• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.205-217
• /
• 2024

This study evaluated the physical characteristics and quality of volcanic rocks distributed in the Jeju Island-Ulleung Island area as aggregate resources. The main rocks in the Jeju Island area include conglomerate, volcanic rock, and volcanic rock. Conglomerate is composed of yellow-red or gray heterogeneous sedimentary rock, conglomerate, and encapsulated conglomerate in a state between lavas. Volcanic rocks are classified according to their chemical composition into basalt, trachybasalt, basaltic trachytic andesite, trachytic andesite, and trachyte. By stratigraphy, from bottom to top, Seogwipo Formation, trachyte andesite, trachybasalt (I), basalt (I), trachybasalt (II), basalt (II), trachybasalt (III, IV), trachyte, trachybasalt (V, VI), basalt (III), and trachybasalt (VII, VIII). The bedrock of the Ulleung Island is composed of basalt, trachyte, trachytic basalt, and trachytic andesite, and some phonolite and tuffaceous clastic volcanic sedimentary rock. Aggregate quality evaluation factors of these rocks included soundness, resistance to abrasion, absorption rate, absolute dry density and alkali aggregate reactivity. Most volcanic rock quality results in the study area were found to satisfy aggregate quality standards, and differences in physical properties and quality were observed depending on the area. Resistance to abrasion and absolute dry density have similar distribution ranges, but Ulleung Island showed better soundness and Jeju Island showed better absorption rate. Overall, Jeju Island showed better quality as aggregate. In addition, the alkaline aggregate reactivity test results showed that harmless aggregates existed in both area, but Ulleungdo volcanic rock was found to be more advantageous than Jeju Island volcanic rock. Aggregate quality testing is typically performed simply for each gravel, but even similar rocks can vary depending on their geological origin and mineral composition. Therefore, when evaluating and analyzing aggregate resources, it will be possible to use them more efficiently if the petrological-mineralological research is performed together.

• Journal of Korean Academy of Nursing
• /
• v.29 no.1
• /
• pp.117-126
• /
• 1999

Accidents involving children are an important cause of death and disability. They also have enomorous financial implications. In order to prevent childhood accidents, research and education for safety should be strengthened. The purpose of this study was to determine how often young children have accidents and what factors affect the accident rate. The sample consisted of 771 children who were in the second, third and forth grades of two elementary schools located in Kyung-gi Province. One school had students from middle class families living in apartment complexes and the other, students from lower income families mainly living in single houses. The questionnaires included items on the occurance of accidents and the parents' attitudes regarding accidents during the academic year from March 1997 to February 1998. The Questionnaires were distributed to conventiently selected students to be compeleted by their parents and collected during the period of May 28, to June 6, 1998. The data were analyzed using SAS PC statistical package. The results of the study are as follows ; 1. Of 771 student subjects, 393 had 887 accidental injuries during the study period. 2. The month, the day and the time with the highest accident rate were May, Sunday, and between 1 and 4 p. m. each. 3. In the analysis of the location where the injury took place, the most frequent place was on around their homes followed by school and, then, inside the home 4. Most of the accidents were caused by carelessness on the part of the children and the most frequent type of injury was an abrasion. 5. Children most injured their legs 6. They were treated at home most often and usually emergency treatment was performed by family members with, disinfection being the main type of first aid. Cost of the treatment ranged from 8,000 to 20,000 won in most cases. 7. House type and parents' education level were statistically significant in chi-square analysis. 8. Parents educate their children about traffic safety most frequently followed by fire safety and, then, prevention of violence. 9. Parents think that prevention of violence should be the most important part of injury prevention education both at school and home. 10. To identify factors related to accident occurrence, multiple logistic regression was performed and the main factors were birth order and house type.

