• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.921-929
• /
• 2005

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot spots in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권2호
• /
• pp.75-85
• /
• 2008

In this paper, we compared domestic with foreign pilot lamps installed on the instrument board or electronic modules (car audio, air-conditional system, etc.) of an automotive vehicle by an accelerated life test in order to estimate the life of domestic pilot lamps. An accelerated life test method was developed and the relation of the life and voltage stress was analyzed. The main results are as follows; i) $B_{10}$ life of pilot lamp is above 5,000 hours, vehicle travel time for 10 years. ii) the life of domestic pilot lamp is longer than that of foreign thing. iii) the life distribution of domestic pilot lamp is wider than that of foreign thing. iv) it is possible to promote import replacement of automobile pilot lamp.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권3호
• /
• pp.127-136
• /
• 2007

The accelerated life tests(ALTs) and degradation characteristics of image intensifier assembly(KIT-7) under low illuminance and high temperature were investigated. The accelerated life tests were carried out at $5{\times}10^5\;fc-40^{\circ}C,\;10{\times}10^5\;fc-40^{\circ}C,\;5{\times}10^5\;fc-50^{\circ}C,\;10{\times}10^5\;fc-50^{\circ}C$ and relationship related to illuminance and temperature was used as an accelerated life test model. An ALTA program[6] was used to calculate an acceleration factor and the test of life distribution fit, and estimate three parameters of an life test model. To sum up, MTTF 10,000 h at $5{\times}10^{-5}\;fc-40^{\circ}C$ of image intensifier assembly was certificated.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1221-1229
• /
• 2014

본 논문은 가속시험법을 이용하여 추진축의 피로 수명을 예측하는 것이다. 가속시험방법으로는 교정가속시험법을 적용하였으며, 이 시험법은 시험시료 수량이 적을 경우에 시험시간 단축과 신뢰성을 높이는 매우 효과적인 방법이다. 두 수준의 고부하 스트레스 수준에서 피로시험을 수행하고, 외삽법과 가용한 시험시간을 고려하여 저부하 스트레스 시험 수준을 결정하여 피로시험을 수행하였다. 본 논문에서는 가속지수와 형상모수 등의 신뢰성 파라미터를 시험을 수행하여 획득하였고, 실제 사용 환경의 로드 스펙트럼을 분석하고 시험 결과와 비교하여 추진축의 수명을 예측할 수 있었다.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.757-762
• /
• 2006

Reliability of automotive parts has been one of the most interesting fields in the automotive industry. Especially, a small DC motor was issued because of the increasing adoption for passengers' safety and convenience. For several years, small DC motors have been studied and some problems of a life test method were found out. The field condition was not considered enough in the old life test method. It also needed a lot of test time. For precise life estimation and accelerated life test, new life test procedure was developed based on measured field condition. The vibration condition on vehicle and latent force on fan motor shaft were measured and correlated with each other. We converted the acceleration data into the load data and calculated the equivalent load from integrated value. We found the relationship which can be used for accelerated life test without changing the severity by using different loading factors.

• Corrosion Science and Technology
• /
• 제12권5호
• /
• pp.209-214
• /
• 2013

In the industry, accelerated corrosion test is used for the life time prediction. When anti-corrosion test proceeds in real environments, it is difficult that we predict and evaluate the corrosion life time because of the long test time such as 10 years or more time. Accelerated corrosion test and Salt spray test are able to test corrosion life time of products in the laboratory instead of outdoor corrosion test. Experimental procedure is selected for the corrosion standard specimen, exposure of the specimens, measurements of the mass loss and evaluating the mass loss data. As a result, the acceleration factor of the accelerated corrosion test to the outdoor corrosion test is 414.8. Therefore we can predict the corrosion life time of carbon steel during a short time period.

• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.29-35
• /
• 2013

Butterfly valve seated rubber has been widely used in water works and industrial fields because it has advantages which are small installation area and low weight. The size and material of butterfly valve have been selected by service environments and purposes. But there are out of the ordinary to find papers for the life characteristics of the butterfly valve. So, this study carries out the accelerated life test, which has an acceleration factor with pressure, using performance and life test equipment. Accelerated model is adopted with 3 stress level and the inverse power law model to estimate the life of the test samples. After the analysis of the test result, accelerated index has 7.0 and the acceleration factor has 208 which is applied with field condition with the pressure 6.3 bar.

• International Journal of Reliability and Applications
• /
• 제1권2호
• /
• pp.155-165
• /
• 2000

In this paper, we propose some estimators of Kullback- Leibler Information functions using the data from three step stress accelerated life tests. This acceleration model is assumed to be a tampered random variable model. Some asymptotic properties of proposed estimators are proved. Simulations are performed for comparing the small sample properties of the proposed estimators under use condition of accelerated life test.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권1호
• /
• pp.47-58
• /
• 2009

In this paper, an accelerated life test procedure for a vacuum cleaner motor is proposed. We investigate the failure mechanism of the motor and select some accelerating factors and determine the orifice size as a key accelerating factor. Three stress levels of orifice size are tested and the failure data with censored data are analyzed. The modified accelerating test will reduce the test time in design phase by using the accelerating factor.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.93-96
• /
• 2014

RFID (Radio Frequency IDentification) system is recognition technology which can maintain various object's information. Reliability of RFID tags is the most important factor in RFID system. In this paper, we proposed ALT (Accelerated Life Test) method for UHF RFID tags. Temperature and humidity were adopted as stress factors and the accelerated life tests were conducted in three different conditions. We performed failure analysis for identifying failure mechanism and statistical analysis of test data. In the statistical analysis, we employed Inverse Power law for relationship between tag's life and stress. Through the statistical analysis, we proposed acceleration factor for several levels of temperature-humidity. The reliability qualification test plans were also designed for the tag's target reliability.