• The Journal of Korean Physical Therapy
• /
• v.22 no.2
• /
• pp.15-23
• /
• 2010

Purpose: This study was done to establish reference data for temporo-spatial, kinematic and kinetic parameters for normal Koreans as they age. Methods: Normal adults and children without a previous history of musculoskeletal problems were enrolled in this study. The normal subjects were divided by age into three groups: Group I: children ($11.95{\pm}0.29$ years); Group II: young adults ($23.90{\pm}3.67$ years); Group III: older adults ($71.40{\pm}4.08$ years). The temporo-spatial and kinematic data were measured using 6 MX3 cameras while each subject walked through a 10 m walkway at a self-selected speed. The kinetic data were measured using 2 force plates and were calculated by inverse dynamics. Results: Motion patterns are typically associated with a specific phase of the gait cycle. Our results were as follows: 1. There were significant differences between the different age groups in temporo-spatial parameters such as cadence, double support, time of foot off, stride length, step length, and walking speed. 2. There were significant differences between the groups in kinematic parameters such as range of motion (ROM) of the hip, knee and ankle in the sagittal plane, ROM of the pelvis, hip and knee in the coronal plane and ROM of the pelvis, hip and ankle in the transverse plane. 3. There were significant differences between the groups in kinetic parameters such as joint moments of force, joint mechanical power generation or absorption and ground reaction forces. Conclusion: The results of this study can be utilized (a) as a reference for kinematic and kinetic data of gait analysis in normal Koreans, and (b) as an aide in evaluating and treating patients who have problems relating to gait.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.273-273
• /
• 2014

Quantum-dot sensitized solar cells (QDSCs) are an emerging class of solar cells owing to their easy fabrication, low cost and material diversity. Despite of the fact that the maximum conversion efficiency of QDSCs is still far less than that of Dye-Sensitized Solar Cells (>12 %), their unique characteristics like Multiple Exciton Generation (MEG), energy band tune-ability and tendency to incorporate multiple co-sensitizers concurrently has made QDs a suitable alternative to expensive dyes for solar cell application. Lead Sulfide (PbS) Quantum dot sensitized solar cells are theoretically proficient enough to have a photo-current density ($J_{sc}$) of $36mA/cm^2$, but practically there are very few reports on photocurrent enhancement in PbS QDSCs. Recently, $Hg^{2+}$ incorporated PbS quantumdots and Cadmium Sulfide (CdS) co-sensitized PbS solarcells are reported to show an improvement in photo-current density ($J_{sc}$). In this study, we explored the efficacy of $In_2S_3$ as an interfacial layer deposited through SILAR process for PbS QDSCs. $In_2S_3$ was chosen as the interfacial layer in order to avoid the usage of hazardous CdS or Mercury (Hg). Herein, the deposition of $In_2S_3$ interfacial layer on $TiO_2$ prior to PbS QDs exhibited a direct enhancement in the photo-current (Isc). Improved photo-absorption as well as interfacial recombination barrier caused by $In_2S_3$ deposition increased the photo-current density ($J_{sc}$) from $13mA/cm^2$ to $15.5mA/cm^2$ for single cycle of $In_2S_3$ deposition. Increase in the number of cycles of $In_2S_3$ deposition was found to deteriorate the photocurrent, however it increased $V_{oc}$ of the device which reached to an optimum value of 2.25% Photo-conversion Efficiency (PCE) for 2 cycles of $In_2S_3$ deposition. Effect of Heat Treatment, Normalized Current Stability, Open Circuit Voltage Decay and Dark IV Characteristics were further measured to reveal the characteristics of device.

• The Korean Journal of Ecology
• /
• v.3 no.1_2
• /
• pp.31-39
• /
• 1980

Light energy utilization was investigated in the fallen stems of Opuntia bigelovii. Threshold time for the decreasing steady state of acid accumulation in the palisade tissue of Opuntia stems was 4 hours under 1,000 $\mu Em^{-2}sec^{-1}$ of PAR at $75^{\circ}C$, while stomatal closing throughout the stem stage was illustrated by 256.0-310.4 sec $\textrm{cm}^{-1}$ of stem diffusive resistance and 0.20g $day^{-1}$ of the water loss rate as cuticular resistance. The acid loss rate in the stems per 4 hours was related to tissue water contents and a few acid loss rate could be recognized at the water content rage of 56.4%~46.8%. Endogenous oscillation of tissue acidity due to the diurnal rhythmic phenomena depended on the tissue water content was found in the Opuntia stems with stomatal closing during the normal day/night cycle. The survival rate of 1 segment to survive 2 years old cactus was 22.7% in desert environments. Such a compensation photosynthesis which utilizes light energy and maintains the reassimilation of endogenous gases was interpreted as conceptual model.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.1
• /
• pp.19-33
• /
• 1997

