• 제목/요약/키워드: Absorption band

검색결과 981건 처리시간 0.031초

예열 온도 변화에 따른 Sol-Gel 법에 의해 제작된 ZnO 박막의 물리적 특성 연구 (Physical Properties of ZnO Thin Films Grown by Sol-Gel Process with Different Preheating Temperatures)

  • 김익주;한호철;이충선;송용진;태원필;서수정;김용성
    • 한국세라믹학회지
    • /
    • 제41권2호
    • /
    • pp.136-142
    • /
    • 2004
  • 출발물질로 zinc acetate dihydrate(Zn($CH_3$COO)$_2$$.$2$H_2O$)를 사용하였고, 이 물질을 isopropanol(($CH_3$)$_2$CHOH)-monoethanolamine(MEA:H$_2$NCH$_2$C$H_2O$H) 용액에 용해하여 균일하고 안정한 sol을 만들었다. Sol-gel spin-coating 법에 의해 ZnO 박막을 제조시 예열 온도에 따른 박막의 c-축 배향성과 그 물리적 특성을 조사하였다. c-축으로의 성장은 예열 온도의 변화에 따라 차이를 보였으며. 275$^{\circ}C$에서 예열 후 $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 XRD 측정결과 기판에 수직한 (002) 방향으로 강한 배향성을 나타내었다 200∼30$0^{\circ}C$에서 예열 후, $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 UV-vis측정결과 가시광선 영역에서 온도에 따른 투과도의 변화를 보이지만 평균 85% 이상의 높은 투과도를 보였다. 또한 370nm 부근에서 흡수단을 나타내었으며, 광학적 밴드갭은 약 3.22 eV로 나타났다. 발광방출(PL) 측정결과, 황색(620nm, 2.0 eV)발광이 관찰되어, 무기발광 소자로의 응용 가능성을 나타내었다.

초분광 단파적외선 영상 기술을 이용한 고추의 수분스트레스 측정 기술 개발 (Development of Drought Stress Measurement Method for Red Pepper Leaves using Hyperspectral Short Wave Infrared Imaging Technique)

  • 박은수;조병관
    • 생물환경조절학회지
    • /
    • 제23권1호
    • /
    • pp.50-55
    • /
    • 2014
  • 본 연구에서는 고추의 수분스트레스 반응을 최적으로 계측할 수 있는 알고리즘을 개발하기 위해 초분광 단파 적외선 영상기술을 적용하였다. 수분스트레스에 노출된 고춧잎의 단파적외선 분광영상을 획득하고 ANOVA 분석을 이용하여 수분스트레스 반응을 가장 잘 반영하는 파장영역을 선정하였다. 고춧잎의 단파적외선 초분광 영상을 이용하여 ANOVA 분석을 수행한 결과 수분스트레스 판별을 위한 최적 파장은 1449nm으로 물분자의 광흡수 영역대와 거의 일치하였다. 최적 파장에서의 고춧잎 상대반사값을 가우시안 회귀분석을 통해 정상군과 토양흡착수압이 -20kPa과 -50kPa일 때의 스트레스군을 구분할 수 있는 임계값을 계산하고 이 값을 기준으로 단파적외선 영상을 이진화하여 수분스트레스 반응을 판단할 수 있는 최종영상을 구축하였다. 결과 영상에서 정상군과 스트레스군의 토양흡착수압이 -20kPa인 잎의 경우 스트레스 반응을 보인 픽셀이 72%이었고, -50kPa인 잎에서는 스트레스 반응을 보인 픽셀이 84%로 12%차이가 났다. 정상군과 스트레스 강도가 다른 시료의 경우 영상의 결과가 명확히 구분되는 것으로 나타나 단파적외선 영상기술이 고춧잎의 수분스트레스 상태를 정량적으로 나타낼 수 있는 기술임을 확인할 수 있었다.

