• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.38-43
• /
• 2022

The effect of introducing oxygen functional groups by oxygen plasma treatment of activated carbon on adsorption properties of cesium ions was investigated. During the oxygen plasma treatment, the frequency, power, and oxygen gas flow rates were fixed at 100 kHz, 80 W, and 60 sccm, respectively, while the reaction time was varied. Under the experimental conditions, the amount of cesium ion adsorption increased as the content of oxygen groups on C-O-C and O=C-O bonds increased when the reaction time with oxygen gas was 10 minutes. However, when the reaction time increased to 15 minutes, the oxygen functional group content decreased resulting in the decrease of the adsorbed cesium ion amount. On the other hand, unlike the oxygen content of the surface-treated activated carbon, the specific surface area and pore properties were hardly affected by the oxygen plasma reaction time. As a result, the oxygen plasma-treated activated carbon improved the cesium ion removal rate by up to 97.3% compared to that of the untreated activated carbon. This is considered to be due to the content of oxygen groups on C-O-C and O=C-O bonds introduced on the surface of the activated carbon through oxygen plasma treatment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.135-140
• /
• 2022

In addition to the stack that directly generates electricity by the reaction of hydrogen and oxygen, the fuel cell power generation system has a reformer that generates hydrogen from various fuels such as methanol and natural gas. It also consists of a power converter that converts the DC voltage generated in the stack into a stable AC voltage. The fuel cell output of such a system is direct current, and in order to be used at home, an inverter device that converts it into alternating current through a power converter is required. In addition, a DC-DC step-up converter is used to boost the fuel cell voltage to about 30~70V, which is the inverter operating voltage, to about 380V. The DC-DC step-up converter is a DC voltage variable device that exists between the fuel cell output and the inverter. Accordingly, since a constant output voltage of the converter is generated in response to a change in the output voltage of the fuel cell, the inverter can receive constant power regardless of the voltage change of the fuel cell. Therefore, in this paper, we discuss the detailed hardware design of the full-bridge converter, which is the main power source of the inverter that receives the fuel cell output voltage (30~70V) as an input and is applied to the grid among the members of the fuel cell power generation system.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2000.11a
• /
• pp.45-67
• /
• 2000

2-Amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) is a mutagenic and carcinogenic heterocyclic amino found in cooked meat. The in vivo mutagenicity and hepatocarcinogenicity of MeIQx were examined in mice harboring the lacZ mutation reporter gene ($Muta^{TM}$ Mice) and bitransgenic mice over-expressing the c-myc oncogene. C57B1/$\lambda$lacZ and bitransgenic c-myc (albumin promoter)/$\lambda$lacZ mice were bred and weaned onto an AIN-76 based diet containing $0.06\%$ (w/w) MeIQx or onto control diet. After 30 weeks on diet, only male bitransgenic mice on MeIQx developed hepatocellular carcinoma ($100\%$ incidence) indicating that there was synergism between c-myc over-expression and MeIQx. By 40 weeks, hepatic tumor incidence was $100\%$ ($17\%$) and $44\%$ ($0\%$) in male c-myc/$\lambda$lacZ and C57B1/$\lambda$lacZ mice given MeIQx (or control) diet, respectively, indicating that either MeIQx or c-myc over-expression alone eventually induced hepatic tumors. At either time point, mutant frequency in the lacZ gene was at least 40-fold higher in MeIQx-treated mice than in control mice of either strain. These findings suggest that MeIQx-induced hepatocarcinogenesis is associated with MeIQx-induced mutations. Elevated mutant frequency in MeIQx-treated mice also occurred concomitant with the formation of MeIQx-guanine adducts as detected by the $^{32}P$-postlabeling assay. Irrespective of strain or diet, sequence analysis of the lacZ mutants from male mouse liver showed that the principal sequence alteration was a single guanine-base substitution. Adenine mutations, however, were detected only in animals on control diet. MeIQx-fed mice harboring the c-myc oncogene showed a l.4-2.6-fold higher mutant frequency in the lacZ gene than mice not carrying the transgene. Although there was a trend toward higher adduct levels in c-myc mice, MeIQx-DNA adduct levels were not significantly different between c-myc/$\lambda$lacZ and C57B1/$\lambda$lacZ mice after 30 weeks on diet. Thus, it appeared that factors in addition to MeIQx-DNA adduct levels, such as the enhance rate of proliferation associated with c-myc over-expression, may have accounted for a higher mutant frequency in c-myc mice. In the control diet groups, the lacZ mutant frequency was significantly higher in c-myc/$\lambda$lacZ mice than in 057B1/$\lambda$1acZ mice. The findings are consistent with the notion that c-myc over-expression is associated with an increase in mutagenesis. The mechanism for the synergistic effects of c-myc over-expression on MeIQx hepatocarcinogenicity appears to involve an enhancement of MeIQx-induced mutations.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.231-248
• /
• 2019

