• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.827-835
• /
• 2017

With the rapid progress of ageing several issues concurrently occur, and one important social issue that must be resolved is accidents involving Elderly drivers. Efforts to reduce the frequency of such accidents is a must in order to be prepared to face a superaged society. Currently people aged 65 or older are prescribed as an "Elderly person." Therefore, various studies concerning accidents involving Elderly drivers apply this age criteria to separate regular drivers and Elderly drivers. However, there is no criteria to practically discern Elderly drivers with certain physical features as vulnerable road users based on a level of acceptable accuracy. Therefore, this studies intends to compare the possibility of accidents by age group of Elderly drivers by correlation analysis to analyze the accident characteristics by age group. Results showed that for drivers aged 75 and older, their influence on major accident characteristics by vehicle type increased with higher age groups. In particular, passenger cars had a relatively low accident frequency rate for drivers aged between 70 and 80, but for drivers aged 75 to 84, they had higher influence on accidents for the same vehicle type. This demonstrates that as ageing progresses and the average life expectancy increases, the age span of elders continues to increase, meaning that characteristics differ by age group among the aged. This study confirmed that the influence on the possibility of accidents differs by age group among the aged.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.3-9
• /
• 2015

Since changes in land use in urban space cause traffic volume and it is closely related to traffic accidents. Therefore, an analysis on the causes of traffic accidents is judged to be an essential factor to establish the measure to reduce traffic accidents. In this regard, the analysis was conducted on the clustering by using the nearest neighbor indexes with regard to the occurrence frequencies of commercial and residential zone based on traffic accident data of the past five years (2009-2013) with the target of local small-medium sized city, Jinju-si. The analysis results, obtained in this study, are as follows: the occurrence frequency of traffic accidents was the highest in spring and the lowest in winter respectively. The clustering of traffic accident occurrence at nighttime was stronger than at daytime. In addition, terms of the analysis on the clustering of traffic accident according to land use, changes according to the seasons was not significant in commercial areas, while clustering density in winter tended to become significantly lower in residential areas. The analysis results of traffic accident types showed that the side-right angle collision of cars was the highest in frequency occurrence, and widespread in both commercial areas and residential areas. These results can provide us with important information to identify the occurrence pattern of traffic accidents in the structure of urban space, and it is expected that they will be appropriately utilized to establish measures to reduce traffic accidents.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.357-359
• /
• 2006

The electric power system of Kwangyang steel works needs to keep the parallel operation with the system of KOPEC(Korea Electric Power Corporation) for supplying the power with safety. Once it is separated from KOPEC due to an accident, it operates the automatic Mill trip system to prevent huge fluctuating loads from the serious frequency drop. In spite of that, it is recent situations that the continuous growth of electric loads facilitates the frequency drop. Therefore, this paper proposes a model of generator control system so as to quantitatively analyze the response characteristics to the frequency change under the single operation, and also suggests the strategy for minimizing the frequency changes. The simulation results show it is desirable to operate the generators by 3% speed droop and 10% load limiter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.300-305
• /
• 2013

LOOP(Loss of Offsite Power) and SBO(Station Blackout) events have been occurring in nuclear power plants should be reviewed and be controlled on important electrical equipments by professional engineer to prevent and to safety improvement from safety assessment and reliability analysis report. LOOP and SBO occasionally happened by internal or external causes. This paper contained that LOOP frequency in the United States NPPs and in the domestic NPPs have compared and analyzed data by the past lessons and probabilistic statistics. Additionally will be installed MG(Mobile Generator) according to the lessons of Fukushima nuclear accident in Japan, which CDF(Core Damage Frequency) and LOOP frequency have reconsidered. And this paper proposed to reduce reliability criteria using PSA(Probabilistic Safety Analysis).

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.38-40
• /
• 2002

In the case of conventional high frequency inverter, with damage of switch by surge voltage when switch gets into compulsion extinction by load accident and so on because reactor is connected by series to switch, or there was problem of conduction loss by reactor's resistivity component, Also, it has controversial point of that can not ignore conduction loss of switch in complete work kind action of soft switching. In this paper, as high frequency induction heating power supply, we propose half bridge type multi resonance soft switching high frequency inverter topology that can realize high amplitude operation of load current with controlling switch current by multiplex resonance, mitigating surge voltage when switch gets into compulsion extinction and to be complete operation of zero current switching by opposit parallel connected reactor to inverter switch. and do circuit analysis for choice of most suitable circuit parameter of circuit

