• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.34-34
• /
• 2010

Absolute electron-impact cross sections for molecular targets including their radicals are important in developing plasma reactors and testing various plasma processing gases. However, low-energy electron collision data for these gases are sparse and only the limited cross section data are available. In this presentation, the methods and the status of measurements of, mainly, absolute elastic cross sections for electron-polyatomic molecule collisions will be discussed with recent results from Chungnam National University. Elastic cross sections are essential for the absolute scale conversion of inelastic cross sections, as well as for testing computational methods.

• Journal of the Optical Society of Korea
• /
• 제4권2호
• /
• pp.89-93
• /
• 2000

Recently a new signal processing algorithm for white light interferometry was presented. In this paper, the proposed signal processing algorithm was applied for absolute temperature measurement using white light interferometry. Stability testing and absolute temperature measurement were demonstrated. Stability test demonstrated the feasibility of absolute temperature measurement with an accuracy of 0.015 fringe. The test also showed that the absolute temperature measurement system using white light interferometry is capable of obtaining the theoretical minimum detectable change (0.0005 fringe), which is consistent with the performance predicted by the proposed signal processing algorithm.

• 비파괴검사학회지
• /
• 제24권4호
• /
• pp.315-324
• /
• 2004

와전류 탐상에서 차동형 탐촉자는 신호에 영향을 미치는 변수들을 줄일 수 있어 흔히 사용된다 그러나 차동신호는 인접한 두 코일의 임피던스 차이를 신호로 사용하기 때문에 신호예측이나 해석이 쉽지 않다는 단점이 있다. 반면에 절대코일에 의한 신호는 상대적으로 형태가 단순하므로 신호예측이나 해석이 더 수월하다. 따라서 서로의 장, 단점을 상호보완적으로 사용하면 검사 신뢰도를 향상시키는데 큰 도움이 될 것이다. 본 논문에서는 인코넬 평판과 튜브에서 절대코일 신호를 예측하기 위하여 유한요소해석을 수행하였고, 리프트 오프, 충전율, 전도도, 탐상 주파수, 피검사체의 두께, 내, 외부 결함 등이 신호에 미치는 영향을 계산하여 임피던스 평면도로 작성하고, 신호특징을 분석하였다. 그 결과, 절대신호에 대한 많은 실용적인 지식을 축적할 수 있었고, 절대신호와 차동신호 특성의 유사성을 이해하게 되었으며, 결함깊이와 주파수 변화에 따른 신호의 기울기를 대응곡선 그래프로 자성할 수 있었다.

• 비파괴검사학회지
• /
• 제25권3호
• /
• pp.201-208
• /
• 2005

In this paper, absolute and differential eddy current signals from various defects in the steam generator tube are numerically predicted and their signal slope characteristics are investigated. The signal changes due to frequency increase are also observed. After studying signal patterns from various defects and frequencies, the analysis of mixed defect signals affected by the presence of a ferromagnetic support plate is attempted. For the signal prediction, axisymmetric finite element modeling is used and this leads us to the slope angle analysis of the signal. Results show that differential signals are useful for locating the position of a defect under the support plate, while absolute signals are easy to presume and interpret even though the effect of support plate is mixed. Combined use of these two types of signals will help us accomplish a more reliable inspection.

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.135-142
• /
• 1999

The objective of this paper is to provide an automatic color image testing system capable of synthetically testing a color element like a color tone and a luminance for a color image displayed on the screen, using a CCD camera and a microprocess. The system consists of a CCD camera, a line conveyor, a camera driving part, a remocon, a remote sensing part, a display and a PC including a color vision board and a CPU board. By applying the system to a process, reliability for a testing result can be improved and the absolute criterion to judge a part can be made.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.174-180
• /
• 2006

