• 한국구조물진단유지관리공학회 논문집
• /
• 제9권4호
• /
• pp.169-176
• /
• 2005

선박충돌의 위험이 있는 교량의 교각에 대해 연파괴빈도 계산을 수행하였다. 이러한 해석을 통해 각각의 교각에 대한 선박충돌 횡방향내하력을 결정할 수 있다. 교각의 횡방향내하력은 선박충돌 위험도 평가로부터 예측된 연파괴빈도와 허용기준을 비교하는 확률기반 해석과정을 통해 결정된다. 해석과정은 교량 각 부재요소에 대한 초기 충돌저항력을 가정하여 계산된 연파괴빈도가 허용기준을 만족하도록 해석변수를 반복 수정하면서 해를 찾는 과정이다. 일반적으로 선박충돌 위험이 있는 교각들에 대한 연파괴빈도 허용기준의 분배는 설계자의 공학적 판단에 근거한다. 본 연구에서는 선박충돌 위험도 평가로부터 사전 계산되는 연파괴빈도 할당 가중치에 의해 각각의 교각에 허용기준을 분배하였다.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.1-9
• /
• 2006

선박충돌의 위험이 있는 교량의 교각에 대해 연파괴빈도 계산을 수행하였다. 이러한 해석을 통해 각각의 교각에 대한 선박충돌 수평내하력을 결정할 수 있다. 교각의 수평내하력은 선박충돌 위험도 평가로부터 예측된 연파괴빈도와 허용기준을 비교하는 확률기반 해석과정을 통해 결정된다. 해석과정은 교량 각 부재요소에 대한 초기 충돌저항력을 가정하여 계산된 연파괴빈도가 허용기준을 만족하도록 해석변수를 반복 수정하면서 해를 찾는 과정이다. 일반적으로 선박충돌 위험이 있는 교각들에 대한 연파괴빈도 허용기준의 분배는 설계자의 공학적 판단에 근거한다. 본 연구에서는 선박충돌 위험도 평가로부터 사전 계산되는 연파괴빈도 할당 가중치에 의해 각각의 교각에 허용기준을 분배하였다. 주탑과 교각 등 교량 부재요소의 설계 수평내하력을 결정하기 위해 주탑과 교각의 충격저항력 비를 변수로 수치해석을 수행하였다. 설계 수평내하력은 수로의 기하형상, 수심, 교각의 배치, 선박 통행량의 특성에 의해 동일한 교량에서도 많은 변화가 있다. 따라서 연파괴빈도의 분배 모델과 수평내하력 결정에 대한 많은 연구가 요구된다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.275-279
• /
• 2002

A Bayesian acceptance sampling plan for limited failure populations are developed. We consider a situation where defective products have short lifetimes and non-defective ones never fail during the technological life of the products. An acceptance criterion which guarantees the out going quality of accepted products is derived using the prior information on the quality of lots submitted for inspection. Numerical examples are provided.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.152-159
• /
• 2002

An acceptance sampling plan for products manufactured from a production process with variable fraction defective is developed. We consider a situation where defective products have short lifetimes and non-defective ones never fail during the technological life of the products. An acceptance criterion which guarantee the out going quality of accepted products is derived using the prior information on the quality of products. Numerical examples are provided.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.340-350
• /
• 2015

This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the overconservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.659-662
• /
• 2004

An analysis of the AF is performed for each bridge pier exposed to ship collision. From this analysis, the impact lateral resistance can be determined for each pier. The bridge pier impact resistance is selected using a probability-based analysis procedure in which the predicted AF, from the ship collision risk assessment is compared to an acceptance criterion. In this study, the acceptance criterion is allocated to each pier using allocation weights based on the previous predictions. To determine the design impact lateral resistance of bridge components such pylon and pier, the numerical analysis is performed iteratively with the analysis variable of impact resistance ratio of pylon to pier. The design impact lateral resistance can vary greatly among the components of the same bridge, depending upon the waterway geometry, available water depth, bridge geometry, and vessel traffic characteristics.

• 화약ㆍ발파
• /
• 제28권2호
• /
• pp.119-132
• /
• 2010

각종 토목공사가 수행됨에 유발되는 소음 및 진동에 관한 민원사례가 증가하고 있다. 일반적으로 육상부보안물건에 대한 관리기준과 피해 발생시 분쟁을 해결하는 객관적 기준자료는 다수 확보된 상태이다. 그러나 수중 소음에 관한 객관적 자료나 기준은 부족한 상태이다. 수중 생태의 환경 검토는 국외의 경우 수중소음계를 이용한 수중소음계측 방식 및 계측 결과값에 대한 항목(최대소음레벨, 실효치, 노출소음레벨)별 관리기준을 제시하고 있으며, 청각역치 연구 결과를 토대로 관리기준을 제시하고 있다. 그러나 국내에서는 수중생태에 관한 연구자료 및 피해정도를 판단할 수 있는 관리기준의 설정이 미흡한 상태이다. 따라서 본 연구는 수중 소음 측정 장비를 활용한 합리적인 수중소음 관리기준 설정을 위한 방향을 모색하고자 한다.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.40-48
• /
• 2001

An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.75-76
• /
• 2018

• Journal of Pharmaceutical Investigation
• /
• 제39권4호
• /
• pp.233-242
• /
• 2009

Bioequivalence (BE) studies provide important information in the overall set of data that ensure the availability of safe and effective medicines to patients and practitioners. Thus its determination of proper criterion for assessing BE is very important. BE is frequently expressed or measured by estimating area under the plasma concentration-time curve (AUC) and maximum concentration ($C_{max}$) that are reflective of systemic exposure. In all countries except Canada, the acceptance criteria of BE is that the 90% confidence interval of difference in the average values of logarithmic AUC and $C_{max}$ between test and reference products is within the acceptable range of log(0.8) ${\sim}$ log(1.25). In Canada, unlike other countries, point estimation instead of applying 90% confidence interval is applied to assess $C_{max}$ which is, in essence, more variable than AUC. We also compared other parts of BE guidelines which include a fed study, average BE (ABE), scaled-ABE, population BE (PBE), individual BE (IBE), dropout & withdrawal, sampling frequency & time and number of subjects. This article reviews the most recent BE guidelines of Korea, USA, Europe, Canada and Japan, highlighting the differences focused on Korean BE guidelines compared to other countries. It will help us to revise BE guideline of Korea reflecting international trends. Finally, it is strongly recommended that the extended acceptance criterion for the highly variable drug among all the considering aspects for the revision of current BE guideline has to be adopted into Korea BE guideline in the nearest future.