• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.133-138
• /
• 2001

We studied the optical properties of poly(3-hexylthiophene) for applying to the emitting material of organic electro luminescent device. The infrared spectrum and NMR of synthesized polymer gave good evidence for the conjugation of 3-hexylthiophene monomer unit. We confirmed that poly(3-hexylthiophene) contains the HT(head-to-tail)-HT(head-to-Tail) linkage larger than 65% based on NMR analysis. FTIR and raman spectroscopy show that poly(3-hexylthiophene) has two main vibration levels which have an energy about 0.18eV and 0.36eV. Electronic absorption spectra shifted to the shorter wavelength with increasing temperature, which is related to a conformational transition of the polymer. Photoluminescence spectrum generated at low temperature(10K) is separated at 669nm, 733nm and 812nm that it's because of phonon energy generated from the lattice vibration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.98-104
• /
• 2004

Early development and metamorphosis of the ascidian (Halocynthia hilgendorfi ritteri) were investigated from fertilized egg. The samples were collected in the coastal waters of Yongdam, northwest of Jeju Island in November 2002. H. hilgendorfi ritteri was solitary ascidian and produced spheral eggs with egg size ranging from $0.33\pm0.01\;mm.$ On the outer surface of the vitelline coat are attached many follicle cells. At $21.0\pm0.5^{\circ}C$ of water temperature, first cleavage took place in about 1.5 hrs after fertilization, and gastrulation followed in about 12.5 hrs. The formation of tailbud embryos and free swimming larvae were observed 13.3 hrs and 20.5 hrs after fertilization, respectively. The size of newly hatched tadpole larva was 1.30-1.45 mm, the larva swam for 2 hrs to 14 hrs. At 4 hrs after hatching, the palpi were lost and tail absorption began with an abrupt rupture of the anterior end of the notochord. At 17-18 hrs after hatching, tail completely absorption and remained trunk. The coniform adhesive papilla began protrusion at 30 hrs after hatching. The oral and atrial siphon formed at 6-7 days after settlement. At 17-18 days after settlement, metamorphosed the larvae developed into protoascidian of which the external morphology was similar to their adult.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.1
• /
• pp.75-85
• /
• 2010

The focus of this study is to evaluate the field applicability of the newly developed inorganic thixotropic-grout in various ways. In order to do this, the volume stability and the permeability of the inorganic thixotropic-grout have been measured and compared to the existing silica type grouts. In addition, the filling capability of the grout into the tail void has been evaluated through both an experiment with a miniature tail-void filling equipment and a test filling at the shield TBM construction site. The volume loss of the inorganic thixotropic-grout after a 14 day-curing under the atmosphere condition was appeared to be minimal. The excellent waterproofing ability of the inorganic thixotropic-grout was confirmed through a permeability test. The toxicity of the inorganic thixotropic-grout has been evaluated through a toxicity test of aquatic fishes (KS M 0111) and the pH value of the liquid eluviated from inorganic thixotropic-grout was measured as an average of 8.0 and a fatality rate of goldfish after 96 hours was 10% or so. The existence of harmful heavy metals in the liquid eluviated from the inorganic thixotropic-grout has been also examined through an atomic absorption spectroscopy (AAS) test. Any of harmful heavy metals were not detected and the detected level of $Cr^{6+}$ and Cd was far below the standard. Based on both an experiment with a miniature tail-void filling equipment and a test filling at the shield TBM construction site, the filling ability of inorganic thixotropic-grout into the tail void was proved to be excellent.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.168-174
• /
• 2000

A diode laser sensor system based on absorption spectroscopy techniques has been developed to measure $CO_2$ concentration and temperature non-intrusively in high temperature combustion environments using a 2.0 ${\mu}m$ DFB(Distributed Feedback) laser. Two optics was fabricated in pig-tail fashion and all optical components were implemented in a single box. The evolution of measurement sensitivity was done using test cell by changing sweep frequency and $CO_2$ concentration. Gas temperature was determined from the ratio of integrated line strengths. Species concentration was determined from the integrated line intensity and the measured temperature. The result show that the system has 2% error in wide operation frequency range and accuracy of $CO_2$ concentration was about 3%. The system was applied to measure temperature and concentration in the combustion region of a premixed $CH_4$ +air triangular flame. The measurement results of gas temperature agreed well with thermocouple results. Many considerations were taken into account to reduce optical noise, etalon effect, beam steering and base line matching problem. The evaluations results and actual combustion measurement demonstrate the practical and applicability for in-situ and real time combustion monitoring in a practical system.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.100-106
• /
• 1994

A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.235-240
• /
• 2010

The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, energy absorbing members should be absorbed with collision energy sufficiently. But vehicle structure must be light weight for the environmentally-friendly aspect, in order to improve fuel efficiency and to reduce tail gas emission. Therefore, the light weight of vehicle must be achieved in a status of securing safety of crash. An aluminum or CFRP (Carbon Fiber Reinforced Plastics) is representative one among the light-weight materials. In this study, impact collapse behavior of circular hybrid thin-walled member is evaluated. The hybrid members are manufactured by wrapping CFRP prepreg sheets outside the aluminum circular members in the autoclave. Because the CFRP is an anisotropic material whose mechanical properties change with its stacking condition, special attention is given to the effects of the stacking condition on the collapse behavior evaluation of the hybrid thin-walled member. Collapse mode and energy absorption capability of the hybrid thin-walled member are analyzed with change of the fiber orientation angle and interface number.

