• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.338-342
• /
• 1999

We simulated the current limiting characteristics of resistive and inductive SFCLs with 100 ${\omega}$ of impedances for a single and double line-to-ground faults in the 154 kV grid between two substations nearby Seoul. The transient current at the faults includes not. only high AC current up to 44 kA but also significant DC component as high as 4 kA. The DC current is greater and lasts longer for the double line-to-ground fault than for the single line-to-ground fault. The inductive SFCL limited the fault current more effectively than the resistive one. The DC component, however, was greater and diminishes slower for the inductive SFCL than for the resistive one.

• Progress in Superconductivity
• /
• v.12 no.2
• /
• pp.118-123
• /
• 2011

The properties of $2^{nd}$ generation high temperature superconducting wire, coated conductor strongly depend on the quality of superconducting oxide layer and property of metal substrate is one of the most important factors affecting the quality of coated conductor. Good mechanical and chemical stability at high temperature are required to maintain the initial integrity during the various process steps required to deposit several layers consisting coated conductor. And substrate need to be nonmagnetic to reduce magnetization loss for ac application. Hastelloy and stainless steel are the most suitable alloys for metal substrate. One of the obstacles in using stainless steel as substrate for coated conductor is its difficulties in making smooth surface inevitable for depositing good IBAD layer. Conventional method involves several steps such as electro polishing, deposition of $Al_2O_3$ and $Y_2O_3$ before IBAD process. Chemical solution deposition method can simplify those steps into one step process having uniformity in large area. In this research, we tried to improve the surface roughness of stainless steel(SUS310). The precursor coating solution was synthesized by using yttrium complex. The viscosity of coating solution and heat treatment condition were optimized for smooth surface. A smooth amorphous $Y_2O_3$ thin film suitable for IBAD process was coated on SUS310 tape. The surface roughness was improved from 40nm to 1.8 nm by 4 coatings. The IBAD-MgO layer deposited on prepared substrate showed good in plane alignment(${\Delta}{\phi}$) of $6.2^{\circ}$.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.171-177
• /
• 2008

This work intends to investigate the effects of pedaling directions on the muscle actions during the bicycle's uphill propulsion. A test rig was developed that consists of a bicyle with a special planetary geartrain, a height-adjustable treadmill, a rear-wheel support and a magnetic brake. A three-dimensional motion analysis was performed for measuring kinematic characteristics of the forward backward pedaling and the electromygraphy(EMG) measurements were simultaneously performed for estimating the muscle actions of the leg. In this work, four muscles are considered including Gastrocnemius muscle(GM), Vastus lateralis(VL), Tibialis anterior(TA) and Soleus(SOL) while the uphill slope is varied from $0^{\circ}$ to $6^{\circ}$. Raw EMG signals were first processed through the root-mean-square(RMS) averaging and then ensemble curves were derived by averaging the EMG RMS envelopes over 50 consecutive cycles. Results show that both the kinemactic characteristics and the muscle actions are significantly affected by the pedaling direction. The crank speed of the forward pedaling is higher but the difference in speed is reduced as the slope is increased. The ensemble curves of the :ac signals clearly exhibit some differences in their patterns, peak values and the corresponding locations with respect to the crank angle. The peak values of most EMG signals are higher for the forward pedaling regardless of the slope magnitude. However, the averages of the EMG signals are not observed to have a similar relationship with the pedaling direction, which seems to be affected by several factors such as less experience of the participants' backward pedaling. inappropriate bicycle design for the backward pedaling. These limitations will be further considered in future work.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.259-265
• /
• 2006

We measured sputtering yield of RF $O_2-plasma$ treated MgO protective layer for AC-PDP(plasma display panel) using a Focused ion Beam System(FIB). A 10 kV acceleration voltage was applied. The sputtering yield of the untreated sample and the treated sample were 0.33 atoms/ion and 0.20 atoms/ion, respectively. The influence of the plasma-treatment of MgO thin film was characterized by XPS and AFM analysis. We observed that the binding energy of the O 1s spectra, the FWHM of O 1s spectra and the RMS(root-mean-square) of surface roughness decreased to 2.36 eV, 0.6167 eV and 0.32 nm, respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.3
• /
• pp.233-239
• /
• 1995

The effects of media, growth regulators, low-temperature treatments, culture temperature and light were investigated to improve the callus induction and growth in the anther culture of Comus officinalis Sieb. et Zucco. The frequency of callus induction was more effective on WPM medium than MS medium, and it was highest as 54% in WPM medium supplemented with Img/L NAA. Callus growth was stimulated on MS medium supplemented with 2mg/L NAA. Effect of temperature and light on the callus induction and growth was highest as 62% in the treatment for 16/8 hrs. (light/dark) at $25^{\circ}C$ Ef­fect of low - temperature treatment on callus induction was highest as 19. 5% in the treatment for 36 hrs. at $4^{\circ}C$. For organization, green cells and rootings were promoted on MS medium supplemented with O. 5mg/L 2,4-D and 1 mg/L kinetin. The prevention of callus browning was effective on the medium con­taining $3{\sim}5mg/L$ ABA or 5mg/L $AgNO_3$. The supplement of ABA or $AgNO_3$,were maintained callus ac­tivity for 4-5 weeks and they were promoted the development of green cells.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.45-52
• /
• 2006