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorological processes. In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification process through observation is emphasized.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.4
• /
• pp.306-315
• /
• 2016

Amorphous vanadium titanates (aVTOs) are examined for use as a negative electrode in lithium-ion batteries. These amorphous mixed oxides are synthesized in nanosized particles (<100 nm) and flocculated to form secondary particles. The $V^{5+}$ ions in aVTO are found to occupy tetrahedral sites, whereas the $Ti^{4+}$ ions show fivefold coordination. Both are uniformly dispersed at the atomic scale in the amorphous oxide matrix, which has abundant structural defects. The first reversible capacity of an aVTO electrode ($295mAhg^{-1}$) is larger than that observed for a physically mixed electrode (1:2 $aV_2O_5$ | $aTiO_2$, $245mAhg^{-1}$). The discrepancy seems to be due to the unique four-coordinated $V^{5+}$ ions in aVTO, which either are more electron-accepting or generate more structural defects that serve as $Li^+$ storage sites. Coin-type Li/aVTO cells show a large irreversible capacity in the first cycle. When they are prepared under nitrogen (aVTO-N), the population of surface hydroxyl groups is greatly reduced. These groups irreversibly produce highly resistive inorganic compounds (LiOH and $Li_2O$), leading to increased irreversible capacity and electrode resistance. As a result, the material prepared under nitrogen shows higher Coulombic efficiency and rate capability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.577-580
• /
• 2008

Concrete absorbs $CO_2$ in the air because of carbonation. according to rising concern for lasting earth environment efforts of reducing greenhouse gas, especially co2, are occurred whole industry throughout the world. In this paper selected one building and computed amount of production and absorbtion of co2 during its lifecycle at concrete. In computing amount of absorbtion of co2 considered amount of absorbtion according to the area of concrete changing senarioes of servicelife(40,60,80 years) and deconstruct preiod(60,40,20 years). As a result, size of concrete and maintenance period of disused concrete work increasement of $CO_2$ as main factors. We came to the conclusion that maintenance period is more important than recycle of unused concrete as a method for reducing environmental load in architectural industry.

• Journal of Plant Biology
• /
• v.17 no.2
• /
• pp.69-83
• /
• 1974

To elucidate the relationship between chemical structure and biological activity of alantolactone, and also to investigate the relationship between the growth of cells and the respiration of Chlorella pyrenoidosa affected by alantolactone, alantolactone and isoalantolactone were isolated from Inula helenium L., and di-, and tetrahydroalantolactones were prepared by the hydrogenation. At a concentration of 5$\times$10-5M alantolactone, the growth rate of Chlorella was greatly reduced. The viability of cells was also reduced over 50% within 2 hr at a concentration of 2.5$\times$10-4M alantolactone. However, oxygen uptake was increased by 20% over 3 hr. And 14CO2 production from glucose-1-14C, glucose-6-14C and 14C-acetate-U.L. was also increased by alantolactone. Biological activityof alantolactone was significantly reduced by cysteine, reduced glutathione or cystine but not by tryptophan or histidine. It was detected by spectrophotometrically and by TLC that alantolactone was also reacted with thiols except cystine. The solution of alantolactone reached with thiol gave the UV absorption spectrum of $\alpha$-saturated ${\gamma}$-lactone, and most of SH groups were disappeared by the addition reaction. From the reaction mixture of alantolactone and cysteine, a lactone adduct was isolated and purified. Isoalantolactone had shown similar activity as alantolactone, however, it was appeared that di-, and tetrahydroalantolactones were not only inactive biologically but also in vitro. It was concluded that there was no correlationship between increased respiration rate and mortality of Chlorella. During the respiration TCA cycle was activated, however it was uncertain that the activation of EMP or HMP was also appeared. Alantolactone and isoalantolactone were biologically active compounds but others were inactive. The reactivity of $\alpha$-methylene ${\gamma}$-lactone moiety toward SH group was principally responsible for its biological activity in sesquiterpene lactones.

