• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.231-238
• /
• 2016

Traditional acceptance sampling plans have focused on the proportion of nonconforming items as an attribute criterion for quality. In today's modern quality management under high quality production environments, the reduction of the deviation from a target value in a quality characteristic has become the most important purpose. In consequence, various inspection plans for the purpose of reducing the deviation from the target value in the quality characteristic have been investigated. In this case, a concept of the quality loss evaluated by the deviation from the target value has been accepted as the variable evaluation criterion of quality. Further, some quality measures based on the quality loss have been devised; e.g. the process loss and the process capability index. Then, as one of inspection plans based on the quality loss, the rigorous design procedure for the variable sampling plan having desired operating characteristics (VS-OC plan) indexed by the quality loss has been proposed by Yen and Chang in 2009. By the way, since the estimator of the quality loss obeys the non-central chi-square distribution, the rigorous design procedure for the VS-OC plan indexed by the quality loss is complicated. In particular, the rigorous design procedure for the VS-OC plan requires a large number of the repetitive and complicated numerical calculation about the non-central chi-square distribution. On the other hand, an approximate design procedure for the VS-OC plan has been proposed before the proposal of the above rigorous design procedure. The approximate design procedure for the VS-OC plan has been constructed by combining Patnaik approximation relating the non-central chi-square distribution to the central chi-square distribution and Wilson-Hilferty approximation relating the central chi-square distribution to the standard normal distribution. Then, the approximate design procedure has been devised as a convenient procedure without complicated and repetitive numerical calculations. In this study, through some comparisons between the rigorous and approximate design procedures, the applicability of the approximate design procedure has been confirmed.

• Journal of Hospice and Palliative Care
• /
• v.25 no.3
• /
• pp.110-120
• /
• 2022

Purpose: The purpose of this study was to confirm the factor structure of the McGill Quality of Life Questionnaire-Revised (MQOL-R) in the context of Korean culture and to verify its reliability and validity. Methods: The participants comprised terminal cancer patients aged 25 or older, and data from 164 participants were analyzed. The study was conducted in the following order: translation, expert review, reverse translation, preliminary investigation and interviews, and completion of the final version. Confirmatory factor analysis was applied to evaluate the validity of the instrument, and the Beck Depression Inventory, Korean version (K-BDI) was applied to confirm the criterion validity of the MQOL-R Korean version. The Cronbach's alpha coefficient, representing internal consistency, was measured to evaluate reliability. Results: Cronbach's alpha for all 14 questions was 0.862. The model fit indices for confirmatory factor analysis were within the acceptance criteria. The factor loadings of all four factors were over 0.50, and convergent validity and discriminant validity were confirmed. Regarding criterion validity, a negative correlation was found between the four factors of MQOL-R Korean version and the K-BDI. Conclusion: The MQOL-R Korean version, the reliability and validity of which were verified in this study, is a 15-item tool consisting of 14 items dealing with four physical, psychological, existential, and social factors and a single item evaluating the overall quality of life. The MQOL-R Korean version is an instrument that can more concisely and effectively measure the quality of life of patients with life-threatening diseases.

• Journal of Power System Engineering
• /
• v.17 no.3
• /
• pp.99-110
• /
• 2013

As the Western technologies have been introduced to our culture since the modern age. We have uncritically accepted Japanese style terminology for new things without reflection on the relations of concept, language and fact. Concept is the basis of human thinking and also a criterion of distinguishing what we see and hear. Thus, establishment of concept and naming are important once new technologies or objects are created. In the study, we will take automobile terminology which is relatively familiar to us for example in order to explain the importance of naming. We will reflect our reality where the Japanese style terminology and English style terminology for the automobile components and structures are mixed up and urge the need of establishing the easier terminology. Reorganizing the terminology is also important but automotive engineers and linguists need to work together on ways to translate the terminology into easier ones for common people.