Benzothiadiazole-benzodithiophene을 기반으로 한 D/A구조의 공액 고분자 합성 및 광전변환 효율 특성 개선 연구 (Synthesis and Characterization of Power Conversion Efficiency of D/A Structure Conjugated Polymer Based on Benzothiadiazole-Benzodithiophene)

  • 성기호;윤대희;우제완
    • 공업화학
    • /
    • 제24권5호
    • /
    • pp.537-543
    • /
    • 2013
  • 본 연구에서는 유기박막태양전지로 적용 가능한 push-pull 구조의 고분자를 합성하여 그 특성을 확인하였다. 전자주개 물질로는 benzodithiophene 유도체를 도입하였고, 전자받개물질은 benzothiadiazole 유도체를 사용하여 Stille coupling 반응으로 poly{4,8-didodecyloxybenzo[1,2-b;3,4-b]dithiophene-alt-5,6-bis(octyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (PDBDT-TBTD)를 합성하였다. 각 합성 단계별 단량체의 확인은 $^1H-NMR$과 GC-MS를 통해 이루어졌으며, 합성된 conjugated polymer는 GPC, TGA, UV-Vis, cyclic voltammetry를 이용하여 물리적, 광학적 및 전기화학적 특성을 확인하였다. PDBDT-TBTD의 수평균 분자량은 6200이였으며, 초기 분해온도(5% weight loss temperature, $T_d$)값은 $323^{\circ}C$로 측정 되었다. 박막형태에서의 최대 흡수파장은 599 nm이며, 광학적 밴드갭(${E_g}^{opt}$)은 1.70 eV으로 확인되었다. 유기박막태양전지 소자는 ITO/PEDOT : PSS/PDBDT-TBTD : $PC_{71}BM/BaF_2/Ba/Al$ 구조로 제작하였으며, PDBDT-TBTD와 $PC_{71}BM$를 1 : 2 (w/w)의 비율로 블렌딩하여 광활성층으로 사용하였다. 제작된 소자는 solar simulator으로 광전변환효율을 확인하였고, 최대 광전변환효율은 2.1%이었다.

광 여기 루미네센스를 이용한 신기 퇴적층의 연대측정 (Optical dating of Quaternary sediment)

  • 홍덕균;최정헌;한정희;최만식;정창식
    • 암석학회지
    • /
    • 제10권3호
    • /
    • pp.202-211
    • /
    • 2001
  • 루미네센스(luminescence)는 석영이나 장석 등과 같은 무기결정이 외부에서 에너지를 받아 흡수된 에너지를 빛으로 바꿔 외부에 방출하는 물리적인 현상이다. 가전자대(valence band)에 존재하는 하전입자들은 전리성 방사선에 의해 전자와 정공(hole)으로 이온화 되고, 이온화된 전자와 정공들은 결정 내에서 자유로이 움직이다가 결정 내에 존재하는 격자결함에 포획된다. 이러한 결정을 빛으로 여기하면 격자결함에 포획된 전자들이 결함에서 빠져 나와 발광중심(recombination center)에서 정공과 재결합하면서 빛을 동반하게 되는데, 이를 광 여기 루미네센스(optically stimulated luminescence; OSL)라 한다. 열 루미네센스(thermoluminescence; TL) 연대 측정법의 원리와 같이, 광 여기 루미네센스를 적당한 조건에서 관측하면 퇴적층의 연대 계산에 응용할 수 있다. 광 여기 루미네센스를 연대측정에 이용하면 빛에 민감한 전자들만 여기시킬 수 있는 장점이 있다. 이 연구에서는 신기 퇴적층으로부터 분리된 석영을 청색 파장의 빛으로 여기하여 그로부터 검출된 광 여기 루미네센스를 신기 퇴적층의 연대 산출에 응용하였다. 논문에서는 광 여기 루미네센스 연대측정법과 관련된 일련의 실험방법 및 최근에 소개된 연구성과, 그리고 앞으로 보다 신뢰도 높은 연대측정 결과를 얻기 위해 연구되어야 할 내용을 이 연구에서 수행한 신기 퇴적층의 연대측정 결과와 함께 기술하였다.

