• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.4
• /
• pp.47-55
• /
• 1989

The effects of thermal cycle, aging heat treatment and Boron addition on the phase transformation characteristics and mechanical properties of the shape memory alloys of Cu-Zn-Al system, which was designed to operate about $80^{\circ}C$ by this research group, were studied. From the view point of the effects of thermal cycle on the phase transformation temperature change, it was found that up to 100 cycles Ms and Af points increased by $3-7^{\circ}C$ and Mf decreased a little bit and after that all of them were remain constant, and As point was not affected. All of the phase transformation temperatures were decreased $5-7^{\circ}C$ by aging heat treatment, at $140^{\circ}C$ for 24h however the effects of thermal cycle on aged alloys were same as on unaged alloys. As the thermal cycle increased the shape memory ability decreased a little up to 20 cycles, but above that it kept almost same ability. By Boron addition, grain size was refined from $1500{\mu}m$ to about $330{\mu}m$ and the hardness, fatigue property were improved but shape memory ability was lowered.

• Journal of Acupuncture Research
• /
• v.17 no.3
• /
• pp.57-68
• /
• 2000

This study was done to observe the effect on the local thermal change of herbal acupuncture on D.I.T.I.. The study group comprised 23 students who go to Woo-suk university oriental medical school. The study group was divided into three groups. One was NS(NORMAL SALINE) group, another was CF(CARTHAMI SEMEN) group and the other was BU(FEL URSI + BEZOAR BOVIS) group. Herbal Acupuncture fluid was injected on the P'ungmun(B12), P'yesu(B13), Pubun(B41), Paek'o(B42) acupuncture points. In results, the injection of herbal acupuncture fluid has brought out dermatothermal changes. BU group expressed significant changes in 24hours, 48hours, 72hours. The above results indicate that herbal acupuncture fluid has different effects on the dermatothermal change following times. BU group is lastest in duration of physical reactions. We consider that this results are helpful for saying about the effect of herbal acupuncture in clinical use.

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.32-42
• /
• 2011

Frequency reuse among relay stations (RSs) in a down-link access zone is widely adopted for throughput enhancement in IEEE 802.16j relay networks. Since the areas covered by the RSs or the base station (BS) may overlap, some mobile stations (MSs) at the border between two neighboring transmitting stations (RS or BS) using an identical frequency band may suffer severe interference or outage. This co-channel interference within the cell degrades the quality of service (QoS) fairness among the MSs as well as the system throughput. Exclusive use of a frequency band division (orthogonal resource allocation) among RSs can solve this problem but would cause degradation of the system throughput. We observe a trade-off between system throughput and QoS fairness in the previously reported schemes based on frequency reuse. In this paper, we propose a new frequency reuse scheme that achieves high system throughput with a high fairness level in QoS, positioning our scheme far above the trade-off curve formed by previous schemes. We claim that our scheme is beneficial for applications in which a high QoS level is required even for the MSs at the border. Exploiting the features of a directional antenna in the BS, we create a new zone in the frame structure. In the new zone, the RSs can serve the subordinate MSs at the border and prone to interference. In a 3-RS topology, where the RSs are located at points $120^{\circ}$ apart from one another, the throughput and Jain fairness index are 10.64 Mbps and 0.62, respectively. On the other hand, the throughput for the previously reported overlapped and orthogonal allocation schemes is 8.22 Mbps (fairness: 0.48) and 3.99 Mbps (fairness: 0.80), respectively. For a 6-RS topology, our scheme achieves a throughput of 18.38 Mbps with a fairness of 0.68; however, previous schemes with frequency reuse factors of 1, 2, 3, and 6 achieve a throughput of 15.24 Mbps (fairness: 0.53), 12.42 Mbps (fairness: 0.71),8.84 Mbps (fairness: 0.88), and 4.57 Mbps (fairness: 0.88), respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1041-1043
• /
• 1993

Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)＋dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.2
• /
• pp.307-315
• /
• 2012

