• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.181-192
• /
• 2007

Periodontal surgery as part of the treatment of periodontal disease is mainly performed 1) to gain access to diseased areas for adequate cleaning; 2) to achieve pocket reduction or elimination; and 3) to restore the periodontal tissues lost through the disease; i.e., a new attachment formation of periodontal regeneration. To accomplish the latter, often referred to as the ultimate goal of periodontal therapy, a number of surgical procedures have been advocated throughout the years. Clinical studies have demonstrated that considerable gain of clinical attachment and bone can be achieved following guided tissue regeneration (GTR) therapy of intrabony defects. The aim of this study was to analyse the radiographic bone changes 2-year after GTR using a bone graft material and nonresorbable membrane. Patients attending the department of periodontics of Kyungpook National University Hospital were studied. Patients had clinical and radiographic evidence of intrabony defect(s), 33 sites of 30 patients aged 32 to 56 (mean age 45.6) were treated by GTR with a bone graft material and nonresorbable membrane. Baseline and 2-year follow-up radiographs were collected and evaluated for this study. Radiographic assessment includes a bone fill, bone crest change, defect resolution, and % of defect resolution. Pre- and post-treatment differences between variables (maxilla and mandible, defect depth, defect angle, bone graft materials) using the paired t-test were examined. We observed $2.86{\pm}1,87mm$ of bone fill, $065{\pm}0.79mm$ of crestal resorption, $3.49{\pm}2.11mm$ of defect resolution, and $44.42{\pm}19.51%$ of percentage of defect resolution. Mandible, deeper initial defect depth, narrower initial defect angle showed greater bone fill, defect resolution, and % of defect resolution. But no difference was observed between xenograft and allograft. Outcome of GTR as a therapy of intrabony defect was better than other therapy, but herein, good oral hygiene maintenance as a anti-infective treatment and periodic recall check of patients are essential.

• 수산경영론집
• /
• 제11권1_2호
• /
• pp.115-155
• /
• 1980

Nowadays managers of fisheries enterprises and users of accounting information have a considerable interest in the fishery right. The fishery right, which is given by administrative quarters, is referred to exclusive fishing right in a certain coastal fishing ground, and it has been one of the property rights since the turn of the century. The main purpose of this study is to provide an improved accounting method of the fishery right from the side of accounting. To achieve this purpose, legal nature of the fishery right should be understood in the first place, for the fishery right, an intangible asset, is a sort of property right guaranteed by the fisheries laws, According to the basic law in the fisheries "Fisheries Law, " the fishery right is broken down largely into three categories; culture fishing right, set fishing right and common fishing right. The legal characteristics of these fishery rights are as followings: 1. The fishery right is a private right. 2. The fishery right is a property right. 3. The fishery right is a right in rem, and legal provisions pertaining to land are applied to the fishery right with necessary modifications. In addition to the above fishery rights, the Fisheries Law provides some provisions on the so-called entrance right, and those who obtained the right are authorized to access to a certain common fishing right fishing ground where they have been traditionally fishing. In the inland fisheries, the fishery right system similar to that of the coastal fisheries discussed above is adopted in conformity with the Inland Fisheries Developing and Expediting Law. Viewing from an angle of accounting, there are two kinds of additional fishing rights which are dealt as assets. These fishery rights dealt as asset include the license of entry in the so-called permitted fishing which is also called as fishery right in plain language, and tile entrance right obtained abroad. Although these two kinds of rights are not the fishery right from a viewpoint of law, they are regarded as fishing rights in accounting which intends to provide a useful economic information.formation.

• 방송공학회논문지
• /
• 제22권4호
• /
• pp.473-483
• /
• 2017

최근 들어, 3D 서비스, UHD 비디오, 가상현실(Virtual Reality, VR) 등의 다양한 서비스에 대한 공급 및 수요가 증가하고, 이러한 시장의 동향에 따라, 고품질 및 대화면의 콘텐츠에 대한 수요도 함께 증가하고 있다. UWV 서비스는 기존 파노라마보다 넓은 시야각을 이용하여 사용자들에게 생동감 있는 경험을 제공하고 해당 이벤트에 대한 이해도를 증진하는 서비스이며, 본 논문에서는 UWV 서비스를 제공하기 위한 공간 유사도 맵 생성 방법 및 UWV 파일 저장 포맷 기술을 제안한다. 공간 유사도 맵은 영상의 유사도를 측정하고, 측정된 유사도를 기반으로 하여 영상의 위치 정보를 생성하고 기록한 것으로, 이를 이용하여 영상의 정합 시간을 단축해, 대화면 콘텐츠의 생성시간을 단축시킬 수 있다. UWV 파일 포맷은 ISOBMFF를 기반으로 한 공간 유사도 맵 및 대화면을 구성하는 각 콘텐츠를 함께 처리할 수 있는 파일 포맷이며, 랜덤 액세스를 지원한다. 본 논문에서는 공간 유사도 맵 및 UWV 파일 포맷 검증하기 위해 UWV 플레이어를 설계하였고, 실험을 통한 결과를 보였다.