• Research in Community and Public Health Nursing
• /
• v.12 no.3
• /
• pp.815-827
• /
• 2001

Accidents involving students are an important cause of death and disability. They also have enormous financial implications. In order to prevent childhood accidents. research and education for safety should be strengthened. The purpose of this study was to determine how often lower grade elementary students have accidents and what factors affect the accident rate. The study population consisted of 676 students who were in the 2nd, 3rd and 4th grades of twelve elementary schools located in Kun Wi Gun. The questionnaires were distributed to all of the 2nd to 4th grade student in the Kun Wi Gun to be completed by their parents about all the accidents which happened last one year and collected during the period of March 19, to March 30, 2001. The data were analyzed by using SPSS WIN 10.0 statistical package. The results of the study are as follow: 1. Among 676 students. 270 students had 540 accidental injuries during the study period. 2. The month, the day and the time with the highest accident rate were April. Monday. and between 1 and 4 p. m. each. 3. In the analysis of the location where the injury took place, the most frequent place was on school, around their homes and. then inside the home. 4. Most of accidents were caused by carelessness on the part of the students and the most frequent type of injury was an abrasion. 5. Students most injured part of the body was their legs. 6. They were treated at home most often and usually emergency treatment was performed by family members with disinfectant as first aid measure. Cost of the treatment of the accident ranged from 10.000 to 30,000 won in most cases. 7. Students' personality. type of family composition. mother's age and parents' education level were statistically significant. As a conclusion. 1st to 3rd grade rural elementary students need their assessment for accident involving condition. This study gave a very useful and important data to prepare accident prevention teaching program and to prepare accident prevention strategies.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.133-142
• /
• 2022

The purpose of this study is to develop an impact crusher with a radial rotating plate installed at the bottom, which is a shock absorber that can produce high-quality recycled coarse aggregate for concrete and to verify the effect of improving the quality performance of recycled coarse aggregate and its applicability through concrete tests. As a result, it showed improved quality in all items such as absolute dry density, absorption rate, abrasion resistance, Particle shape judgment rate, amount lost in the 0.08 mm sieve passing test, alkali aggregate reaction, clay mass, stability, and impurity content, and it was found to meet the criteria of recycled aggregate quality standards. In addition, the air volume and slump of concrete to which recycled coarse aggregate is applied meet all domestic standards. According to the test results of the compressive strength characteristics by age of concrete according to the mixing ratio of the recycled coarse aggregate, it was confirmed that the mixing ratio of the recycled coarse aggregate was applicable up to 60 %.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.58-65
• /
• 2019

Polymer concrete is expected to be widely used as a building material because it has a shorter hardening time and excellent compression, tensile, bending, bond strength, frictional resistance and abrasion loss compared to general concrete. The polymer concrete has excellent vibration damping performance and research on the use of various reinforcing materials is being conducted. However, in order to completely replace the general concrete and the general anti-vibration reinforcement, such polymer concrete requires an overall review of vibration reduction performance considering physical properties, dynamic properties, productivity and field applicability. In this study, the physical and dynamic properties of polymer concrete by epoxy mixing ratio were compared with those of general concrete. It was appeared that compression, tensile, bending and bond strengths of polymer concrete by epoxy mixing were significantly higher than those of general concrete. Especially, the tensile strength was more than 4 ~ 6.5 times. Based on the basic physical properties of polymer concrete, the damping ratio, which is a dynamic characteristic according to the epoxy mixing ratio, was derived through analytical models and experiments. As a result, the dynamic stiffness of polymer concrete was 20% higher than that of general concrete and the loss rate was about 3 times higher.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.595-605
• /
• 2000

Dental ceramics have good aesthetics, biocompatibility, low thermal conductivity, abrasion resistance, and color stability. However poor resistance to fracture and shrinkage during firing process have been limiting factors in their use, particularly in multiunit ceramic restorations. A new method for making all-ceramic crowns that have high strength and low processing shrinkage has been developed and is referred to as the Vita In-Ceram method. This study was performed to investigate the effect of $CeO_2$ addition in borosilicate glasses on the strength of alumina-glass composites. Porous alumina compacts were prepared by slip casting and sintered at $1,100^{\circ}C$ for 2 hours. Dense composites were made by infiltration of molten glass into partially sintered alumina at $1,140^{\circ}C$ for 4 hours. Specimens were polished sequentially from #800 to #2000 diamond disk. and the final surface finishing on the tensile side was received an additional polishing sequence through $1{\mu}m$ diamond paste. Biaxial flexure test was conducted by using ball-on-three-ball method at a crosshead speed of 0.5mm/min. To examine the microstructural aspect of crack propagation in the alumina-glass composites, Vickers-produced indentation crack was made on the tensile surface at a load of 98.0 N and dwell time of 15 sec, and the radial crack patterns were examined by an optical microscope and a scanning electron microscope. The results obtained were summarized as follows; 1. The porosity rates of partially sintered alumina decreased with the rising of firing temperature. 2. The maximum biaxial flexure strength of 423.5MPa in alumina-glass composites was obtained with an addition of 3 mol% $CeO_2$ in glass composition and strength values showed the aspect of decrease with the increase of $CeO_2$ content. 3 The biaxial flexure strength values of alumina-glass composites were decreased with rising the firing temperature. 4. Observation of the fracture surfaces of alumina-glass composites indicated that the enhancement of strength in alumina-glass composites was due to the frictional or geometrical inter-locking of rough fracture surfaces and ligamentary bridging by intact islands of materials left behind the fracture front.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.85-93
• /
• 2011