Objectives : This study is to make basic materials for an effective human resource management plan by understanding relationship between self-esteem and intention of transfer of dental hygienists who are working in dental diagnostic institutions and to contribute to human resource program development for promoting development into a dental hygienic profession. Methods : This survey was carried out for dental hygienists who are engaging in dental diagnostic institutions in part of Cheonbuk Area by survey researchers for 10 days from September 14 to September 24, 2011 by visiting dental clinics after respondents replied to a questionnaire after listening to explanations of study purposes. Total 210 copies of questionnaire were retrieved and 201 copies were used as materials for the final analysis excluding 9 copies with insincere replies. Results : 1. The total average grade for self-esteem of study objects was 32.83(${\pm}3.08$) points. The total average of intention of transfer was found to be 32.91(${\pm}7.50$) points. 2. Self-esteem by satisfaction on the current workplaces was shown to be high with 'very satisfactory'(p=0.028), which has significant difference statistically (p<0.05). 3. In the intention of transfer by general characteristics, 20-25 years ($35.15{\pm}7.17$) was higher than over 40 years old ($23.44{\pm}3.47$) by age to show significant difference statistically (p=0.000). As for married status, single ($34.42{\pm}6.64$) was found to have higher intention of transfer than married ($30.28{\pm}8.11$), which showed significant difference statistically (p=0.018). As for the education background, 3 year course college graduates ($33.49{\pm}7.25$) showed more intention of transfer than over undergraduate students ($22.75{\pm}9.43$) to show significance statistically (p=0.002) and in the working years 1~3 years ($34.40{\pm}7.07$) was found to have more intention of transfer than over 10 years ($25.13{\pm}5.08$) to be significant statistically (p=0.000). The annual income less than 25 million won ($34.10{\pm}6.54$) showed more intention of transfer than over 40 million won ($21.00{\pm}0.00$) (p=0.000). 4. Intention of transfer by satisfaction of current workplaces was found to be high in 'very unsatisfactory', which showed significant difference statistically (p<0.001). 5. Pure correlation between self-esteem and intention of transfer came into existence and intention of transfer was found to be higher as self-esteem is higher. Conclusions : Through results as above, intention of transfer of dental hygienists was found to be higher as self-esteem is higher. Various follow-up studies which are to perform empirical verification by analyzing various factors which can affect intention of transfer based on this and using them as control variables are thought to be tried.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.18-26
• /
• 1957

There are two problems to be solved by our efforts in the enamel frit. One is how we can cover the enamel frit thin with complete milk white as possible, and the other is how it can be, made resistant for chemicals than before one. The frit which can solved the two problems just mentioned above is titanium enamel frit. This frit has been developed in America after War Ⅱ, and now the research for concerning antimony frit into titanium frit is under development entirely. In order to develope the enamel industry in Korea, it is urgent problem to convert antimony frit into titanium frit. By the way the titanium frit is emulsified titanium oxide crystal which made through reheating the supersaturated solution of titanium oxide in the basis of glass. Unfortunately, there are many obscure points in active fact or which influence on its composition and characteristics yet. However, this task was tried for the first in Korea. As first step, the test was carried on the reference books, and we can be possible convert antimony frit into titanium frit as a result of this experiment. As a conclusion, for the purpose of developing the enamel industry in Korea, we studied that the research for converting antimony enamel frit which has been used popularly into titanium enamel frit which is more economic and resistant for chemicals. As a result of experiments, the following points concerning with titanium frit have become clearly. 1. It is better when the composition of titanium enamel frit has as following table.Man Duck San Silica 24 An Yang Feldspar 20 Borax 28 Sodium Nitrate 4 Cryolite 7 Calcium Carbonate 3.6∼1 Titanium Oxide 10 Calcium phosphate 0 ∼3.2 Calcium Fluoride 0∼1.8 Antimony Oxide 0∼0.5 2. The amount of $TiO_2$, to be added is $10%\;to\;12{%,\;CaF_2\;is\;under\;1.8%,\;P_2O_5\;is\;under\;1.6%,\;Sb_2O_3\;is\;under\;0.5%$. 3. In the titanium frit, the limit of iron oxide amount to be included is under 0. 5%. 4. Comparing the titanium enamel frit with antimony enamel frit not only the titanium frit can be savely 20.6% in the price of raw materials, but one time of glazing and heating process is omitted in each case, and it is known the titanium frit is more resistant for chemicals than antimony frit.