The purpose of this study was to implement a cognitive stimulation activity program and examine its effects elderly people who is capable of daily life and community activities but suffering from per sistent cognitive decline on the elderly's cognitive function, self-efficacy, and depression. The purpose of this study was to help elderly people who is capable of daily life and community activities but suffering from persistent cognitive decline improve their ability to perform and adapt to activity-based tasks incorporating a variety of actions of different subdomains and difficulty levels, ac cording to their characteristics and cognitive levels. The aim of the program created was to systemati cally improve the subdomains of cognitive functions and eventually preventing these conditions develo ping into dementia in those affected. This study also enabled the subjects to improve their self-effica cy through newly gained positive perceptions and attitudes toward their own abilities by successfully expressing their experience or thoughts about circumstantially and relationally meaningful events and memories, and performing activities that promote sensory stimulations. The group activities conducted as part of the study helped the subjects reduce their symptoms of depression not only by expressing their thoughts and emotions, but also by encouraging empathy with, understanding of, and caring for others. Given that this study confirmed the potential of the cognitive stimulation program designed fo r it as a clinical intervention for elderly people with cognitive impairment, it is suggested as a useful preventive program for early stage dementia.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.57-64
• /
• 2007

This study proposes a method to estimate drilling torque during ground boring with an aid of electrical energy required for rotating a boring-auger. Ground boring is commonly used in geotechnical engineering such as preboring precast pile installation, soil-cement grouting, ground exploration and so forth. In order to understand the correlation between required electrical energy to rotate the boring auger and the drilling torque, a small laboratory apparatus was designed and a pilot study was performed. The apparatus rotates common drill bits of $D=5{\sim}25mm$ in CBR specimens. The velocity of a bit is 19 RPM and predefined using a reduction gear which connects a main rotation axis to a 25 Watts AC electrical motor shaft. In the middle of drilling the motor current increments and the drilling torque were measured and the correlation between the current and the torque was obtained through linear square fits. Based on the correlation the acquired motor current during drilling was applied to predict the drilling torque in consequent testing and the prediction results were compared to the measured torque. The comparison leads a conclusion that the motor current during drilling using electrical power may be a good indicator to estimate/determine strength characteristics of the ground.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.5-12
• /
• 2008

Biot proposed the frequency dependent formulation for the propagation of elastic waves in saturated media based on the coupled theory mixtures. Based on Biot theory, a special frequency called 'the characteristic frequency' contains unique information of the permeability of soils. The characteristic frequency is measured from I/Q (inverse quality factor) versus frequency curve by an acoustic sweep test, and the permeability of soils is computed from Biot equation. In this paper, laboratory tests are performed at The University of Mississippi using a large test box. The measured characteristic frequency is consistently obtained at 3500 Hz for mortar sands. The computed permeability of mortar sands based on Biot equation turned out 2.01 $10^{-4}m/sec$, while the permeability from the laboratory constant head test turned out 1.49 $10^{-4}m/sec$. This paper addresses the theoretical background and experimental procedure of this technique.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.853-861
• /
• 2018

This paper proposes the application of harmonic constraints to address the problems caused by abnormal voltage increases when electric railway vehicles are running. The AC line that supplies the train with power during operation is used to provide electricity of 25kV/60 Hz, but gradually the size and frequency of harmonics involved in the line are varied with the technological evolution of the railroad vehicle electrical equipment. An increase in heat losses due to the failure of the instrument transformer (PT), the main circuit device, which is a serious problem with the recent train safety operation, or to the main displacement voltage. When high frequency components are introduced through low frequency Transformers of the main circuit device, the high intensity of the components is caused by the high intensity of the core and the current flow of the parasitic core is increased, thus generating heat. To solve this problem, the recent adjustment of the sequence has applied artificial NOTCH OFF of the power converter. However, the method of receiving and controlling the OFF signal operates by interaction between the ground and the vehicle's devices, thus it is invalid in the event of failure, and an actual accident is occurring. Therefore, the harmonic currents were required to prevent possible flow of harmonics, and conducted a study to prevent accidental occurrence of train accidents and to verify feasibility of the device through the simulations of the train's experimental analysis and the simulations of the train for safe operation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.141-148
• /
• 2010

Electrical noises like self potential, burst noises and 60-Hz electrical noises are one of the causes to reduce reliability of electrical resistivity survey. Even the PDC-R (Pseudo DC resisitivity) technique, recently developed, is suffering from the problem of low reliability due to electrical noises. That is, both DC-based and AC-based resistivity technique is subject to reliability problem due to electrical noises embedded in urban geotechnical sites. In this research, a new technique to enhance reliability of the PDC-R technique by minimizing influence of electrical noises was proposed. In addition, an automated procedure was also proposed to facilitate data analysis and interpretation of PDC-R measurements. The proposed technique is composed of two steps: 1. to extract information only related with the input current by means of multiple-filter technique, and 2. to undertake a task to sort out signal information only to show stable and reliable characteristics. This automated procedure was verified by a synthetic harmonic wave including DC shift, burst random noises and 60-Hz electrical noises. Also the procedure was applied to site investigation at urban areas for proving its feasibility and accuracy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.114-114
• /
• 2022