  • PDF

광발광 측정법에 의한 $AgGaS_2$ 단결정 박막의 점결함 연구 (Study on Point Defect for $AgGaS_2$ Single Crystal Thin film Obtained by Photoluminescience Measurement Method)

  • 홍광준;김경석
    • 비파괴검사학회지
    • /
    • 제25권2호
    • /
    • pp.117-126
    • /
    • 2005
  • [ $AgGaS_2$ ] 단결정 박막을 수평 전기로에서 합성한 $AgGaS_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판 (반절연성 -GaAs (100))의 온도를 각각 $590^{\circ}C,\;440^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선 (DCRC)으로 부터 구하였다. $AgGaS_2$의 광흡수 스펙트럼으로부터 구한 온도에 의존하는 에너지 밴드갭 $E_g(T)$는 Varshni. 공식에 fitting한 결과 $E_g(T)=2.7284 eV-(8.695{\times}10^{-4}eV/K)T^2/T(T+332K)$를 잘 만족하였다. 성장된 $AgGaS_2$, 단결정 박막을 Ag, Ga, S분위기에서 각각 열처리하여 10K에서 photoluminescience(PL) spectrum을 측정하여 점 결함의 기원을 알아보았다. PL 측정으로부터 얻어진 $V_{Ag},\;V_s,\;Ag_{int}$, 그리고 $S_{int}$는 주개와 받개로 분류되어졌다. $AgGaS_2$ 단결정 박막을 Ag분위기에서 열처리하면 n형으로 변환됨을 알 수 있었다. 또한, Ca 분위기에서 열처리하면 열처리 이전의 PL스펙트럼을 보이고 있어서, $AgGaS_2$ 단결정 박막에서 Ga은 안정된 결합의 형태로 있기 때문에 자연 결함의 형성에는 관련이 없음을 알았다.

이종접합 박막태양전지 흡광층 CdTe 박막의 화학적기계적연마 특성 연구 (Study on chemical mechanical polishing characteristics of CdTe thin film absorption-layer for heterojunction thin film solar cell)

  • 박주선;임채현;류승한;김남훈;이우선
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 춘계학술대회 논문집
    • /
    • pp.49-49
    • /
    • 2009
  • 최근 범세계적인 그린에너지 정책에 관련해 화석연료를 대체할 수 있는 수소, 풍력, 태양광 등의 대체 에너지에 대한 관심이 고조되고 있다. 이러한 여러 대체에너지 중에서도 태양광을 전기에너지로 변환하는 태양전지에 관한 연구가 집중되고 있다. 태양전지는 구조적으로 단순하고 제조 공정도 비교적 간단하지만, 보다 널리 보급되기 위해서는 경제성 향상이라는 문제점을 해결해야 한다. 이를 위해서는 기존의 실리콘 태양전지를 대체할 수 있는 신물질에 대한 연구가 필요하며, 그 중에서도 반도체 기술을 이용한 박막형 태양전지는 기존의 실리콘 태양 전지가 가지고 있는 고비용이라는 문제점을 극복할 수 있을 것으로 기대를 모으고 있다. 박막형 태양전지의 박막 재료로는 CIGS, CdTe 등이 연구되어지고 있지만, 아직까지는 기존의 실리콘 태양전지에 비해 에너지변환효율이 낮은 이유로 인해 실용화가 많이 이루어지지 못하고 있는 것이 사실이다. 이러한 박막형 태양전지의 재료들 중에서도 CdTe는 이종접합 박막형 태양전지에 흡광층으로 사용되는 것으로 상온에서 1.45eV 정도의 밴드갭(band gap) 에너지를 갖는 II-VI족 화합물반도체로써 태양광 스펙트럼과 잘 맞는 이상적인 밴드랩 에너지와 높은 광흡수도 때문에 박막형 태양전지로 가장 주목을 받고 있다. CdTe 박막의 제조 방법으로는 진공증착법(vacuum evaporation), 전착법(electrodeposition), 스퍼터링법(sputtering) 등이 있지만 본 연구에서는 스퍼터링법을 이용하여 박막을 증착하였다. 이상과 같이 증착된 CdTe 박막을 화학적기계적연마(CMP, chemical mechanical polishing) 공정을 적용시킴으로써, 태양전지의 에너지변환효율에 직접적인 영향을 끼칠 수 있는 CdTe 박막의 물리적, 전기적 특성들의 변화를 연구하기 위한 선행 연구를 진행하였다. 특히 본 연구에서는 CdTe 박막의 화학적 기계적 연마 특성을 분석하여 정규화를 통한 모델링을 수행하였다. 또한 화학적기계적연마 공정 전과 후의 표면 특성을 관찰하기 위해 SEM(scanning electron microscopy)과 AFM(atomic forced microscope)를 이용하였으며, 구조적 특성 관찰을 XRD(X-ray diffraction)를 사용하여 실험을 수행하였다.

