• Title/Summary/Keyword: Acceptance rate

Search Result 403, Processing Time 0.026 seconds

A Dynamic Placement Mechanism of Service Function Chaining Based on Software-defined Networking

  • Liu, Yicen;Lu, Yu;Chen, Xingkai;Li, Xi;Qiao, Wenxin;Chen, Liyun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.12 no.10
    • /
    • pp.4640-4661
    • /
    • 2018
  • To cope with the explosive growth of Internet services, Service Function Chaining (SFC) based on Software-defined Networking (SDN) is an emerging and promising technology that has been suggested to meet this challenge. Determining the placement of Virtual Network Functions (VNFs) and routing paths that optimize the network utilization and resource consumption is a challenging problem, particularly without violating service level agreements (SLAs). This problem is called the optimal SFC placement problem and an Integer Linear Programming (ILP) formulation is provided. A greedy heuristic solution is also provided based on an improved two-step mapping algorithm. The obtained experimental results show that the proposed algorithm can automatically place VNFs at the optimal locations and find the optimal routing paths for each online request. This algorithm can increase the average request acceptance rate by about 17.6% and provide more than 20-fold reduction of the computational complexity compared to the Greedy algorithm. The feasibility of this approach is demonstrated via NetFPGA-10G prototype implementation.

Effect of Different Cooking Methods and Temperatures on Physicochemical and Sensory Properties of Pork Hams: Ocoo, Sous-Vide, steaming, and boiling (조리 온도와 조리 방법에 따른 돼지고기 뒷다리살의 물리 화학적 및 관능적 품질차이 비교연구)

  • Jeon, Min-Sun;Shim, Je-Won;Yoon, Sun
    • Korean journal of food and cookery science
    • /
    • v.29 no.3
    • /
    • pp.309-316
    • /
    • 2013
  • Quality changes of cooked meat products are dependent upon cooking temperature and heating methods. Pork ham is the most preferred pork dish using pork hams in South Korea although it is not suited to various cooking methods because its low fat content does not provide desirable physiochemical and sensory properties to consumers. Therefore, the objective of this study was to evaluate the effect of four different cooking methods on pork legs by comparing Ocoo, Sous-vide, steaming, and boiling technique at $80^{\circ}C$ and $100^{\circ}C$. Ultimately, the most effective cooking method and temperature to improve the quality of cooked pork hams was investigated. As the results of texture analysis, the samples cooked using Ocoo and Sous-vide methods showed higher springiness and cohesiveness than those using steaming and boiling methods. For the sensory evaluation, participants liked the hardness, juiciness, chewiness, tenderness of the samples using the OC method, resulting in the highest overall acceptance rate. The results of this study showed that using Ocoo or Sous-Vide cooking methods can improve the quality of cooked pork hams in both physicochemical and sensory properties.

Performance and Reliability Characteristics of the Free Piston Free Displacer Stirling Cryocooler

  • Park, Seong-Je;Hong, Yong-Ju;Kim, Hyo-Bong;Koh, Deuk-Yong;Kim, Yang-Hoon
    • Progress in Superconductivity and Cryogenics
    • /
    • v.6 no.2
    • /
    • pp.46-51
    • /
    • 2004
  • This paper presents the results of a series of performance and reliability tests for the Stirling cryocooler. Infrared sensor systems incorporating cryocoolers are required to be qualified to the appropriate specification for the performance and reliability. FPFD Stirling cryocooler is currently under development for cooling infrared detector. Manufactured Stirling cryocooler delivers approximately 0.9W cooling at 80K for 30W∼40W of input power. It takes approximately 2 minutes to cool down to 80K at the ambient temperature of 23$^{\circ}C$. Performance characteristics for the vibration, acoustic noise, EMI and leak rate of the Stirling cryocooler are evaluated. We performed low and high temperature keeping test from -32$^{\circ}C$ to +52$^{\circ}C$ and operating test at high and low temperature cyclic range with acceptance tests performed at scheduled intervals. Cooling capacity is determined as a function of the temperatures at the compressor, hot end and cold tip at the expander. Finally, we describe the experimental facility for the MTTF evaluation and some typical results of the Stirling cryocooler.