There are 28 families and 166 species of exotic weeds on agricultural land and among these, 23 families and 80 species of exotic weeds occur on pastures. Among them, the Solidago altissima is a perennial weed belonging to the asteraceae family and it is an exotic weed that spreads to the surrounding area using methods such as high seed production, vegetative propagation using underground rhizomes and allelochemical. Accordingly, in 2009, the Ministry of Environment designated it as an ecosystem-disrupting species. This study was conducted to obtain basic data about the effects of S.altissima derived allelochemicals on forage crops. The root of S.altissima was separated, dried in the shade and then pulverized to prepare an root powder. Powder was repeatedly extracted with methanol for 3 days and concentrated under reduced pressure to obtain an root methanol extract. Dissolve the extract in distilled water, dispense it in a separate-funnel and proceed with liquid-liquid extraction by adding equal amounts of n-haxane (Hex), chloroform (CHCI₃), ethyl acetate (EtoAC), and butanol (BuOH) in order of increasing polarity. A seed-bioassay was performed using fractions for each solvent, followed by separation and purification by silica gel column chromatography. As a result of the fraction germination test for each solvent, the IC₅₀ values using the fresh weight of each fraction were 898.3 mg L^-1, 676.3 mg L^-1, 1160 mg L^-1 and 1360 mg L^-1. CA, CB, and CC fractions were obtained through primary silica gel column chromatography that used CHCI₃ fraction. As a result of seed-bioassay using each fraction, the IC₅₀ values for the fresh weight of each fraction was 537.3 mg L^-1, 1280 mg L^-1 and 1947 mg L^-1. Based on this, 5 fractions were obtained as a result of secondary silica gel column chromatography using the CA fraction. A seed-bioassay was performed, as a result, the lowest IC₅₀ value was calculated as 226.7 mg L^-1 in the CAE fraction. Based on this, the fraction was analyzed by GC-MS. The results of this study can be used as basic research data on the effects of weeds on forage crops and allelochemicals secreted from S. altissima.

• Korean Journal of Materials Research
• /
• v.34 no.4
• /
• pp.185-193
• /
• 2024

In this study, NASICON-type Li_1+XGa_XTi_2-X(PO₄)₃ (x = 0.1, 0.3 and 0.4) solid-state electrolytes for all-solid-state batteries were synthesized through the sol-gel method. In addition, the influence on the ion conductivity of solid-state electrolytes when partially substituted for Ti⁴⁺ (0.61Å) site to Ga³⁺ (0.62Å) of trivalent cations was investigated. The obtained precursor was heat treated at 450 ℃, and a single crystalline phase of Li_1+XGa_XTi_2-X(PO₄)₃ systems was obtained at a calcination temperature above 650 ℃. Additionally, the calcinated powders were pelletized and sintered at temperatures from 800 ℃ to 1,000 ℃ at 100 ℃ intervals. The synthesized powder and sintered bodies of Li_1+XGa_XTi_2-X(PO₄)₃ were characterized using TG-DTA, XRD, XPS and FE-SEM. The ionic conduction properties as solid-state electrolytes were investigated by AC impedance. As a result, Li_1+XGa_XTi_2-X(PO₄)₃ was successfully produced in all cases. However, a GaPO₄ impurity was formed due to the high sintering temperatures and high Ga content. The crystallinity of Li_1+XGa_XTi_2-X(PO₄)₃ increased with the sintering temperature as evidenced by FE-SEM observations, which demonstrated that the edges of the larger cube-shaped grains become sharper with increases in the sintering temperature. In samples with high sintering temperatures at 1,000 ℃ and high Ga content above 0.3, coarsening of grains occurred. This resulted in the formation of many grain boundaries, leading to low sinterability. These two factors, the impurity and grain boundary, have an enormous impact on the properties of Li_1+XGa_XTi_2-X(PO₄)₃. The Li_1.3Ga_0.3Ti_1.7(PO₄)₃ pellet sintered at 900 ℃ was denser than those sintered at other conditions, showing the highest total ion conductivity of 7.66 × 10^-5 S/cm at room temperature. The total activation energy of Li-ion transport for the Li_1.3Ga_0.3Ti_1.7(PO₄)₃ solid-state electrolyte was estimated to be as low as 0.36 eV. Although the Li_1+XGa_XTi_2-X(PO₄)₃ sintered at 1,000 ℃ had a relatively high apparent density, it had less total ionic conductivity due to an increase in the grain-boundary resistance with coarse grains.