• Steel and Composite Structures
• /
• v.18 no.4
• /
• pp.971-983
• /
• 2015

To promote greater acceptance and use of composite RCS systems, a two-bay two-story frame specimen with improved composite RCS joint details was tested in the laboratory under reversed cyclic loading. The test revealed superior seismic performance with stable load versus story drift response and excellent deformation capacity for an inter-story drift ratio up to 1/25. It was found that the failure process of the frame meets the strong-column weak-beam criterion. Furthermore, cracking inter-story drift ratio and ultimate inter-story drift ratio both satisfy the limitation prescribed by the design code. Additionally, inter-story drift ratios at yielding and peak load stage provide reference data for Performance-Based Seismic Design (PBSD) approaches for composite RCS frames. An advantage over conventional reinforced concrete and steel moment frame systems is that the displacement ductility coefficient of the RCS frame system is much larger. To conclude, the test results prove that composite RCS frame systems perform satisfactorily under simulated earthquake action, which further validates the reliability of this innovative system. Based on the test result, some suggestions are presented for the design of composite RCS frame systems.

• Journal of Korean Academy of Nursing
• /
• v.33 no.3
• /
• pp.414-424
• /
• 2003

Purpose: The purpose of this study was to develop elderly meaning in life scale with high validity and reliability. Method: The process of development of this scale were as follows. A conceptual framework composed of 4 phases of meaning in life of elderly was identified based on the literature review and interviews with elderlies and discussion with experts in meaning in life. Total 62 items, 4-points scale were developed. Through reliability testing, factor analysis, 40 preliminary items were selected. By means of internal consistency of 40 items, 2 items whose inner-items correlation coefficient was below .30 were deleted. Through factor analysis 1 item whose factor loading was below .30 was deleted. Finally 37 items were remained. To verify 37 items, factor analysis, reliability testing, LISEREL were done. Data were collected from 320 elderly subjects in Busan-KyungNam and Jeonla Province from May to June in 2002. SPSS WIN. 10.0 Program was used. Result: The result of factor analysis of 37 items, 8 factors were extracted. These factors were labeled as ‘self- awareness and self-acceptance’, ‘contentedness with life’, ‘purpose in life’, ‘love in family’, ‘role awareness’, ‘futuristic aspiration’, ‘commitment’, and ‘experience of love’. These factors included 4 phases of the meaning in life. Cronbach's Alpha of 37 items was .908 and correlation coefficient of PIL was .75. Conclusion: The researchers recommend the follows: The explorative study on the variables related to meaning in life are needed for criterion validity of this scale. The studies on meaning in life of different age groups, subjects are needed for reverification.

• Journal of Korean Institute of Industrial Engineers
• /
• v.8 no.1
• /
• pp.29-39
• /
• 1982

This paper presents a practical guidence for determining an optimal traffic control system at intersections in the urban areas in Korea. Two alternative systems, unsignalized and signalized, are considered. For analyzing the unsignalized system, two kinds of simulation model are developed ; gap acceptance model and first -in -first - out model. For the signalized system the total delay function for general arrival distribution is developed under the assumption that departure time is constant and it is used to find an optimal cycle time. Finally, the results in these two alternative systems are compared under the minimum average delay criterion and an optimal traffic control system is determined. This approach supports the decision making whether to install a traffic signal system in an intersection with given traffic flows and, if installed, determines what is the optimal cycle time and how the traffic signal phases are divided. And it also gives upper bounds of traffic flows to be passed in the unsignalized and the signalized system, which can be effectively used whenever an intersection is designed.