  • PDF

In-situ Synchrotron Radiation Photoemission Spectroscopy Study of Property Variation of Ta2O5 Film during the Atomic Layer Deposition

  • Lee, Seung Youb;Jeon, Cheolho;Kim, Seok Hwan;Lee, Jouhahn;Yun, Hyung Joong;Park, Soo Jeong;An, Ki-Seok;Park, Chong-Yun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.362-362
    • /
    • 2014
  • Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

  • PDF

Cloning and Characterization of Monofunctional Catalase from Photosynthetic Bacterium Rhodospirillum rubrum S1

  • Lee, Dong-Heon;Oh, Duck-Chul;Oh, You-Sung;Malinverni, Juliana C.;Kukor, Jerome J.;Kahng, Hyung-Yeel
    • Journal of Microbiology and Biotechnology
    • /
    • 제17권9호
    • /
    • pp.1460-1468
    • /
    • 2007
  • In this study, an approx. 2.5-kb gene fragment including the catalase gene from Rhodospirillum rubrum S1 was cloned and characterized. The determination of the complete nucleotide sequence revealed that the cloned DNA fragment was organized into three open reading frames, designated as ORF1, catalase, and ORF3 in that order. The catalase gene consisted of 1,455 nucleotides and 484 amino acids, including the initiation and stop codons, and was located 326 bp upstream in the opposite direction of ORF1. The catalase was overproduced in Escherichia coli UM255, a catalase-deficient mutant, and then purified for the biochemical characterization of the enzyme. The purified catalase had an estimated molecular mass of 189 kDa, consisting of four identical subunits of 61 kDa. The enzyme exhibited activity over a broad pH range from pH 5.0 to pH 11.0 and temperature range from $20^{\circ}C$ to $60^{\circ}C$C. The catalase activity was inhibited by 3-amino-1,2,4-triazole, cyanide, azide, and hydroxylamine. The enzyme's $K_m$ value and $V_{max}$ of the catalase for $H_2O_2$ were 21.8 mM and 39,960 U/mg, respectively. Spectrophotometric analysis revealed that the ratio of $A_{406}$ to $A_{280}$ for the catalase was 0.97, indicating the presence of a ferric component. The absorption spectrum of catalase-4 exhibited a Soret band at 406 nm, which is typical of a heme-containing catalase. Treatment of the enzyme with dithionite did not alter the spectral shape and revealed no peroxidase activity. The combined results of the gene sequence and biochemical characterization proved that the catalase cloned from strain S1 in this study was a typical monofunctional catalase, which differed from the other types of catalases found in strain S1.

