• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2000

Bioconversion of fumarate to succinate was anaerobically conduced in a synthetic medium containing glycerol as a hydrogen donor and fumarate as a hydrogen acceptor. We investigated the effects of pH, carbon and nitrogen sources, conversion substrate, and other culture conditions on the production of succinate using a nwely isoloated Enterococcus facalis PKY1. Addition of a variety of carbonates to the medium significantly increasd the rates of production of succinate. The production of succinate and cell growth were relatively satisfactory in the pH range of 7.0-7.6. By using glycerol as a hydrogen donor, high purity succinate was produced with few byproducts. Yeast extract as a sole nitrogen source was the most effective for producing succinalte. As a result, the optimum condition of biconversion was obtained at a medium containing 20g/I glycerol, 50 g/l fumarate, 15 g/l yeast extract, 10 g/l $K_2HPO_4$, 1 g/I NaCl, 50ppm $MgCl_2{\cdot}6H_2O$, 10ppm $FeSo_4{\cdot}7H_2O$, and 5 g/I $Na_2CO_3$ at pH 7.0-7.6. Under the optimum condition, a succinate concentration of 153 g/I was produced in 36 h. The total volumetric production rate and the molar yield of succinate were 4.3 g/l/h and 85%, respectively.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.624-629
• /
• 2005

The purpose of this study is to investigate the performance of nitrogen removal using autotrophic microorganism in the Membrane-Attached Biofilm Reactor (MABR). The treatment system consists of an aerobic MABR (R1) for nitrification and an anaerobic MABR (R2) for hydrogenotrophic denitrification. Oxygen and hydrogen were supplied through the lumen of hollow-fiber membranes as electron acceptor and donor, respectively. In phase Ι, simultaneous organic carbon removal and nitrification were carried out successfully in R1. In phase II, to develop the biofilm on the hollow-fiber membrane surface and to acclimate the microbial community to autotrophic condition, R1 and R2 were operated independently. The MABRs, R1 and R2 were connected in series continuously in phase III and operated at HRT of 8 hr or 4 hr with $NH_4{^+}-N$ concentration of influent, from 150 to 200 mgN/L. The total nitrogen removal efficiency reached the maximum value of 99% at the volumetric nitrogen loading rate of $1.20kgN/m^3{\cdot}d$ in the combined MABR system with R1 and R2. The results in this study demonstrated that the combined MABR system could operate effectively for the removal of nitrogen in wastewater not containing organic materials and can be used stably as a high rate nitrogen removal technology.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.23-30
• /
• 1997

Semiconductive SrTiO3 ceramic bodies were prepared by conventional ceramic powder processes in-cluding sintering in a reducing atmosphere. Sodium or potassium ions were diffused from the surface of the sintered bodies into the inner region using thermal diffusion process at 800-120$0^{\circ}C$. The effects of such ther-mal treatments on the electrical and chemical characteristics of the grain boundaries were investigated. The presence of sodium or potassium ions at grain boundaries produces non-linear current-voltage behaviors, electrical boundary potential barriers of 0.1-0.2eV, and threshold voltages of 10-70V. The diffused ions form diffusion layers with thicknesses of 20-50nm near the grain boundaries, reducing the concentration of strontium and oxygen.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.4
• /
• pp.436-443
• /
• 2007

Anaerobic reductive dehalogenation of perchloroethene (PCE) was studied with lactate as the electron donor in a continuously stirred tank reactor (CSTR) inoculated with a mixed culture previously shown to dehalogenate vinyl chloride (VC). cis-1,2- dichloroethene (cDCE) was the dominant intermediate at relatively long cell retention times (>56 days) and the electron acceptor to electron donor molar ratio (PCE:lactate) of 1:2. cDCE was transformed to VC completely at the PCE to lactate molar ratio of 1:4, and the final products of PCE dehalogenation were VC (80%) and ethene (20%). VC dehalogenation was inhibited by cDCE dehalogenation. Propionate produced from the fermentation of lactate might be used as electron donor for the dehalogenation. Batch experiments were performed to evaluate the effects of increased hydrogen, VC, and trichloroethene (TCE) on VC dehalogenation which is the rate-limiting step in PCE dehalogenation The addition of TCE increased the VC dehalogenaiton rate more than an increase in the $H_2$ concentration, which suggests that the introduction of TCE induces the production of an enzyme that can comtabolize VC.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.290-293
• /
• 2003