• Journal of Arbitration Studies
• /
• v.21 no.1
• /
• pp.131-155
• /
• 2011

PICC executes its role as a useful lex mercatoria in the continuously increasing international trade to be adopted as the standard criterion of prevention or dispute resolution. When considering the fact that GISG has not presented results beyond expectation in the past due to hard laws and legal deficiency, PICC, which possesses interpretation and supplementation function, is considered undoubtedly useful particularly in international commercial arbitration. As observed in the previously mentioned analysis on cases accumulated in UNILEX, PICC application and Arbitral tribunal in international contract between parties possess considerably large claim possibility and the number of actual application cases is continuously increasing. The fact that PICC has been composed as maximum common measures of continental and common law systems by traditional comparative legal scholars familiar with international trade can function as the fundamental principle in future global trade activity and can also act as the model law for uniting contract laws of nations. In this aspect, PICC can be evaluated to have considerably achieved enactment purpose of previous intention. However, additional topics that had not been accepted in the revised edition of PICC remain as assignments requiring solution, such as analysis and acceptance problem of comparative law, PR of PICC unfamiliar even to the relative parties of international trade and application in international contract, and absorption problem as model law in various domestic laws.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.29-35
• /
• 1996

For the Reactor Coolant System(RCS) flow rate measurement by the secondary calorimetric heat balance method, the coolant temperature of the hot leg is needed. Several Resistance Temperature Detectors(RTD) are installed in the hot leg to measure the temperature, but the average value of RTDs does not correctly represent the energy-averaged(bulk) temperature because of the thermal stratification phenomenon. Therefore some correction is introduced to predict the bulk temperature, but the correction inevitably contains uncertainty because the stratification is not defined well quantitatively yet. Therefore a large uncertainty for the correction has been used for the conservative estimation. But unrealistically large uncertainty causes degradation of the measurement method and yields difficulty to meet the acceptance criterion in start-up flow measurement test. In this paper, an analytical estimation is made on the correction and the related uncertainty using the measured hot leg velocity profile of System 80 reactor flow model test and the measured temperatures of YGN 3&4 and PVNGS 1&2 start-up tests. The results reveal that the magnitude of the correction uncertainty is much smaller than that used in the previous design. Therefore, the confidence on the flow rate measurement method can be improved and the difficulty in start-up flow measurement test can be lessened if the smaller correction uncertainty obtained through this estimation is applied.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.139-142
• /
• 2003

As composite materials are gaining wide acceptance in aircraft structure, repair of damaged composite is becoming an important issue. The issues in composite repair include high cost, material interchangeability, water ingression, and structural integrity. To address these problems, researchers have studied on the composite repair in various aspects. In this paper, an Internet-based advisory service (called Repair Advisory Service, RAS) for composite repair is proposed to increase efficiency for repair process. In the RAS system the web browser is used as its user interface, which provides easy access to the service. The RAS server provides web-based tools for failure prediction, Structural Repair Manual (SRM), automated prepreg cutting process, material properties, inventory and knowledge base. The computer codes implemented for repair design estimate the tensile failure and shear failure of repaired structures. The prediction of failure is based on the maximum strain criterion for tensile failure while elastic-perfect plastic shear failure model is applied for interfacial failure. The OEM's SRM is provided in the PDF format for viewing and searching by web browsers instead of looking up paper version SRM. The knowledge base in this site offers a room to share and distribute ideas, memos, publications, or suggestions from the repair engineers. The fabrication tool of RAS reads repair geometry from engineers then generates a CNC toolpath to cut prepreg patches. The RAS service is open to public and available at http://nano.gsnu.ac.kr/. Broad feedback from field technicians and engineers is welcome to improve the usefulness of RAS.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.119-126
• /
• 2006

The task scheduling in multiprocessor system is one of the key elements in the effective utilization of multiprocessor systems. The optimal assignment of tasks to multiprocessor is, in almost practical cases, an NP-hard problem. Consequently algorithms based on various modern heuristics have been proposed for practical reason. This paper proposes a new task scheduling algorithm using Genetic Algorithm which combines simulated annealing (GA+SA) in multiprocessor environment. In solution algorithms, the Genetic Algorithm (GA) and the simulated annealing (SA) are cooperatively used. In this method, the convergence of GA is improved by introducing the probability of SA as the criterion for acceptance of new trial solution. The objective of proposed scheduling algorithm is to minimize makespan. The effectiveness of the proposed algorithm is shown through simulation studies. In simulation studies, the result of proposed algorithm is better than that of any other algorithms.