Estimates of Genetic Correlations between Production and Semen Traits in Boar

  • Oh, S.H.;See, M.T.;Long, T.E.;Galvin, J.M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.2
    • /
    • pp.160-164
    • /
    • 2006
  • Currently, boars selected for commercial use as AI sires are evaluated on grow-finish performance and carcass characteristics. If AI sires were also evaluated and selected on semen production, it may be possible to reduce the number of boars required to service sows, thereby improving the productivity and profitability of the boar stud. The objective of this study was to estimate genetic correlations between production and semen traits in the boar: average daily gain (ADG), backfat thickness (BF) and muscle depth (MD) as production traits, and total sperm cells (TSC), total concentration (TC), volume collected (SV), number of extended doses (ND), and acceptance rate of ejaculates (AR) as semen traits. Semen collection records and performance data for 843 boars and two generations of pedigree data were provided by Smithfield Premium Genetics. Backfat thickness and MD were measured by real-time ultrasound. Genetic parameters were estimated from five four-trait and one five-trait animal models using MTDFREML. Average heritability estimates were 0.39 for ADG, 0.32 for BF, 0.15 for MD, and repeatability estimates were 0.38 for SV, 0.37 for TSC, 0.09 for TC, 0.39 for ND, and 0.16 for AR. Semen traits showed a strong negative genetic correlation with MD and positive genetic correlation with BF. Genetic correlations between semen traits and ADG were low. Therefore, current AI boar selection practices may be having a detrimental effect on semen production.

Studies on the Characteristics of Muffins prepared with Allulose (알룰로스를 첨가하여 제조한 머핀의 특성 연구)

  • Hwang, Ja Young;Lee, Sun Mee
    • The Korean Journal of Food And Nutrition
    • /
    • v.31 no.1
    • /
    • pp.195-201
    • /
    • 2018
  • This study was intended to investigate the characteristics of muffins prepared with allulose which is low-calorie and physiologically functional rare sugar. Volume and specific volume of muffins increased significantly with allulose addition, but not with its contents. Muffin heights also increased as allulose was added more. Baking loss rate and moisture contents were not significantly different among samples. Allulose seemed to have nearly same water holding capacity with sucrose. Lightness of muffin crust and crumb both decreased, but redness and yellowness increased according to allulose, the reducing sugar addition by Maillard reaction. In the texture profile analysis, Hardness of AL100 was higher significantly (p<0.05) and springiness, cohesiveness and fracturability increased according to the allulose contents. In the sensory evaluation, AL0 was the sweetest and AL0 and AL25 got higher overall acceptance score. Physical characteristics were not different (p<0.05) among AL0, Al25 and AL50. As a result, 25% sucrose substitution with allulose can provide low-calorie, anti-hyperglycemic and tasty muffin.

Location of Refueling Stations for Geographically Based Alternative-Fuel Vehicle Demand (수요의 지역차를 고려한 대체연료 충전소 최적입지선정 : 플로리다 올랜도를 사례로)

  • Kim, Jong-Geun
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.15 no.1
    • /
    • pp.95-115
    • /
    • 2012
  • The initial market of alternative-fuel vehicle (AFV) will show geographically uneven distribution due to AFV's high price, and thus efficient location model should consider spatial variation of demand. This paper estimates AFV trips by incorporating an AFV demand estimation model with origin-destination (OD) trips. The estimates are the input for the flow-refueling location model that maximizes the OD flows that can be refueled by the given number of stations considering AFV's limited range per refueling. A scenario analysis is conducted by varying assumptions in estimating demands and AFV acceptance rate. Optimal location alternatives for Orland metropolitan area are provided and results are compared.

  • PDF

Quality Characteristics of White Bread Added with Beer (맥주를 첨가한 식빵의 품질 특성)

  • Seo, Sang-Wook;Lee, Kwang-Suck;An, Hye-Lyung
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.20 no.6
    • /
    • pp.863-872
    • /
    • 2010
  • The overall effects of three different beers on white bread were examined in terms of mixograph, pH, fermentation rate, TPA, crumbScan, colorimeter, sensory evaluation, and the hardness of bread through different storage times (0, 1, 2, 3 days), and texture as measured by texture analyzer. According to mixograph, the control (CON), black beer stout (BOB) and Asahi beer (AOB) but not max beer (MOB) were found to be proper between 3 and 5 minutes of peak time. All samples for peak value were at the level of over 60%. AOB showed the highest specific volume, and was the lowest in hardness (i.e. highest in softness) by TPA and storage days. In sensory evaluation, the difference test showed that AOB had the best volume, springiness, moistness, and softness. Moreover, in an overall preference test AOB scored the highest points in texture, flavor, taste, and overall acceptance.