Ohmic contact characteristics of Al ion implanted n-type SiC wafer were investigated. Al ions implanted with high dose to obtain the final concentration of $5{\times}10^{19}/cm^3$, then annealed at high temperature. Firstly, B ion ion implanted p-well region were formed which is needed for fabrication of SiC devices such as DIMOSFET and un diode. Secondly, Al implanted high dose region for ohmic contact were formed. After ion implantation, the samples were annealed at high temperature up to $1600^{\circ}C\;and\;1700^{\circ}C$ for 30 min in order to activate the implanted ions electrically. Both the inear TLM and circular TLM method were used for characterization. Ni/Ti metal layer was used for contact metal which is widely used in fabrication of ohmic contacts for n-type SiC. The metal layer was deposited by using RF sputtering and rapid thermal annealed at $950^{\circ}C$ for 90sec. Good ohmic contact characteristics could be obtained regardless of measuring methods. The measured specific contact resistivity for the samples annealed at $1600^{\circ}C\;and\;1700^{\circ}C$ were $1.8{\times}10^{-3}{\Omega}cm^2$, $5.6{\times}10^{-5}{\Omega}cm^2$, respectively. Using the same metal and same process of the ohmic contacts in n-type SiC, it is found possible to make a good ohmic contacts to p-type SiC. It is very helpful for fabricating a integrated SiC devices. In addition, we obtained that the ratio of the electrically activated ions to the implanted Al ions were 10% and 60% for the samples annealed at $1600^{\circ}C\;and\;1700^{\circ}C$, respectively.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.36-42
• /
• 1993

In the presence of $Ca^{2+}$ ion, the charge transfer (CT) interaction of nonionic surfactants, $nonylphenol-(ethylene oxide)_n\;[NP-(EO)_n; n = 11, 40, 100]$ with iodine in aqueous solution were investigated by UV-visible spectrophotometer. The characteristics of spectra depended on the concentration of $Ca^{2+}$ ion and the number of EO unit. Above CMC, the intensity of the CT band by the addition of $Ca^{2+}$ ion for the $NP-(EO)_{11}$ and $NP-(EO)_{40}$ increased and then decreased, while for the $NP-(EO)_{100}$ continuously increased. The increase in the intensity of CT band were attributed to the compactness of micelle in the presence of $Ca^{2+}$ ion. These phenomena may be explained by the fact that the linear ethylene oxide (EO) chain, to be free configuration in aqueous solution, could form a pseudo-crown ether structures capable of forming complexes with $Ca^{2+}$ ion.

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.330-337
• /
• 1987

The weak UV absorbing ephedrine alkaloids such as ephedrine, pseudoephedrine, methylephedrine and norephedrine could be analyzed by charge-transfer spectrophotometric method. The results obtained are summarized as follows: (1) It was possible to determine a weak UV absorbing ephedrine alkaloids using the intense charge-transfer UV bands in chloroform. (2) This method was suitable for the spectrophotometric determination of ephedrine alkaloids in mixed pharmaceutical preparation. (3) Linear relationship was found between absorbance and concentration in the range of 1.0$\times$$10^{-5}M$~5$\times$$10^{-5}M$ of ephedrine ($\varepsilon$= 2.72$\times$$10^{4}LM^{-1}cm^{-1}$ and pseudoephedrine ($\varepsilon$=2.84$\times$$10^{4]LM^{-1}cm^{-1}$), 1.0$\times$$10^{-5}M$~5$\times$$10^{-5}$M of methylephdrine ($\varepsilon$=1.68$\times$$10^{4}LM^{-1}cm^{-1}$) and 1/3$\times$$10^{-4}M$~4/3$\times$$10^{-4}M$ of norephedrine ($\varepsilon$=0.74$\times$$10^{4}LM^{-1}cm^{-1}$. (4) CT- complex of ephedrine, pseudoephedrine and methylephedrine has absorption maxima at 293nm and norephedrine have absorption maximum at 253nm. (5) CT-complexes were formed in a 1:1 ratio between ephedrine alkaloids and iodine in chloroform. (6) By UV, IR, and $^1H$-NMR spectra, it could be inferred that CT-complexes were formed by interaction between the basic nitrogen of ephedrine alkaloids as electron (n) donor and iodine as electron ($\sigma$) acceptor.

