• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.389-401
• /
• 2016

This study attempted to present the monthly distribution of the inshore gill netters for the prevention of propeller failure caused by the damage of fishing gear by the merchant vessels in the West Sea. This study was conducted using the transmitting device of fishing location (V-Pass) data for 1 year in 2014. The grid intervals are $30minute{\times}30minute$ ($latitude{\times}longitude$) based on the section of the sea. A total of 56 sections were analyzed by constructing a grid. The results revealed that the section no. 194 with the highest density index showed no fishing gear damage accident. But the section no. 193 with a relatively lower density index showed more frequent fishing gear damage accident. It is because the section no. 193 is included in the main route of the merchant vessels. Based on this analysis, it is found that the fishing gears are not damaged in proportion to density index but risk of damage exists according to the main routes of merchant vessels. Therefore, for the safe navigation of the merchant vessels, notifying the waters of $34.5^{\circ}{\sim}35.5^{\circ}$ at latitude and $125.67^{\circ}{\sim}126^{\circ}$ at longitude, as a navigational warning area from May through September, will prevent marine accident, such as propeller failure and fishing gear damage. Accordingly, when the merchant vessels navigate in the section no. 193 and 203, the area of $34.5^{\circ}{\sim}35.5^{\circ}$ at latitude and $125.5^{\circ}{\sim}125.67^{\circ}$ at longitude is recommended for the safe navigation.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.498-506
• /
• 2010

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.139-149
• /
• 1999

Developed in this paper is a prototype extranet using mobile device such as Personal Digital Assistance(PDA) or Handheld PC(HPC). Especially an adjustment transaction system for auto insurance using wireless data communications is described. Using infrastructures such as PCS, Cellular, Private Radio, wireless communications offers tremendous applications in Korea. A survey of such applications is presented in this paper. Also an analysis of currently available infrastructures of wireless communications is described in this paper. The scheme of an adjustment transaction consists of seven steps: (1) get list of adjustment, (2) obtain insurance information, (3) check police record, (4) get an accident record, (5) get bluebook value, (6) examine the car, (7) file report. Comparing with the previous on-line method that spends much time on gathering data, the proposed system guarantees more rapid transaction using wireless communications.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.31-41
• /
• 2012

This study collected 5,100 cases of gas accident occurred in Korea for 14 years from 1995 to 2008, established Database and based on it, analyzed them by detailed forms and reasons. As the result of analyzing the whole city gas accidents with Poisson analysis, the item of "Careless work-Explosion-Pipeline' showed the highest rate of accidents for the next 5 years. And, "Joint Losening and corrosion-Release-Pipeline" showed the lowest rate of accident. In addition, for the result of analyzing only accidents related to LPG vaporizer, "LPG-Vaporizer-Fire" showed the highest rate of accident and "LPG-Vaporizer-Products Faults" showed the lowest rate of accident. Also, as the result of comparing and analyzing foreign LPG accident accompanied by Jet fire, facility's defect which is liquid outflow cut-off device and heat exchanger's defect were analyzed as the main reason causing jet fire, like the case of Korea, but the number of accidents for the next 5 years was the highest in "LPG-Mechanical-Jet fire" and "LPG-Mechanical-Vapor Cloud" showed the highest rate of accidents. By grafting Poisson distribution theory onto gas accident expecting program of the future, it's expected to suggest consistent standard and be used as the scale which can be used in actual field.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.717-723
• /
• 2011

When the Balise(the device to transmit information between the on-board equipment and the wayside equipment) failure occurs, it may not be able to transmit data(Telegram) required for the train running. And in some cases, it may be able to cause an accident. Therefore, both the Balise failure affecting train safety running and the hazard in accordance with Balise failure require some activities to establish them. General failure mode & hazard analysis associated with the Balise are described in UNISIG SUBSET-036 spec & UNISIG SUBSET-088 spec. And, with reference to these specifications, safety activities are being performed. In recent domestic railway, the train control system applying ETCS(European Train Control System) Level 1, 2 is being serviced and is being planned, and as part of this system, the Balise is being applied. The design-method of the Balise device for each manufacturer are different, therefore the Balise failure mode & failure rate are different, either. But the functionalities & transmission-data format(Telegram) of the Balise in ETCS Level 1, 2 application for each manufacturer are identical. Accordingly, the hazard caused by function-fail can be identical, either. In order to establish these hazard, in this paper, we analyzed the detailed functions of the Balise. And we analyzed the Balise failure types & failure effects in accordance with the detailed functions.