Steam generator (SG) tubes are expanded inside tubesheet holes by using explosive or hydraulic methods to be fixed in a tubesheet. In the tube expansion process, it is important to minimize the crevice gap between expanded tube and tube sheet. In this paper, absolute and differential signals are computed by a numerical method for several different locations of tube expansion inside and outside a tubesheet and signal variations due to tubesheet, tube expansion and operating frequencies are observed. Results show that low frequency is good for detecting tubesheet location in both types of signals and high frequency is suitable for sizing of tube diameter as well as the detection of transition region. Also learned is that the absolute signal is good for measuring tube diameter, while the differential signal is good for locating the top of tubesheet and both ends of the transition region. In the case of mingled anomaly with tube expansion and tubesheet, low frequency inspection is found to be useful to analyze the mixed signal.

• Journal of the Korean Statistical Society
• /
• 제22권1호
• /
• pp.71-81
• /
• 1993

Among k independent normal populations with unknown means and a common unknown variance, the problem of detecting the population with the largest absolute value of mean is considered. This problem is formulated in a manner close to the framework of testing hypotheses, and the maximum error probability and the minimum power are considered. The power charts necessary to determine the sample size are provided. The problem of detecting the population with the smallest absolute value of mean is also considered.

• 비파괴검사학회지
• /
• 제26권4호
• /
• pp.231-238
• /
• 2006

위상 배열 초음파 기법을 이용한 국내 표준형 윈전 저압 터빈의 디스크 검사에 대하여 연구하였다. 이를 위하여 디스크 mockup을 제작하고 결함을 가공하였으며 결함에 대한 검출과 길이 측정 방법에 따른 결과를 고찰하였다. 깊이 측정에서 릴은 결함은 AATT(absolute arrival time technique)방법 혹은 RATT (relative arrival time technique)방법을 사용하여 깊이를 측정할 수 있었으나, 조기에 발견하여야 할 깊이가 깊지 않은 결함은 이와 같은 방법으로 깊이를 측정할 수 없었다. 이 경우 결함 신호가 나타나는 각도 범위를 이용하여 결함 깊이를 측정하였으며 유용한 도구임을 확인하였다.

• Genomics & Informatics
• /
• 제14권4호
• /
• pp.187-195
• /
• 2016

In genetic association studies with high-dimensional genomic data, multiple group testing procedures are often required in order to identify disease/trait-related genes or genetic regions, where multiple genetic sites or variants are located within the same gene or genetic region. However, statistical testing procedures based on an individual test suffer from multiple testing issues such as the control of family-wise error rate and dependent tests. Moreover, detecting only a few of genes associated with a phenotype outcome among tens of thousands of genes is of main interest in genetic association studies. In this reason regularization procedures, where a phenotype outcome regresses on all genomic markers and then regression coefficients are estimated based on a penalized likelihood, have been considered as a good alternative approach to analysis of high-dimensional genomic data. But, selection performance of regularization procedures has been rarely compared with that of statistical group testing procedures. In this article, we performed extensive simulation studies where commonly used group testing procedures such as principal component analysis, Hotelling's $T^2$ test, and permutation test are compared with group lasso (least absolute selection and shrinkage operator) in terms of true positive selection. Also, we applied all methods considered in simulation studies to identify genes associated with ovarian cancer from over 20,000 genetic sites generated from Illumina Infinium HumanMethylation27K Beadchip. We found a big discrepancy of selected genes between multiple group testing procedures and group lasso.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1059-1071
• /
• 2008

In a balanced factorial design with a nested factor where crossed factors as well as a nested factor exist simultaneously, powers of the rank transformed FR statistic for testing the main, nested and interaction effects are superior to those of the parametric F statistic. In heavy tailed distributions such as exponential and double exponential distributions, powers of the FR statistic show much higher level than those of the F statistic. Further powers of the F and FR statistic for testing the main effect show the highest level in an absolute size as compared with powers of the F and FR statistic for testing the nested and interaction effects. However powers of the FR statistic for testing the nested and interaction effects rather than the main effect are greater in a relative size than powers of F statistic for the all population distributions.