• Korean Journal of Materials Research
• /
• v.26 no.2
• /
• pp.84-89
• /
• 2016

We present the rectifying and nitrogen monoxide (NO) gas sensing properties of an oxide semiconductor heterostructure composed of n-type zinc oxide (ZnO) and p-type copper oxide thin layers. A CuO thin layer was first formed on an indium-tin-oxide-coated glass substrate by sol-gel spin coating method using copper acetate monohydrate and diethanolamine as precursors; then, to form a p-n oxide heterostructure, a ZnO thin layer was spin-coated on the CuO layer using copper zinc dihydrate and diethanolamine. The crystalline structures and microstructures of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy. The observed current-voltage characteristics of the p-n oxide heterostructure showed a non-linear diode-like rectifying behavior at various temperatures ranging from room temperature to $200^{\circ}C$. When the spin-coated ZnO/CuO heterojunction was exposed to the acceptor gas NO in dry air, a significant increase in the forward diode current of the p-n junction was observed. It was found that the NO gas response of the ZnO/CuO heterostructure exhibited a maximum value at an operating temperature as low as $100^{\circ}C$ and increased gradually with increasing of the NO gas concentration up to 30 ppm. The experimental results indicate that the spin-coated ZnO/CuO heterojunction structure has significant potential applications for gas sensors and other oxide electronics.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1058-1064
• /
• 1994

Mn/In$_2O_3$ systems with a variety of Mn mol${\%}$ were prepared to investigate the effect of Mn-addition on the catalytic activity of Mn/In$_2O_3$ in the oxidative coupling of methane. The oxidative coupling of methane was examined on pure In$_2O_3$ and Mn/In$_2O_3$ catalysts by cofeeding gaseous methane and oxygen under atmospheric pressure between 650 and 830 $^{\circ}C$. Although pure In$_2O_3$ showed no C$_2$ selectivity, both the C$_2$ yield and the C$_2$ selectivity were increased by Mn-doping. The 5.1 mol${\%}$ Mn-doped In$_2O_3$ catalyst showed the best C$_2$ yield of 2.6${\%}$ with a selectivity of 19.1${\%}$. The electrical conductivities of pure and Mn-doped In$_2O_3$ systems were measured in the temperature range of 25 to 100 $^{\circ}C$ at PO$_2$'S of 1 ${\times}$ 10$^{-7}$ to 1 ${\times}$ 10 $^{-1}$ atm. The electrical conductivities were decreased with increasing Mn mol${\%}$ and PO$_2$, indicating the specimens to be n-type semiconductors. Electrons serve as the carriers and manganese can act as an electron acceptor in the specimens. Manganese ions doped in In$_2O_3$ inhibit the ionization of neutral interstitial indium or the transfer of lattice indium to interstitial sites and increase the formation of oxygen vacancy, giving rise to the increase of the concentration of active oxygen ion on the surface. It is suggested that the active oxygen species adsorbed on oxygen vacancies are responsible for the activation of methane.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.445-452
• /
• 2021

This paper is an experimental study using eye-tracking on the visual attention of TV entertainment programs with PPL products being shoveled by the acceptor. As a result of analysis, first, there was no difference in the exposure time of the PPL product, which is deemed to have little effect on the subject's attention. Second, there was no difference in the PPL product's prominence, and we could see that the focus was on subtitles or the faces of the cast. Third, the concentration of attention on PPL products was higher when there were more famous cast members than there were when there were low-profile cast members, and the appearance of famous cast members was judged to be very effective in order to focus more attention on PPL products. In conclusion, when exposing PPL products in entertainment programs, it is believed that the more popular the cast members appear on entertainment shows, such as famous broadcasters, celebrities, and stars, the more effective the PPL products are, rather than the exposure time and prominence of PPL products, the more effective the companies will be in advertising the popular and likable celebrities.