• Journal of Environmental Health Sciences
• /
• v.15 no.1
• /
• pp.33-49
• /
• 1989

Pollution in the rivers has received considerable attention in recent years, particullary with reference to the effect due to increasing concentration of heavy metals. The metals are toxic to the ecosystem as a whole and to man in particular, since he is at the end of a variety of food chains by virture of his varigated diet. In addition, numerous laboratory tests have established that certain metals, such as Cd, pose a threat to a wide variety of aquatic organisms at concentrations as low as a few $\mu$g/1. Before the biological effects of heavy metals in impacted ecosystems can be completely assessed, however it is necessary to provide data on the concentration of heavy metals in such systems. This study was performed to investigate the concentration level of heavy metals in water, fish and sediments from upstream ($S_1-S_4$) to downstream ($S_5-S_9$) of the Mankyung river. Samples of water, fish, and sediments were collected along the tributaries of the Mankyung from September to October in 1987 and analyzed for lead, cadmium, copper, and zinc by atomic absorption spectrophotometer. From the data presented in this study, we can infer that the concentrations of the heavy metals investigated both in water and sediments are similar to those found in literature for unpolluted regions. The results obtained from the analysis of the edible tissue of the C. auratus show low concentration levels of the four heavy metals investigated. We conclude that the area is still relatively unpolluted and recommended continuing the monitoring of heavy metal concentrations to improve our understanding of their cycle in the river environment.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.387-393
• /
• 2010

The purpose of this study was to compare pregnant women's gait parameters and mechanical energies caused by changes in hormone levels and anatomical features such as body mass, body-mass distribution, joint laxity, and musculo-tendinous strength from pregnancy to postpartum. Ten subjects (height: $161{\pm}6.5cm$, mass: $62.7{\pm}10.4\;kg$, $66.4{\pm}9.3\;kg$, $68.4{\pm}7.7\;kg$, $57.2{\pm}7.7\;kg$) participated in the four times experiments (the first, middle, last term and after birth) and walked ten trials at a self-selected pace without shoes. The gait motions were captured with Qualisys system and gait parameters were calculated with Visual-3D. Pregnant women's gait velocities were decreased during the pregnancy periods, but increased after birth. Stride width and cycle time were increased during pregnancy, but decreased after birth. Thigh energy (77.4%) was greater than shank energy (19.06%) or feet (3.54%) about total energy of the lower limbs. Their feet (Left R2=0.881, Right R2=0.852) and shank (Left R2=0.318, Right R2=0.226) energies were significantly increased (positive correlation), but double limb stance time (DLST, R2=0.679) and body total energy (R2=0.138) were decreased (negative correlation) for their velocities. These differences suggest that thigh segment may be a dominant segment among lower limbs, and have something to do with gait velocities. Further studies should investigate joint power and joint work to find energy dissipation or absorption from pregnancy period to postpartum.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.14-23
• /
• 2018

$TiO_2-coated$ cubic ${\alpha}-Fe_2O_3$ with mostly exposed (012) and (101) facets (${\alpha}-Fe_2O_3@TiO_2$) was fabricated using a hydrothermal route for the photo-Fenton degradation of tetracycline under visible light irradiation. $TiO_2$ coating could greatly affect the photocatalytic activity of ${\alpha}-Fe_2O_3@TiO_2$. Compared with cubic ${\alpha}-Fe_2O_3$ alone for photodegradation of tetracycline, ${\alpha}-Fe_2O_3@TiO_2$ with $TiO_2$ shell of around 15 nm exhibited higher removal efficiency of tetracycline in photo-Fenton system, and its durability was slightly affected after five cycle times under same conditions. It is ascribed to the well-matched interface between cubic ${\alpha}-Fe_2O_3$ core and $TiO_2$ shell, leading to the broadened light-absorption and the efficient separation of photo-generated electon-hole pairs. The $^{\bullet}OH$ radicals were main responsible for the advanced photocatalytic performance of ${\alpha}-Fe_2O_3@TiO_2$ in visible-light driven degradation of tetracycline.