Comparison on Physico-Chemical and Affective Properties in Mackerel Cooked by Electric Pan and under Superheated Steam (구이용 전기팬과 과열증기로 열처리한 고등어구이의 이화학적인 품질특성 및 기호도 비교평가)

  • Yu, Gwang Yeon;Cho, In Hee
    • Korean journal of food and cookery science
    • /
    • v.32 no.2
    • /
    • pp.204-210
    • /
    • 2016
  • Purpose: This study analyzed and compared the physico-chemical and affective properties between mackerels cooked by an electric pan and under superheated steam. Methods: Mackerel were cooked by an electric pan ($95^{\circ}C$) for 10 min and mackerel cooked under superheated steam ($250^{\circ}C$) for 5 min to be internal temperatures of $75{\pm}5^{\circ}C$ and tests to measure proximate composition, color values, texture profiles, microorganism counts and sensory acceptance were performed. Results: The moisture contents were 60.30% and 73.81% in mackerels cooked by electric pan and under superheated steam, respectively. The rate of weight loss in mackerel cooked by electric pan was 39%, whereas it was 29% in mackerel cooked under superheated steam. Mackerel cooked under superheated steam exhibited more yellowness, higher springiness, cohesiveness, gumminess, chewiness, and resilience with more acceptable preferences (appearance, odor, taste, and texture) compared to the mackerel cooked by electric pan. Conclusion: The application of superheated steam technology to fish products could reduce the cooking time and nutritional loss. Also, it could produce highly preferred fish products compared to that prepared by conventional electric pan.

Fermentation Characteristics of Takju Prepared with Lotus Leaf (연잎을 첨가한 탁주의 발효 특성)

  • Yoo, Ha-Na;Chung, Chang-Ho
    • Korean journal of food and cookery science
    • /
    • v.27 no.5
    • /
    • pp.577-587
    • /
    • 2011
  • In this study, lotus leaf was added to a Takju (Korean milky rice wine) preparation to evaluate its effects on physicochemical and fermentation properties. For rapid saccharification Takju was stored at 25$^{\circ}C$ for 2 days and then temperature was switched to 18$^{\circ}C$ to mature the wine for 21 days. From the start of fermentation to 2-days, the pH of Takju decreased rapidly and acidity increased. Maltose, a byproduct of starch saccharification, increased for 2 days then rapidly decreased. Glucose fluctuated for 7 days and of the 21-days fermentation. The ethanol production rate was highest during the first 7 days, then slowed. Total viable yeast and lactic acid bacterial counts increased rapidly for 2 days and then decreased gradually thereafter. Leuconostoc spp. grew rapidly for 1 day and sharply disappeared with decreasing pH. DPPH radical scavenging activity was significantly higher for Takju prepared with lotus leaf than without. The overall acceptance of Takju tended to increase when it was prepared with lotus leaf.

Quality Characteristics of White Pan Bread with Mulberry Extracts (오디 농축액을 첨가한 식빵의 품질 특성)

  • Lee, Seung-Byum;Lee, Kyung-Hee;Lee, Kwang-Suck
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.18 no.5
    • /
    • pp.805-811
    • /
    • 2008
  • The aim of this study was to investigate the effects of mulberry extracts on the physical characteristics of dough and the quality characteristics of oddi bread. The peak time of all experimental doughs except ME 25 (25% mulberry extracts) was suitable for breadmaking. The fermentation rate was decreased in accordance with the addition of mulberry extracts and the pH of the dough was decreased from 5.96 to 5.29. L values of oddi bread decreased with increasing mulberry extracts whereas, a and b values increased. The sensory evaluation indicated that crumb and crust color of the control bread was the brightest among the experiments. Flavor and taste was high as the addition of mulberry extracts. The overall acceptance was preferred at ME 25. Since the outcome of the mixograph at ME 25 tended to be low in bread-making, the utility of mulberry extracts at 20% (flour basis) was appropriate.

  • PDF