• The Korean Journal of Health Service Management
• /
• v.10 no.3
• /
• pp.223-234
• /
• 2016

Objectives : The purpose of this study was to investigate accident cases involving electronic assistive devices, to determine how these accidents can be avoided and to devise preventative instructions for the handicapped who use these devices. Methods : This study was carried out from July 20 to October 3, 2015. A consent-based survey was conducted via mail and mobile phones targeting 700 electronic assistive device users, of which questionnaires from 290 users were collected and used in the analysis. Results : Accidents involving electronic assistive devices were investigated, especially the causes of the accidents and accident prevention education, as well as the status of the electronic assistive devices. The most common accident types were collision and falling, and it was found that the victims of the accidents usually suffered severe injury to their lower limbs. Most users used electronic assistive devices every day but rarely wore a safety belt because of discomfort. There were more incidents of collision and falling for older aged handicapped users, and the injury rate to the lower limbs was highest in handicapped elderly aged 50 years or older. Conclusions : In order to prevent accidents with electronic assistive devices in the future, a or management organizations must prepare specific safety guidelines and manage these accidents.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.331-335
• /
• 2016

When a boating accident, such as a January number three, the customer's risk management issues emerged. Ships and accident risk in confined spaces such as risk management to locate the customer and dangers of probation is available. In this paper, aboard after consent to obtain information for customers to wrist to customers, webbing or portable device embedded in devices and Wireless sensor information Input was attached, disposable consumer information. Customer on board the ship setting for location analysis and positioning according to information communication protocol, ships, each customer's real-time location information on the screen, 3 the foundation of d customers on the floor Can be designed to inform. Threshold designed to reduce the error of the information to analyze the position in current position and errors. Also, to system attacks would control the situation of accident and emergency jaenanguk server with real-time information transmission of information outside the emergency during a disaster, search and Disaster relief to be possible.

• Journal of the Korean Society of Safety
• /
• v.29 no.2
• /
• pp.7-11
• /
• 2014

The electric shock victims were predominantly male, and more than half of the victims were found in companies with less than five employees in terms of the scale of company, and also more than half of victims had less than one month of experience for work experience. Considering the category of industry, more than half of the victims were engaged in construction, and considering the subcategory of industries, more than 60% of electric shock victims were found in building and other construction works. This study intended to conduct an in-depth analysis on the cause of electric shock accidents to provide basic data for policy proposing taking into considering the characteristics such as the electric shock path, low voltage, grounding and protection of workers. Also this study conducted an in-depth analysis of electric shock accidents for the past eleven years taking into account the necessity of a long-term plan.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.164-181
• /
• 2023

In a low speed limit environment, the speed limit tolerance of automated traffic enforcement devices is very high, which is one of the main factors for the low compliance rate. Therefore, in this study, we aimed to the improve the speed limit tolerance and to present a new standard. The effects of the operator and user errors that can cause speeding by drivers were analyzed. Based on the results of the analysis, an improvement of the tolerance was proposed by applying an error in the enforcement device and GPS speed. In addition, long-term expected safety effects such as the accident rate and severity were estimated from the operator's perspective when improving the tolerance. As a result of the estimation, the speed limit compliance rate, accident rate, and change rate of a number of severe accidents due to speed change, and pedestrian traffic accident mortality rate were all improved in all speed limit environments. The introduction of the proposed improvement is expected to improve road safety significantly.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.129-136
• /
• 2017

This study investigated the probability of possible accident through qualitative and quantitative analysis of the pressure safety valve types installed in facilities using high pressure gas to compare the installation domestic and foreign pressure safety valve standards sought the safety characteristics and safety improvement direction accordingly. The three types are the case where the shut-off valve is not installed at the front of the PSV (Case A), If a shut-off valve is installed at the front of the PSV for inspection (Case B) and If a shut-off valve is installed in front of PSV (C.S.O), PSV is installed in parallel (Case C). Three types of cases were compared with FTA and HAZOP. The results of study of the possible accidents due to over-pressure safety valve installation type, used in a high-pressure gas facilities was shows in the following order Case B > Case A > Case C. The results of analysis through FTA was in order to protect the reservoir for the possible occurring of accident the safety valve installation is depend on its type. In the FTA analysis, defects in the device itself which attached to the storage tank as a substitute for analysis of the probability of operator mistakes was Case B with as high as $2.01{\times}10^{-6}$. Depending on the type of installation analysis of Case B in order to ensure safety is prohibited to install shut-off valve and believes that mandatory regulations are needed. Rationally installing of pressure safety valve in the high pressure using facilities will be expected to improve the industrial safety from severe accidents such as high-pressure gas fire explosion.