This study experimented to evaluate the environment friendly high performance ternary cement concrete deck overlay pavement using mineral admixture such as fly ash and ground granulated blast-furnace slag. It was measured to find best binder mixing according to replacement rate of mineral admixture with compressive strength and flexural strength. After finding best binder, it is also experimented to evaluate durability on chloride penetration resistance, freezing- thawing resistance, scaling resistance of deicing chemicals, abrasion resistance, alkali-silica reactivity test and bonded environment friendly high performance ternary cement concrete deck overlay pavement experimented to evaluate bonded old deck and new concrete overlay pavement using special polymer cement mortar. In additions, bonded environment friendly high performance ternary cement concrete deck overlay pavement by experimental construction was evaluated at interchange bridge of North Yeoju. Result, examination was indicated better binding with binder replacement of cement 70%, ground granulated blast-furnace slag 15% and fly ash 15%. And special polymer cement mortar used in old deck and new overlay concrete was indicated better bonding both laboratory and construction.

• Journal of Chest Surgery
• /
• v.38 no.5 s.250
• /
• pp.371-376
• /
• 2005

Background: Retrospective study was carried out on patients with primary spontaneous pneumothorax with the aim of determining if conventional thoracoscopic wedge resection is superior to modified transaxillary minithoracotomy with thoracoscopy in the surgical treatment. Material and Method: 160 patients, aged 14 to 35 years with primary spontaneous pneumothorax were involved in this study. Patients were assigned to two groups by surgical technique; Conventional thoracoscopic wedge resection (group A; n=80) and modified transaxillary minithoracotomy with thoracoscopy (group B; n=80). Apical pleural abrasion & talc poudrage were performed in all cases. This study evaluated the following factors: duration of operation, days of analgesics used after operation, number of no air leak on the first postoperative day, duration of indwelling chest tube, hospital stay, postoperative complications, chronic chest pain (during follow-up) and resumption of normal activity. Relapses (ipsilateral recurrence after discharge) during follow-up periods were evaluated. Result: No significant differences were found in any of the factors studied in either group. Conclusion: Conventional thoracoscopic wedge resection and modified transaxillary minithoracotomy with thoracoscopy offer similar results in the surgical treatment of primary spontaneous pneumothorax. The rate of complication is low and the level of pain is acceptable without long-term sequele. Therefore, modified transaxillary minithoracotomy with thoracoscopy method appears as a valuable alternative surgical technique.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.125-130
• /
• 2015

Specific techniques and materials in conservation of traditional lacquer has not been transmitted. This study aims to compare the basic characteristics of the filler which used in the base layer of lacquer conservation. Tohoe(a mixture of lacquer and Clay) and the three kinds of additives which is mixed with Tohoe and Goksu(a mixture of lacquer, wood powder and rice starch) are estimated in drying rate, impact resistance, abrasion. Among those samples, the more amount of clay causes fast dryness speed and worse cracks on the surface. The impact resistance is weakened at high amount of clay. There is no significant differences of impact resistance between both additives that is mixed with the samples and additives. The samples that are mixed with Goksu and additives show high impact resistance. In the polishing test, the more amount of filling powders show higher grinding degree and the sample that are mixed with wood powder and charcoal show higher degree as well. The highest grinding degree is Maekchil and Goksu but the lowest one is the sample of the rooftile powder mixture.