화순 폐탄광지역 광산배수와 침전 및 증발잔류광물에 대한 지구화학적 및 광물학적 연구 (Geochemistry and Mineralogy of Mine Drainage Water Precipitate and Evaporite Minerals in the Hwasoon Area)

  • 박천영;정연중;강지성
    • 자원환경지질
    • /
    • 제33권5호
    • /
    • pp.391-404
    • /
    • 2000
  • This study investigated the geochemical characteristics of mine drainage discharged from an abandoned coal mine in the Hwasoon area. Surface water samples were collected from 23 locations along the Hancheon creek. The concentration of Zn and Cu in stream waters was highest at low pH (3.53), whereas the content of TDS and TDI was highest at high pH (7.78) due to the concentration of Ca, $HCO_3$ and $SO_4$. At the upstream site, the Ba, Fe, Mn, Zn, and $SO_4$ contents were relatively high but decreased significantly with the distance from the coal mine. On the contrary, the Na and $NO_3$ contents were low at the upstream site but increased downstream. Yellow precipitate material collected in the Hancheon consisted mainly of iron and LOI. This yellow precipitate was heated from 100 to $900^{\circ}C$ for 1 hour. With increasing temperature, the intensity of hematite peaks were sharply produced in X-ray pattern and the absorption band Fe-O of hematite increased in IR due to dehydration and melting. The yellow to brown precipitate and evaporite materials were collected by a air-dry from the acid mine water at the laboratory. After drying, the concentration of ions in the acid water samples increased progressively in oversaturation with respect to either gypsum, ferrohexahydrite or quenstedetite. The X-ray powder diffraction studies identified that the precipitated and evaporated materials after drying were well crystallized gypsum, ferrohexahydrite and quenstedetite. Diagnostic peaks used for identification of gypsum were the 7.65, 4.28, 3.03, 2.87 and 2.48$\AA$ peaks and those for ferrohexahydrite were the 5.46, 5.12, 4.89, 4.44, 4.05, 3.62, 3.46, 3.40, 3.20, 3.03, 2.94, 2.53, 2.28, 2.07, 1.88 and 1.86${\AA} peaks. The IR spectra with OH-stretching, deformation of $H_2O$and ${SO_4}^{2-}$stretching vibration include the existence of gypsum, ferrohexahydrite and quenstedetite in the precipitated and evaporite materials. In the SEM and EDS analysis for the evaporite material, gypsum with well-crystallized, acicular, and columnar form was distinctly observed.

  • PDF

Photoferroelectric 반도체의 광학적 특성 연구 IV. (SbSI:V, SbSeI:V, BiSI:V, BiSeI:V, SbSI:Cr, SbSeI:Cr, BiSI:Cr, BiSeI:Cr, SbSI:Ni, SbSeI:Ni, BiSI:Ni 및 BiSeI:Ni 단결정의 광학적 특성에 관한 연구) (Optical Properties of Photoferroelectic Semiconductors IV.(Optical Properties of SbSI:V, SbSeI:V, BiSI:V, BiSeI:V, SbSI:Cr, SbSeI:Cr, BiSI:Cr, BiSeI:Cr, SbSI:Ni, SbSeI:Ni, BiSI:Ni and BiSeI:Ni Single Crystals))

  • 오석균;현승철;윤상현;김화택;김형곤;최성휴;윤창선;권숙일
    • 한국진공학회지
    • /
    • 제2권2호
    • /
    • pp.236-245
    • /
    • 1993
  • SbSI : V, SbSeI : V, BiSI : V, BiSeI : V, SbSI : Cr, SbSeI : Cr, BiSI : Cr, BiSeI : Cr, SbSI : Ni, SbSeI : Ni, BiSI : Ni, 및 BiSeI : Ni 단결정을 고순도(99.9999%)의 성분원소에 혼합물을 투명석 영관내에 넣고, $1{\times}10^{-6}mmHg$의 진공에서 봉입하여 합성한 ingot를 사용하여, 수직 Bridgman 방법으로 성장시켰다. 성장된 단결정의 구조는 orthorhombic 구조이며, 광학적 energy band gap 구조는 간접전이형 이었고, energy gap의 온도의존성은 상전이에 관계되는 2개의 변곡점이 나타났으며, 연속된 영역에서는 Varshni 방정식을 만족하였다. 첨가한 3d 불순문(V, Cr, Ni)은 모결정의 $T_d$ 대칭을 갖는 주격자점에 +2가 ion으로 위치하며, 이들 ion의 energy 준위간의 전자전이에 의하여 불순물 광흡수 peak가 나타난다.

  • PDF