• Journal of Computing Science and Engineering
• /
• 제5권3호
• /
• pp.210-222
• /
• 2011

In this work, we study the problem of privacy-preservation data publishing in moving objects databases. In particular, the trajectory of a mobile user in a plane is no longer a polyline in a two-dimensional space, instead it is a two-dimensional surface of fixed width $2A_{min}$, where $A_{min}$ defines the semi-diameter of the minimum spatial circular extent that must replace the real location of the mobile user on the XY-plane, in the anonymized (kNN) request. The desired anonymity is not achieved and the entire system becomes vulnerable to attackers, since a malicious attacker can observe that during the time, many of the neighbors' ids change, except for a small number of users. Thus, we reinforce the privacy model by clustering the mobile users according to their motion patterns in (u, ${\theta}$) plane, where u and ${\theta}$ define the velocity measure and the motion direction (angle) respectively. In this case, the anonymized (kNN) request looks up neighbors, who belong to the same cluster with the mobile requester in (u, ${\theta}$) space: Thus, we know that the trajectory of the k-anonymous mobile user is within this surface, but we do not know exactly where. We transform the surface's boundary poly-lines to dual points and we focus on the information distortion introduced by this space translation. We develop a set of efficient spatiotemporal access methods and we experimentally measure the impact of information distortion by comparing the performance results of the same spatiotemporal range queries executed on the original database and on the anonymized one.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.245-250
• /
• 2008

This study is on the availability of solar thermal energy in Korean high-rise apartment complex depending on the installation type of solar collectors to roof or facade of building. Firstly, solar access evaluation on the roof and the facade of apartment buildings was carried out. The total thermal load of each apartment unit and building was investigated and matched with the energy which was produced by solar thermal systems on the facade. The considered layout patterns of apartment buildings were '一type', 'alternative 一type', 'ㄱtype' and 'ㅁtype' and that was analyzed in prior studies. Extensive dynamic hourly energy simulations with the solar thermal system were Performed with the TRNSYS of SEL. We assumed that the apartment complex is composed of 9 buildings and located in Daejeon. The collectors are the heat-pip evacuated tube collectors and the number of collectors are 45 tubes We assumed that the collectors are installed on the balcony of each unit and the angle of incilnation is $90^{\circ}$. As a result, the supply amount of solar thermal systems is about 4,850,086kJ/hr and the solar fraction is about 66%. The solar fraction according to each azimuth is about 66% on the south, 62% on the south-east $30^{\circ}$ and 56% on the south-east $60^{\circ}$. So, we quantitatively got a line on the optimal azimuth for installing the solar thermal systems. The solar fraction has differences from 5% to 15% of each floor, 6th, 12th and 20th and those tendencies are same in analyzed each 4 types of the apartment complexes.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.119-133
• /
• 1998

To implement full automation in pipe welding, it si most important to develop special sensors and their related systems which act like human operator when detecting irregular groove conditions. In this study, an automatic pipe Gas Metal Arc Welding (GMAW) system was proposed to full control pipe welding procedure with intelligent sensor systems. A five-axes manipulator was proposed for welding torch to automatically access to exact welding position when pipe size and welding angle were given. Pool status and torch position were measured by using a weld-pool image monitoring and processing technique in root-pass welding for weld seam tracking and weld pool control. To overcome the intensive arc light, pool image was captured at the instance of short circuit of welding power loop. Captured image was processed to determine weld pool shape. For weld seam tracking, the relative distance of a torch position from the pool center was calculated in the extracted pool shape to move torch just onto the groove center. To control penetration of root pas, gap was calculated in the extracted pool image, and then weld conditions were controlled for obtaining appropriate penetration. welding speed was determined with a fuzzy logic, and welding current and voltage were determined from a data base to correspond to the gap. For automatic fill-pass welding, the function of human operator of real time weld seam control can be substituted by a sensor system. In this study, an arc sensor system was proposed based on a fuzzy control logic. Using the proposed automatic system, root-pass welding of pipe which had gap variation was assured to be appropriately controlled in welding conditions and in torch position by showing sound welding result and good seam tracking capability. Fill-pass welding by the proposed system also showed very successful result by tracking along the offset welding line without any control of human operator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.647-650
• /
• 2006

