• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.59-67
• /
• 2003

This paper presents a new approach for the use of smart materials, piezoelectric materials of PVDF and PZT, for vibration attenuation of a planar parallel manipulator. Since lightweight linkages of parallel manipulators deform under high acceleration/deceleration, an active damper is needed to attenuate vibration due to structural flexibility of linkages. Based on the dynamic model of a planar parallel manipulator, an active damping controller is developed, which consists of a PD feedback control scheme, applied to linear electrical motors, and a linear velocity feedback (L-type) scheme applied to either PVDF layer or PZT actuator(5). Simulation results show that piezoelectric materials yield good damping performance, resulting in precise manipulations of a planar parallel manipulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1996-1998
• /
• 1998

This paper deals with the tension control of continuous processing line for steel plant. In order to improve the tension control performance, tension control is included in POR. FF compensation is applied to get the same speed characteristics during acceleration and deceleration period. In simulation roll diameter variation and inertia variation are considered. It becomes clear that the proposed tension control system has high accuracy performance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.701-707
• /
• 2000

This paper proposes a tension control to compensate friction loss using on-line friction torque observer for a continuous strip processing line. Friction loss of roller results in significant deviation of strip tension, accordingly it has an influence on the operation of other adjacent rolls. To avoid tension variation of the strip, a friction torque observer is designed in adjacent roll, which operates in speed control mode. The observed torque is added to the torque limit reference of the pay-off reel for on-line compensation of both friction loss and acceleration/deceleration torque at the same time. The simulation and experimental results show improvement of tension control performance by the proposed friction compensation method.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.30-37
• /
• 2015

This research aims to develop Look Ahead position interpolation algorithm for small size CNC machine controlled by PC based controller. Look Ahead scheme can process a bundle of CNC's linear interpolation commands simultaneously, which reduces acceleration and deceleration time within single linear interpolation command. The algorithm is derived as simple analytical form which can be adapted to PC based CNC system by C language programming. The performance of the algorithm was verified by tail stock machining G codes experimentally. The average traverse speed of the CNC machine was increased by 27.5% and the total traverse time also reduced by 27.2% with the Look Ahead scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1161-1163
• /
• 1996

In this paper, a simulator is designed along with S/W package for crane controllers. Due to trolley's acceleration or deceleration, cranes inherently cause swing motion of the objects in transporting heavy objects. This swing not only deteriorates the crane handling safety but also increases the processing time. To overcome these drawbacks, the fuzzy rule-based simulator is developed with inhibitory swing at final action. The computer simulation shows that the swing at initial and final positions is removed fast with small position error. The proposed simulator can be used for handling object stablely and the study of effectiveness in unmanned operation of cranes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.274-277
• /
• 1996

Vector controlled PMAC(Permanent Magnet AC) motor, with rare-earth permanent magnet, are suitable for servo system demanding fast speed response. However, abrupt acceleration and deceleration control for fast response requires big instantaneous input power. So general PI control of PMAC motors can't be applied for limited power supply system like airplane or portable equipment because of input power fluctuation. Proposed technique to restrain instantaneous input power use variable power limit depends on airgap flux power. Stability check for proposed system is done.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.641-644
• /
• 1991

Constant slip frequency operation of linear infliction motor is essential for the stable levitation. Control scheme for the constant slip frequency with general purpose frequency inverter is proposed, Speed sensing scheme with proximitity switch for the speed feedback is also proposed. Optimal slip frequency, at which normal force is equal to 0, is selected by the experiment. This slip frequency is a comand to the controller. It shows good characteristic during acceleration and deceleration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.615-619
• /
• 1992

This paper describes the specifications of proto type linear pulse motor (LPM), the systems of driver and measurement. Also the following characteristics of this LPM is experiments -. Static thrust characteristics -. Dynamic thrust characteristics -. Normal force (attraction force ) -. Acceleration & deceleration characteristics etc. This LPM is Hybrid(HB), Transverse field machine(TFM) type single-sided flat type, 2-phase, 8-pole

• Journal of Korean Neurosurgical Society
• /
• 제41권4호
• /
• pp.272-274
• /
• 2007

Bilateral traumatic hemorrhage of the basal ganglia is an extremely rare neuropathologic entity. This report describes a 50year-old man with bilateral basal ganglia hemorrhage with occipital fracture of the skull after head trauma. The mechanism of development of traumatic hemorrhage of the basal ganglia has been not clear. But, it is presumed to be secondary to rupture of the lenticulostriate or anterior choroidal artery by shearing as a result of acceleration/deceleration forces. We briefly summarize our uncommon case and discuss its possible mechanisms.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.3-5
• /
• 2004

In order to speed up basic concept is to enhance high speed, curve limit speed, cross limit speed, acceleration/deceleration speed. It is important to optimal interface fundamental technology of vehicle, rail, electrical power, and signal system. Tilting train has advantage minimizing investment cost of infra railway system for increasing train limit speed in curve. the developed tilting train should be operated to commercial service speed 180Km/h of 200Km/h at KNR upgrade railroad. This paper proposed the basic model of system engineering for developing of TTX, tilting EMU (maximum operation speed : 180km/h) with speed-up of conventional railway system.