In this paper, authors propose a step-up converter of pulse width modulation (PWM) and power factor correction (PFC) by using a novel loss-less snubber. The proposed converter for a discontinuous conduction mode (DCM) eliminates the complicated circuit control requirement and reduces the size of components. The input current waveform in the proposed converter is got to be a sinusoidal form of discontinuous pulse in proportion to magnitude of ac input voltage under the constant duty cycle switching. Thereupon, the input power factor is nearly unity and the control method is simple. In the general DCM converters, the switching devices are fumed-on with the zero current switching (ZCS), and the switching devices must be switched-off at a maximum reactor current. To achieve a soft switching (ZCS and ZVS) of the switching turn-off, the proposed converter is constructed by using a new loss-less snubber which is operated with a partial resonant circuit. The result is that the switching loss is very low and the efficiency of converter is high. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.3877-3880
• /
• 2016

Nausea and vomiting are among the most serious side effects of chemotherapy, in some cases leading to treatment interruption or chemotherapy dose reduction. Ginger has long been known as an antiemetic drug, used for conditions such as motion sickness, nausea-vomiting in pregnancy, and post-operation side effects. One hundred and fifty female patients with breast cancer entered this prospective study and were randomized to receive ginger (500 mg ginger powder, twice a day for 3 days) or placebo. One hundred and nineteen patients completed the study: 57 of them received ginger and 62 received ginger for the first 3 chemotherapy cycles. Mean age in all patients was 48.6 (25-79) years. After 1st chemotherapy, mean nausea in the ginger and control arms were 1.36 (${\pm}1.31$) and 1.46 (${\pm}1.28$) with no statistically significant difference. After the $2^{nd}$ chemotherapy session, nausea score was slightly more in the ginger group (1.36 versus 1.32). After $3^{rd}$ chemotherapy, mean nausea severity in control group was less than ginger group [1.37 (${\pm}1.14$), versus 1.42 (${\pm}1.30$)]. Considering all patients, nausea was slightly more severe in ginger arm. In ginger arm mean nausea score was 1.42 (${\pm}0.96$) and in control arm it was 1.40 (${\pm}0.92$). Mean vomiting scores after chemotherapy in ginger arm were 0.719 (${\pm}1.03$), 0.68 (${\pm}1.00$) and 0.77 (${\pm}1.18$). In control arm, mean vomiting was 0.983 (${\pm}1.23$), 1.03 (${\pm}1.22$) and 1.15 (${\pm}1.27$). In all sessions, ginger decreased vomiting severity from 1.4 (${\pm}1.04$) to 0.71 (${\pm}0.86$). None of the differences were significant. In those patients who received the AC regimen, vomiting was less severe ($0.64{\pm}0.87$) comparing to those who received placebo ($1.13{\pm}1.12$), which was statistically significant (p-Value <0.05). Further and larger studies are needed to draw conclusions.

• Journal of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.202-209
• /
• 1974

Polarographic behaviors of copper and cadmium complexes with 2,2'-bipyridine and ethylenediamine in acetonitrile have been investigated by the DC and AC polarography. The reduction processes are estimated as follows; $Cu(II)-bipy. \;complex\;{\longrightarrow^{e^-}_{E_{1/2}\risingdotseq+0.1V}}\;Cu(I)-bipy.\;complex\;{\longrightarrow^{e^-}_{E_{1/2}=-0.43V}}\;Cu(Hg)$$Cu(II)-en.\;complex\;{\longrightarrow^{e^-}}\;Cu(I)-en.\;complex\;{times}\;{\longrightarrow^{e^-}_{E_{1/2}=-0.56V}}\;Cu(Hg)$$Cu(II)-bipy. \;complex\;{\longrightarrow^{e^-}_{E_{1/2}=-0.57V}}\;Cu(I)-bipy.\;complex\;{\longrightarrow^{2e^-}_{E_{1/2}=-0.97V}}\;Cd(I)-bipy\;complex$$Cu(II)-en.\;complex\;{\longrightarrow^{e^-}_{E_{1/2}=+0.05V}\;Cu(I)-en.\;complex{\longrightarrow^{e^-}_{E_{1/2}=-0.92V}}\;Cu(Hg)$ The limiting currents of all steps are controlled by diffusion. The number of ligand and the dissociation constant for Cu(Ⅰ)-bipy. complex were found to be n = 2 and $K_d=(1.5{\pm}0.1){\times}10^{-7}$, respectively.

• Korean Journal of Agricultural Science
• /
• v.3 no.2
• /
• pp.170-176
• /
• 1976

In order to analyze the composition of fatty acid in the seed oil. and amino acid in the seed protein of wild thornless chinese pepper tree; Zanthoxylum schinifolum var. inermis Nakai. GLC method and amino acid autoanalyzer were applied. respectively. while the general composition of the seed and physico-chemical properties of the seed oil were also determined by A. O. A. C. method. The results obtained were summarized as follow The content of oil, protein and ashes were 47.05%, 20.14% and 3.1%, respectively. The content of sulfur and cyan compound in the seed were 0.02% and 0.00005%, respectively, which were far below than allowed guantity by food regulation. Therefore, it is considered to be safe for edible purpose. The iodine absorption number obtained was 145.2, which might be belonged to drying oil. The physico-chemical properties of the seed oil such as acid value, saponification number and refractive index showed the characteristics of an unsaturated high molecular fatty acid compound. The seed oil was composed of 34.8% of oleic acid, 25.1% of linoleic acid and 26.1% of linolenic acid, which accounts for more than 80% of essential fatty acid. Therefore, it could be used as an edible oil. Seventeen kinds of amino acids were anayzed from seed protein. Among them comparatively high content of threonine, valine, methionine, isoleucine, leucine and phenylalanine were observed. As a non-essential amino acid, glutamic acid was found as high as 4.985%. From these results the seed of thornless Chinese pepper would be good for oil and protein source.