Low temperature polycrystalline silicon (LTPS) technology using a high power laser have been widely applied to thin film transistors (TFTs) for liquid crystal, organic light emitting diode (OLED) display, driver circuit for system on glass (SOG) and static random access memory (SRAM). Recently, the semiconductor industry is continuing its quest to create even more powerful CPU and memory chips. This requires increasing of individual device speed through the continual reduction of the minimum size of device features and increasing of device density on the chip. Moreover, the flat panel display industry also need to be brighter, with richer more vivid color, wider viewing angle, have faster video capability and be more durable at lower cost. Kornic Systems Co., Ltd. developed the $KORONA^{TM}$ LTP/GLTP series - an innovative production tool for fabricating flat panel displays and semiconductor devices - to meet these growing market demands and advance the volume production capabilities of flat panel displays and semiconductor industry. The $KORONA^{TM}\;LTP/GLTP$ series using DPSS laser and XeCl excimer laser is designed for the new generation of the wafer & FPD glass annealing processing equipment combining advanced low temperature poly-silicon (LTPS) crystallization technology and object-oriented software architecture with a semistandard graphical user interface (GUI). These leading edge systems show the superior annealing ability to the conventional other method. The $KORONA^{TM}\;LTP/GLTP$ series provides technical and economical benefits of advanced annealing solution to semiconductor and FPD production performance with an exceptional level of productivity. High throughput, low cost of ownership and optimized system efficiency brings the highest yield and lowest cost per wafer/glass on the annealing market.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1547-1552
• /
• 2008

The tip of these catheter with straight needles is not able to reach in the vicinity of the disc bulging, which are the cause of the low back pain and because the far indirect radio-frequency treatment results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body catheter device. To increase the possibility of nucleoplasty, the needle tip should be located at the closest area of the lesion. For this reason, the best way to increase the success rate of the operation is that the needle tip should access 3-dimensionally to the operating field as soon as possible. To achieve this aim, our studies are restricted as follows: 1) the SMA catheter design to control the 3-dimensional direction, 2) the security of the immediate response by the positive control of the SMA element thermal distribution using Peltier thermoelectric elements, 3) the aquisition of the control data by monitoring the relationship between the temperature of SMA element and the displacement, and 4) the design of the controller to guarantee the accurate location.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.68-69
• /
• 2005

BTO ($BaTiO_3$) thin film is one of the high dielectric materials for high-density dynamic random access memories (DRAMs) due to its relatively high dielectric constant. It is generally known that BTO film is difficult to be etched by plasma etching, but high etch rate with good selectivity to pattern mask was required. The problem of sidewall angle also still remained to be solved in plasma etching of BTO thin film. In this study, we first examined the patterning possibility of BTO film by chemical mechanical polishing (CMP) process instead of plasma etching. The sputtered BTO film on TEOS film as a stopper layer was polished by CMP process with the self-developed $BaTiO_3$- and $TiO_2$-mixed abrasives slurries (MAS), respectively. The removal rate of BTO thin film using the$ BaTiO_3$-mixed abrasive slurry ($BaTiO_3$-MAS) was higher than that using the $TiO_2$-mixed abrasive slurry ($TiO_2$-MAS) in the same concentrations. The maximum removal rate of BTO thin film was 848 nm/min with an addition of $BaTiO_3$ abrasive at the concentration of 3 wt%. The sufficient within-wafer non-uniformity (WIWNU%)below 5% was obtained in each abrasive at all concentrations. The surface morphology of polished BTO thin film was investigated by atomic force microscopy (AFM).

• 터널과지하공간
• /
• 제24권1호
• /
• pp.55-66
• /
• 2014

본 연구에서는 절리구조의 기하학적 특성을 분석하기 위해 사진측량기법을 효율적으로 현장에 적용하기 위한 절리조사 시스템을 개발하였다. 개발된 시스템은 하드웨어와 해석 소프트웨어로 구성된다. 하드웨어는 암반 절리구조의 영상촬영을 위한 영상 촬영 시스템, 카메라의 촬영방향과 높이를 제어하는 촬영방향 제어 시스템, 그리고 카메라 매개변수 중 회전각 성분을 측정하기 위한 디지털 컴퍼스로 구성되었다. 해석 소프트웨어는 사진촬영을 통해 얻어진 이미지 자료로부터 절리의 방향성, 밀도 및 평균 길이를 분석하기 위해 개발하였으며 JointeXtractor로 명명하였다. 개발된 시스템을 암반 상부와 수목이나 낙석방지 울타리의 설치로 인해 접근이 어려운 지역 등 수작업 조사자가 측정할 수 없는 경우의 현장에 적용한 결과 절리의 방향성 및 밀도, 평균 길이를 정량적으로 분석할 수 있었다.