• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.446-451
• /
• 2007

Physicochemical properties of carbon nanofibers were evaluated as a supercacitor electrode materials could store electrochemical energy reversibly. A capacitance of carbon nanofiber electrode was increased gradually, depending on the PVDF binder ratio. A feasibility of EDLC electrode was estimated with specific surface area measurement by BET method and mesopore structure of carbon nanofiber surface could be explained electrochemical absorption-desorption in aqueous electrolyte. PVDF 5 wt.% ratio in electrode was observed a suitable binder amount by CV result.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.171-175
• /
• 1999

진공 증착 방법으로 제작한 Pd박막(두께 $180{\sim}670{\AA}$)에 상온에서 수소기체를 흡수-방출시킬 때의 전기저항값의 변화를 측정하였다. 저항값 변화의 최대값은 시료의 두께에 따라서 달라졌다. $({\Delta}R_{\infty}/R_0)_{{\beta}min}$ 값은 $\670{\AA}$ 시료는 0.61이었으며, $\180{\AA}$ 시료는 0.34 이었다. 같은 두께의 시료일 경우 시료의 제작 조건에 따라 저항값의 변화는 다른 경향을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.413-416
• /
• 2007

The adsorption and surface reactions of NO on a VO/V(110) surface have been investigated using X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure, and temperature programmed desorption (TPD) technique. NO is molecularly adsorbed on VO/V(110) at 80 K. As the surface coverage of NO increases, the NO dimer is formed on the surface at 80 K. Both NO and (NO)2 are adsorbed on the surface with the N-O bond perpendicular to the surface. (NO)2 decomposes at ~100 K and the reaction product is desorbed as N2O. Decomposition of NO takes place when the surface temperature is higher than 273 K.

• 한국수소및신에너지학회논문집
• /
• 제15권2호
• /
• pp.144-151
• /
• 2004

The effect of the cobalt content on the thermodynamic and, heat and mass transfer properties of the $MmNi_{5-y}B_{y-z}C_z(y=0.5{\sim}1.5,\;z=0.5)$hydrogen storage alloys has been studied systematically. The P-C isotherms curves show that with increasing cobalt content in the alloys, the plateau pressure of the hydrogen absorption and desorption and enthalpy(${\Delta}H$) increases steeply and the plateau region becomes flat, while entropy(${\Delta}S$) decreases. Also at the constant cobalt content the hydrogen transfer rate decreases with the reaction temperature, while the initial reaction kinetics increases. But the initial reaction with hydrogen completes within 1min, although the reaction proceeds about 30minutes thereafter.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.279-286
• /
• 2008

Numerical analysis is done to investigate which would be the most influencing process parameter in determining the uniformity of deposition thickness in TiN ICP-CVD(inductively coupled plasma chemical vapor deposition). Two configurations of ICP antenna are modeled; side and top planar. Side and top gas inlets are considered with each ICP antenna geometries. Precursor for TiN deposition was TDMAT(Tetrakis Diethyl Methyl Amido Titanium). Two step volume dissociation of TDMAT is used and absorption, desorption and deposition surface reactions are included. Most influencing factors are H and N concentration dissociated by electron impact collisions in plasma volume which depends on the relative positions of gas inlet and ICP antenna generated hot plasma region. Low surface recombination of N shows hollow type concentration, but H gives a bell type distribution. Film thickness at substrate edges is sensitive to gas flow rate and at high pressures getting more dependent on flow characteristics.

• 환경위생공학
• /
• 제16권1호
• /
• pp.61-65
• /
• 2001

To review mass transfer trays from a process of view, the dependence of efficiency in loading ranges and maximum loadings with an acceptable efficiency of traditional tray have to be known. It is reported about the performance of the metallic Dualflex, relatively new high performance packing. Absorption, desorption and rectification tests as well as pressure drop and maximum capacity are concerned, indicate the superiority of the Dualflex over the general packing of comparable, main process. The process engineering characteristics show that Dualflex can be applied for all mass transfer precesses and it is to be recommended especially for those high capacity separations which requite allow low pressure drop because of the thermal sensibility of the product or because of the need of energy saving.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.6-12
• /
• 2005

Fiber surface morphologies and associated internal structures are closely related to its properties. Unlike other fibers including cotton, bast fibers possess transverse nodes and fissures in cross-sectional and longitudinal directions. Their morphologies and associated internal structures were anatomically examined under the scanning electron microscope. The results showed that the morphologies of the nodes and the fissures of bast fibers varied depending on the construction of the inner fibril cellular layers. The transverse nodes and fissures were formed by the folding and spiralling of the cellular layers during plant growth. The dimensions of nodes and fissures were determined by the dislocations of the cellular layers. There were also many longitudinal fissures in bast fibers. Some deep longitudinal fissures even opened the fiber lumen for a short way along the fiber. In addition, the lumen channel of the bast fibers could be disturbed or disrupted by the nodes and the spi­rals of the internal cellular layers. The existence of the transverse nodes and fissures in the bast fibers could degrade the fiber mechanical properties, whereas the longitudinal fissures may contribute to the very rapid moisture absorption and desorption.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.268-268
• /
• 2013

Water molecules on a Ru(0001) surface are anomalously acidic compared to bulk water. The observation was made by conducting reactive ion scattering, reflection absorption infrared spectroscopy, and temperature-programmed desorption measurements for the adsorption of ammonia onto a water layer formed on Ru(0001). The study shows that the water molecules in the first intact $H_2O$ bilayer spontaneously release a proton to NH3 adsorbates to produce $NH_4{^+}$. However, such proton transfer does not occur for $H_2O$, OH, and H in a mixed adsorption layer or for $H_2O$ in a thick ice film surface.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.36-37
• /
• 1994

Sirkar등[1]이 많이 연구한 hollow-fiber contained liquid membrane방식보다 막내부에서의 물질전달 저항을 크게 낮출 수 있는 이른바 flowing liquid membrane방법을 Teramoto등[2]은 제안하였다. 좀더 발전된 membrane absorber방식으로서 평판형(flat-sheet type)막으로 흡수(absorption) 및 탈착(desorption)모듈을 구성하고, monoethanolamine 흡수제(absorbent)로 $Co_2/CH_4$ 분리에 적용하여 선택도를 크게 향상시킨 기존의 실험결과도 볼 수 있다. 막에서의 기-후 접촉과 반응이 수반된 물질전달에 의한 기체흡수 현상에 관해 많은 이론해석과 실험결과가 연구된 바 있다. 본 연구에서는 이산화탄소와 같은 산성기체(acid gas)의 분리에 주로 적용될 새로운 방식의 순환식 중공사막 흡수기 (circulatory hollow-fiber membrane absorber: HFMA)를 제안하고 이의 실제적용에 대한 기초로서 모델해석에 의한 분리성능을 예측하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.39-40
• /
• 2017

This study aims to evaluate the humidity control performance of low-priced generic ceramic panels that are used to control humidity. Temperature and humidity are monitored by using 'Living Lab' and the change of indoor relative humidity is measured and analyzed. According to the results of the study, the indoor relative humidity of rooms installed with ceramic panels was found to be low compared to that of living rooms by 2.2%RH (test period) and 3.2%RH (daily). In the case of maximum relative humidity, rooms installed with ceramic panels were found to be low by 6.9%RH. The results are attributable to the humidity absorption of ceramic panels. Accordingly, future ceramic panels need the improvement of performance and an appropriate construction area should be derived depending on indoor space.