time required for evacuation of occupants and the delay in evacuation in advance, and prepare countermeasures for possible occurrences. In fact, various factors that cannot be predicted exist and cannot be considered by excluding them, so the risk is predicted and evaluated through quantitative evacuation modeling. In order to understand this, we analyzed domestic and international evacuation modeling research trends. For about 40 years, starting with the characteristics of human movement, an evacuation modeling technique based on scientific methods has been developed through actual fire accident cases and various real-world experiments with humans. Then, in order to analyze the natural reaction of humans, which has a decisive influence in the recognition and decision-making phase, evacuation modelling studies have been conducted in depth using psychological and physical experimental methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.119-120
• /
• 2023

This paper investigates the applicability of movable sensors that can be attached to hard hats to protect construction site safety management to prevent safety accidents based on accident case studies in the field of construction engineering and the gas sensors currently used in construction sites. We would like to propose MQ-2, a standard Arduino gas sensor.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.2
• /
• pp.74-81
• /
• 2017

An off-site consequence analysis is used to calculate the risks when hazardous chemicals that is being used on-site has been exposed off-site; the biggest factor that impacts the risk is the risks of accident scenarios. This study seeks to calculate risks according to accident scenarios by applying OGP/LOPA risk calculating methods for similar facilities, calculate risk reduction ratio by inspecting applicable IPL for incidents, and propose an appropriate risk standard for different risk calculating methods. Considering all applicable IPL when estimating the safety improvement of accident scenarios, the risk of OGP is 8.05E-04 and the risk of LOPA is 1.00E-04, According to the case of IPL, the risk is 1.34E-02. The optimal risk level for accident scenarios using LOPA was $10^{-2}$, but the appropriate risk criteria for accident scenarios in foreign similar studies were $10^{-3}{\sim}10^{-4}$, the risk of a scenario can be determined at an unacceptable level. When OGP is applied, it is analyzed as acceptable level, but in case of applying LOPA, all applicable IPL should be applied in order to satisfy the acceptable risk level. Compared to OGP, the risk is high when LOPA is applied. Therefore, the acceptable risk level should be set differently for each risk method.