• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.344-350
• /
• 2006

Soaking and drying were studied for seven grains and legumes including glutinous rice, brown rice, glutinous brown rice, glutinous barley, Seoritae, Heuktae and red bean to improve taste of cooked mixed grams and make easy to cook then Seoritae and Heuktae showed the highest water absorption and the rest were in the order of glutinous barley, glutinous rice, milled rice, brown glutinous rice, brown rice, and red bean. In regards with water absorption index by soaking temperature, the higher the temperature showed, the more water absorption and the shorter time to reach the water absorption balance, the more grinding legumes. showed the more water absorption and the shorter time to reach to the water absorption balance. The soaked samples were dried at mom temperature $30^{\circ}\C,\;50^{\circ}\C$, and microwave 300 W, 700 W and 1000 W power. As a result 700 W drying method br microwave can dry samples in the shortest time without damage to the samples. Therefore, it was considered as the best pretreatment conditions for mixed stains to dry with 700 W microwave after one-hour soaking at $30^{\circ}C$.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.140-145
• /
• 2002

We measured the absorption rate of a Nd:YVO$_4$crystal with a thickness of 1 mm and the output power characteristics of a cw Nd:YVO$_4$/KTP laser with respect to the change of wavelength and the polarizations of a tunable Ti:sapphire pump laser with a linewidth of 0.2 nm. In the case of S-polarization (E┴$\pi$) and P-polarization (E∥$\pi$) of a pump laser, the maximum absorption rate of the crystal was 82% at 809.4 nm and 98% at 808.8 nm, and slope efficiencies for the output power of the Nd:YVO$_4$laser (1064 nm) were 43% and 52%, respectively. The maximum Nd:YYO$_4$laser output power of 516 mW was obtained from the P-polarization pump laser of 1000 mW. As a result of an intracavity frequency-doubling, slope efficiency for the output power of the Nd:YVO$_4$/KTP green laker (532nm) was 23% and the maximum output power of 205 mW with the beam quality (M$^2$) of 1.42 was obtained from the P-polarization pump laser of 1000 mW.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.182-187
• /
• 2018

In this study, 20.8% of a p-type Si bifacial solar cell was used to develop a photovoltaic (PV) module to obtain the maximum power under a limited installation area. The transparent back sheet material was replaced during fabrication with a white one, which is opaque in commercial products. This is very beneficial for the generation of more electricity, owing to the additional power generation via absorption of light from the rear side. A new model is suggested herein to predict the power of the bifacial PV module by considering the backside reflections from the roof and/or environment. This model considers not only the frontside reflection, but also the nonuniformity of the backside light sources. Theoretical predictions were compared to experimental data to prove the validity of this model, the error range for which ranged from 0.32% to 8.49%. Especially, under $700W/m^2$, the error rate was as low as 2.25%. This work could provide theoretical and experimental bases for application to a distributed and microgrid network.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.69-76
• /
• 2003

청과류는 수송과 취급기간 중에 충격, 마찰, 눌림, 타박 등에 지속적으로 노출된다. 그러므로 농산물의 품질을 저하시키는 물리적인 손상을 최소화하기 위해 최선의 처리와 수송방법을 선택할 필요가 있다. 충격흡수 시스템이 갖추어진 대형 냉동 트레일러에 체리, 복숭아, 배, 토마토를 수송했을 때 3.5Hz에서 수직가속도가 가장 크게 나타났고 9-25Hz에서는 이보다는 약간 감소했다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.231-237
• /
• 2003

농산물은 육로를 통한 트레일러 수송 과정에서 파손의 우려가 있고, 진동으로 인한 물리적 손상은 미생물 증식이나 농산물 자체의 생리적 변화를 초래하는 원인이 되어 결국 품질 저하를 가져 올 수 있다 수송 중 가속도의 변화와 진동은 농산물의 탈색 현상과 타박상을 초래하여 상품 가치를 저하시키는 주요 요인으로 지목되고 있다. (중략)

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.26-29
• /
• 2005

Nanosize cobalt aluminate($CoAl_2O_4$) power was coated as filter layer for us to improve the color purity and contrast performances on the inner face of CRT panel. We simulated color properties by measuring the transmittance and thickness of the coated filter layer. Contrast performance could be improved and color gamut was also changed by the selective light absorption of filter layer at 580${\sim}$605 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1175-1178
• /
• 2005

Nanosize cobalt aluminate($CoAl_2O_4$) power as filter layer was coated to improve the color purityand contrast performances on inner face of CRT panel. We simulated color properties by measuring the transmittance and thickness of the coated filter layer. Contrast performance could be improved and color gamut was also changed because of the selective light absorption of filter layer at $580{\sim}605\;nm$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.448-452
• /
• 2002

We report the number of calibration and test for acoustic field which were conducted in KRISS between the year of 1990 and 2001. The items contain sound level meter and calibrator for calibration and sound absorption coefficient, transmission loss, sound pressure level of siren, sound pressure level and power of acoustic instrument and relative accessories for test. The data show that the number of them have been increased continuously.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1880-1882
• /
• 1997

구형 다층매질로 모델링된 인체의 두뇌부분에 평면가 입사할 때의 전력흡수 특성을 조사하였다. 사용된 두 주파수인 912MHz 및 2450MHz에서의 조직내의 흡수전력분포를 각각 계산하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.160-161
• /
• 2001

A diode laser system has been developed for the refractory glaucoma therapy. The diode lasers have merits in clinical usage including reduction of beam dispersion, higher absorption such as in melanin pigment, and lower complication in treatment. We present the system specification of laser diodes in 810mm with 3W power, which is delivered into the optical fiber core of 600${\mu}{\textrm}{m}$.