• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.925-928
• /
• 2010

Nitrogen-doped $TiO_2$ ($TiO_2$:N) nano-particles with a pure anatase crystalline structure were successfully synthesized through the hydrolysis of $TiCl_4$ in an ammonia aqueous solution. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), $N_2$-sorption, and UV-vis diffuse reflectance spectra (UV-vis DRS) techniques. The absorption edge of nitrogen-doped $TiO_2$ shifted into the visible wavelength region. The photoelectrochemical (PEC) performances were investigated for the $TiO_2$ mesoporous electrodes doped with different nitrogen concentrations. The $TiO_2$:N electrodes exhibited much higher PEC responses compared to the pure $TiO_2$ electrode because of the significantly enhanced visible-photoresponsibility of the $TiO_2$:N electrodes.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.411-417
• /
• 2005

$Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.166-173
• /
• 2009

The natural dyeing of silk fabrics with Rumex crispus L. root extract was investigated. The dyeability of Rumex crispus L. root extract was evaluated with condition of concentration, temperature, time, repeat-numbers, pH, mordants variables, methods of mordanting, color fastness and antibacterial activity, etc. The wavelength of maximum absorption of the Rumex crispus L. distilled water extract appears at 274 nm and 336 nm, methanol extract was 274 nm and 356 nm. Optical dyeing temperature of silk fabrics was $70^{\circ}C$. The K/S values of the dyed fabrics were increased with increasing dyeing time. Surface colors of dyed fabrics were various by the used mordants; RP-YR-Y range. The color fastness was improved by adding mordants were added except Sn. Dyed silk fabrics with mordants showed antibacterial activity.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.33-43
• /
• 2000

Up-conversion of rare-earth element added glass is promising area for short wavelength laser source by utilizing high power semiconductor infra-red laser if the efficiency can be increased by proper method. In this study, relatively low phonon energy fluoride glasses were prepared by co-doping rare-earth elements to realize the high efficiency up-convertor. The physical, chemical, andoptical properties of co-doped fluoride glasses were measured. 10 combinations of 5 different rare-earth fluoride elements doped samples were prepared and their transition temperatures, chemical durability, density, hardness, refractive index, absorption, fluorescence, and fluorescence lifetime were measured. 480nm wavelengths blue up-conversion was found in the Yb3+/Tm3+ co-doped glass sample with 800nm laser source and the optimum composition for the most efficient blue up-conversion was found from the glass sample with 0.3 mol% TmF3 and 1 mol% YbF3.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.146-149
• /
• 2015

Silicate glasses with different $Nd_2O_3$ concentrations were prepared through conventional melt-quenching methods while PbS quantum dots (QDs) were precipitated through heat treatment. The peak wavelengths of absorption and the photoluminescence of PbS QDs shifted to the short-wavelength side as the concentration of $Nd_2O_3$ increased. The electron energy loss spectroscopy (EELS) indicated that $Nd^{3+}$ ions were preferentially distributed inside the PbS QDs instead of the glass matrix. In addition, there was no significant change in the lifetimes of the $Nd^{3+}:^4F_{3/2}$ fluorescence between the as-prepared glass ($607{\mu}s$) and the heat-treated glass($576{\mu}s$). $Nd^{3+}$ ions were surrounded by oxygen instead of sulfur and the Nd-O clusters probably acted as nucleating centers for the formation of PbS QDs inside the glasses.

• Journal of Powder Materials
• /
• v.19 no.1
• /
• pp.55-59
• /
• 2012

In this work, the silver nanoparticles have been synthesized by electrical explosion of wire in three liquid mediums: deionized water (DIW), polyvinylpyrrolidone (PVP) and sodium dodecyl benzene sulfonate (SDBS) solutions. Absorption in the UV-visible region of these suspensions was measured in the range of 300-800 nm. A surface plasmon peak was observed at ~400 nm in all suspensions in measured wavelength range. Particle size was analyzed by transmission electron microscope. It showed that the particles had nearly spherical shape in all samples. The average particle sizes prepared in DIW, PVP and SDBS solution were 37, 31 and 27 nm, respectively. Stability of the suspensions was estimated by multiple light scattering method. The presence of PVP and SDBS surfactants in the exploding medium resulted in enhanced stability of the silver suspensions.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.1-9
• /
• 1997

Four aminoazobenzene disperse dyes derived from different N-ethyl-N-substitutedalkylanilines and 2-chloro-4-nitroaniline, were synthesized and their chemical structure were analyzed by 500 MHz NMR spectroscopy. The wavelength of maximum absorption of the synthesized dyes, which was dependent on the electron withdrawing ability of the substituent, was in the range of 499.5~526.0nm. As terminal substituent became polar, the dyeing rate of disperse dye increased, and the exhaustion rate of dyes having cyano or hydroxy group became lower, that of the dye having acetoxy group higher. The wash fastness of polyester fabric dyed with disperse dyes possessing the polar group improved probably due to the increased dye-fiber interaction.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.165-171
• /
• 2013

A new monoazo violet dye optimized for polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers was synthesized and its dyeability was investigated. Two hexyl groups were introduced to coupler, 2,5-dimethoxyaniline, in order to increase hydrophobicity of the dye. The maximum absorption wavelength was appeared at 580nm, which meant that the dye showed violet color. From the dyeing results at various conditions, the optimum dyeing was determined as $130^{\circ}C$ for 1 hour with 5% owf of dyes. The good fastness ratings to washing, rubbing were obtained showing at least 4 for both fibers. Light fastness was acceptable for polypropylene fibers giving ratings 3~4. However, relatively poor light fastness was obtained in case of ultra high molecular weight polyethylene fibers showing ratings 2.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.245-250
• /
• 2004

An analytical method was developed to determine monocrotophos residues in apple, citrus, and soil using high-performance liquid chromatography (HPLC) with ultraviolet absorption detection. Monocrotophos was extracted with acetone from apple, citrus and moist soil samples. The extract was concentrated, added with saline water, and subjected to n-hexane washing to remove nonpolar co-extractives. Dichloromethane partition was then followed to recover monocrotophos from the aqueous phase. Silica gel column chromatography was employed to further purify the extract prior to HPLC determination. Reverse-phase HPLC using an oct-adecylsilyl column was successfully applied to separate and quantitate the monocrotophos residue in sample extracts at the wavelength of 230 nm. Overall recoveries of monocrotophos from fortified samples averaged $95.3{\pm}2.1%$ (n=6), $970{\pm}0.7%$ (n=6), and $92.8{\pm}4.3%$ (n=12) for apple, citrus, and soil, respectively. The proposed method was quite reproducible and sensitive enough to replace the troublesome gas-liquid chromatographic analysis for monocrotophos residues.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.622-627
• /
• 2014

A method to reduce the specific absorption rate(SAR) of the antenna for WiMAX mobile communication is proposed in this paper. The SAR reduction is achieved by miniaturizing the physical size of the antenna for the given resonance frequency by devising a metamaterial-composite right- and left-handed(CRLH) configuration-based radiator much smaller than the quarter-guided wavelength adopted a lot in the conventional planar inverted F antenna(PIFA) or modified monopole antenna. The proposed antenna is placed near the head-phantom and its SAR is evaluated by the full-wave simulations(SEMCAD X), where the metamaterial-inspired antenna is shown to have the lower value than a modified monopole as the reference in terms of the SAR.