• Progress in Superconductivity
• /
• v.14 no.2
• /
• pp.99-101
• /
• 2012

Fluorescent yield X-ray absorption fine structure (XAFS) spectroscopy is useful for analyzing local structure of specific elements in matrices. We developed an XAFS apparatus with a 100-pixel superconducting tunnel junction (STJ) detector array with a high sensitivity and a high resolution for light-element dopants in wide-gap semiconductors. An STJ detector has a pixel size of $100{\mu}m$ square, and an asymmetric layer structure of Nb(300 nm)-Al(70 nm)/AlOx/Al(70 nm)-Nb(50 nm). The 100-pixel STJ array has an effective area of $1mm^2$. The XAFS apparatus with the STJ array detector was installed in BL-11A of High Energy Accelerator Research Organization, Photon Factory (KEK PF). Fluorescent X-ray spectrum for boron nitride showed that the average energy resolution of the 100-pixels is 12 eV in full width half maximum for the N-K line, and The C-K and N-K lines are separated without peak tail overlap. We analyzed the N dopant atoms implanted into 4H-SiC substrates at a dose of 300 ppm in a 200 nm-thick surface layer. From a comparison between measured X-ray Absorption Near Edge Structure (XANES) spectra and ab initio FEFF calculations, it has been revealed that the N atoms substitute for the C site of the SiC lattice.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.322-324
• /
• 2004

Poly(1-dodecyl-2,5-pyrrylene vinylene) (PDPV) has an extended 1t-conjugated structure and exhibits characteristic spectroscopic features. The PDPV we prepared has an absorption maximum at 510nm and its long absorption tail at ca. 750nm in methylene chloride is due to the long 1t-conjugated system connected to vinyl group. The large red-shift of emission was 625nm upon excitation at 480nm, which suggests the existence of a low emissive state. The emission of PDPV in less-polar solvents decreased markedly relative to that in the more-polar solvents; this observation was ascribed possibly to quenching by a strong vibrational mode of the dodecyl groups of PDPV in less-polar solvents. Furthermore, the emission from the high-energy side had a single decay component (0.1㎱, 49.96%), while that from the low-energy side had two components (0.6㎱, 27.1 %; 2.7㎱, 22.87%). We characterized the redox properties of PDPV by cyclic voltammetry. Every redox peak showed irreversible behavior; the oxidation peaks appeared at 1.7,0.8, and 0.6V and the reduction peak at -0.5V.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.5
• /
• pp.385-393
• /
• 2001

We have developed a Differential Absortion LIDAR (DIAL) method for the measurement of lower tropospheric ozone concentration. We used two laser beams from quadrupled Nd:YAG (266 nm) for the resonance wavelength and dye lasers (299.5 nm) for non -resonance wavelength. Aerosol extinction coefficients in the lower troposphere was computed by both Klett and Slope methods. To correct the SIN (Signal -Induced Noise) effect caused by photo detector, we subtracted a new-fitted baseline on the background part of a LIDAR signal, after the subtraction of the DC level. This is because SIN can be treated as an exponentially decaying tail. Using theme results, ozone profiles were obtained approximately 2km at daytime and 3km at nighttime. We compared the results derided by the Slope method with those measured by UV spectrometer. The computed results are in mostly good agreement with experimental results. In the measurement of the vertical layer, we observed the variation of the ozone profiles around the top mixed layer.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.143-144
• /
• 2007

낮은 포논 에너지를 가지는 대표적인 비정질 광소재인 Ge-Ga-Sb-Se 조성의 셀레나이드 유리에 CsI를 첨가한 찰코할라이드 유리 샘플을 제작하고 CsI 함량에 따른 소재의 광 특성 및 첨가된 $Pr^{3+}$ 이온의 광 특성 변화를 조사하였다. 안정한 비정질 상태를 유지하는 CsI의 함량은 약 7.5 몰%로 제한되었으며, 첨가량에 비례하여 단파장 흡수단 파장이 짧아지는 경향을 보였으나 weak absorption tail이 증가 하였다. $Pr^{3+}$ 이온으로부터 발생하는 1.6 ${\mu}m$대역 형광의 제반특성은 CsI의 첨가와 비교적 무관한 것으로 밝혀졌으며 1.06 ${\mu}m$장에서 측정한 비선형 흡수 계수 역시 CsI의 첨가에 영향을 거의 받지 않는 것으로 판명되었다.