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.153-156
• /
• 2000

To reduce the maintenance expense, and the possibility of electric outage and accident, we should optimize the outdoor insulation system. And for the optimization, accurate measurement for the degree of contamination with climatic conditions, such as wind, rain, and drought, should be carried. However the classical measuring method, brush wiping, has some problems in the aspect of man power, reliability, and expense. In this paper, we propose two type apparatus, which could detect the degree of contamination on insulators in outdoor insulation system, such as transmission and distribution line insulator and bushing. One use the leakage current, and the other use the oscillating frequency to check the degree of contamination. To avoid the oxidation of electrode AC source, and the low degree of contamination was applied. From the result of this investigation we could get the good relationship between the degree of contamination and the leakage current and oscillating frequency

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.1-10
• /
• 2021

Semiconductor Photo Resist (PR) automation equipment uses a mixture of several flammable substances, and when it leaks during the process, it can lead to various accidents, therefore, risk assessment is necessary. This study analyzed the frequency of leakage of Acetone and PGMEA used in PR automation equipment and the frequency at which such leakage could lead to a fire accident through the frequency analysis method, and evaluated the need for additional risk reduction measures in the current facility. Based on the process leak data and ignition probability data of IOGP, leak frequency analysis and ignition probability were derived, and the frequency of actual fire accidents was analyzed by combining them. The frequency of material leakage in semiconductor PR process is 7.30E-03/year, and fire accidents can occur by acetone that exists above the flash point when the material is leaked, the frequency was calculated at the level of 1.24E-05/year. According to the UK HSE, for a major accident occurring with a frequency of 1.24E-05/year, it is defined as "Broadly Acceptable", a level that does not require additional measures for risk reduction when it causes 7 or less deaths, and due to the process operated by two people, no additional risk reduction are required.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.54-63
• /
• 2014

Traffic accident frequency and severity level in Korea are known to be very serious. Especially the number of pedestrian fatalities was much worse and 1.6 time higher than the OECD average. According to the National Police Agency, the flash signals are reported to have many safety benefits as well as travel time reduction, which is opposed to the foreign studies. With this background of expanding the flash signal, this research aims to investigate the overall impact of the flash signal operation on safety, investigating and comparing the accident occurrence on the flash signal and the full signal intersections. For doing this accident prediction models for both flash and full signal intersections were estimated using independent variables (geometric features and traffic volume) and 3-year (2011-2013) accident data collected in Seoul. Considering the rare and random nature of accident occurrence and overdispersion (variance > mean) of the data, the negative binomial regression model was applied. As a result, installing wider crosswalk and increasing the number of pedestrian push buttons seemed to increase the safety of the flash signal intersections. In addition, the result showed that the average accident occurrence at the flash signal intersections was higher than at the full signal-operated intersections, 9% higher with everything else the same.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.131-143
• /
• 2012

The past researches on roadway segment safety estimation focused on intersections, which are the primary traffic accident regions. The past researches on roadway segments, However, analyzed the effects of certain factors on the traffic accident occurrence rate by organizing the individual geometric structures of the roads, and there is still a dearth of researches on the development of a traffic accident estimation model for rural roadway segments. Therefore, this research focused on rural two-lane and multilane roadway segments and developed traffic accident estimation models through the application of statistical techniques. This is required to explain such high frequency of zero counts in the traffic accident data. In this research, it was found that the Hurdle model is more suitable than the Poisson or negative binomial-regression model for explaining the excess zeros case. In addition, main variables were chosen to estimate their effects on traffic accident occurrence at rural roadway segments, and the safety at such rural roadway segments was estimated. In this research, it was assumed that there are different factors that affect the safety at two-way lane and multilane roadway segments, and a traffic accident estimation model was developed by dividing the two-way lane and multilane roadway segments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.423-432
• /
• 2019

Along with an increase in marine activities every year, the frequency of marine accidents is on the rise. Accordingly, various research activities and policies for marine safety are being implemented. Despite these efforts, the number of accidents are increasing every year, bringing their effectiveness into question. Preliminary studies relying on annual statistical reports provide precautionary measures for items that stand out significantly, through the comparison of statistical provision items. Since the 2000s, large-scale marine accidents have repeatedly occurred, and case studies have examined the "accident response." Likewise, annual statistics or accident cases are used as core data in policy formulation for domestic maritime safety. However, they are just a summary of post-accident results. In this study, limitations of current marine research and policy are evaluated through a literature review of case studies and analyses of marine accidents. In addition, the ontology of the marine accident information classification system will be revised to improve the current limited usage of the information through an attribute analysis of boating accident status reports and text mining. These aspects consist of the reporter, the report method, the rescue organization, corrective measures, vulnerability of response, payloads, cause of oil spill, damage pattern, and the result of an accident response. These can be used consistently in the future as classified standard terms to collect and utilize information more efficiently. Moreover, the research proposes a data collection and quality assurance method for the practical use of ontology. A clear understanding of the problems presently faced in marine safety will allow "suf icient quality information" to be leveraged for the purpose of conducting various researches and realizing effective policies.