• Nutritional Sciences
• /
• v.7 no.4
• /
• pp.247-253
• /
• 2004

This study has investigated the effect of dietary attitudes on nutritional status of nurses living in Kyungnam province. A total of 249 muses working at hospitals in the Kyungnam area participated in this study. The general characteristics and dietary attitudes of the subjects were surveyed using a self-administered questionnaire, and nutrient intakes were examined using one day 24-hour recall method from November 14 to December 20, in 2001. The data of nutrient intakes were analyzed by the Computer Aided Nutritional Analysis Program and then the diet quality was estimated using the Index of Nutritional Quality (INQ). The subjects were classified as the high score group (17.3 %), medium score group (54.2%), and low score group (28.5%) based on dietary attitude score. The results were as follows: Average age of subjects was 27.1 years old, average nursingexperience was 5.7 years, and 70.7% of the subjects graduated from a junior college. The rate of shift work (45.4%) and non-shift work (54.6%) were similar. The average score on dietary attitudes in thehigh score group was 78.8, and those in he medium score group and in the low score group were 58.6 and 40.8 out of 100 points respectively. The average intake of energy (p < 0.001), carbohydrate (p < 0.001), protein (p < 0.05), animal protein (p < 0.01), animal fat (p < 0.05), vitamin $B_1$ (p < 0.01), vitamin $B_2$ (p < 0.0l), niacin (p < 0.001), Ca (p < 0.001), Fe (p < 0.001), animal Fe (p < 0.01), P (p < 0.001), and crude fiber (p < 0.00l), were significantly higher in the high score group than those in the medium score group and low score group. In the high score group, the average intake of protein, vitamin $B_1$, niacin, vitamin C and P were above 125% of the Korean RDA, and in medium score group, those of vitamin C and P, and in low score group, that of vitamin C were above 125% of the Korean RDA. In the high score group, nutrient of intake below 75% of the Korean RDA was Ca, and those in medium score group were vitamin $B_2$, Ca, and Fe, and those in low score group were energy, vitamin $B_2$, Ca and Fe. The intake ratio of Ca and P showed an unbalanceof 1:2, and that of animal protein/plant protein, and that of animal fat/plant fat were high (1.45-1.64) in all group;. The dietary attitude had a positive correlation (p < 0.00l) with nutrition intake except vitamin A and vitamin C.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.289-300
• /
• 2001

Telomerase is a ribonucleoprotein that synthesizes telomere repeats. It has been reported that activation of telomerase was associtated with immortalization, proliferative activity and carcinogenesis. Recently, telomerase activity has been extensively studied in many kinds of malignant tumors for clinical diagnostic and/or prognostic utilities. In neuroblastoma, breast carcinoma, gastric carcinoma, non-small cell lung carcinoma, close relationship has been reported between high telomerase activity and lymph node metastasis, tumor aggressiveness and poor prognosis. The purpose of this study is to investigate the clinical implication of telomerase activity assay as an adjunctive factor in decision-making on neck node management, speedy pre-operative judging on histologic malignancy grading. Thus we performed semi-quantitative assay of telomerase activity using Telomerase PCR ELISA $kit^{(R)}$(Boeringer Manheim, Germany) and evaluated correlation between telomerase activity and tumor size, neck node metastasis, Anneroth malignancy score and influence of pre-operative chemotherapy on its activity in 27 cases of oral squamous cell carcinomas and 18 cases of normal oral epithelium. Also, correlation between telomerase activities and PCNA indices was evaluated. The results were obtained as follows: 1. The telomerase activities were detected in 24 specimens out of 27 oral squamous cell carcinoma specimens (88.9%) and in 5 specimens out of 18 normal oral epithelium specimens (27.8%). The mean value of telomerase activities was $0.9793{\pm}0.3428$ in 24 oral squamous cell carcinoma specimens and $0.4855{\pm}0.1117$ in 5 normal oral epithelium specimens. The positivity rate and mean value of telomerase activities in oral squamous cell carcinoma specimens were significantly higher than those of normal oral epithelium specimens (p<0.05). 2. There was no significant correlation between total Anneroth malignancy score and telomerase activity (p>0.05), but points of mitosis index and depth of invasion were significantly correlated with telomerase activities (p<0.05). 3. The positive immunohistochemical staining for PCNA(proliferating cell nuclear antigen) was observed in 26 specimens out of 27 oral squamous cell carcinoma specimens and mean value of PCNA indices of 26 specimens was $53.67{\pm}26.46$. PCNA indices were significantly correlated with telomerase activities (p<0.05). 4. The mean value of telomerase activities was significantly higher in pathologic T3/T4 group than in T1/T2 group (p<0.01). There was no significant difference of mean value of telomerase activities between pathologic neck node positive group and negative group (p> 0.05). Pre-operative chemotherapy significantly lowered the telomerase activities (p<0.05). The above results suggested telomerase activity could be used as diagnostic marker and adjunctive parameter for judging on histologic malignancy in oral squamous cell carcinoma.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.774-778
• /
• 1999

Tee yields, physical properties and gel formation abilities or hot-water extractable material (HWEM) and water-soluble alginate (WSA) extracted from Laminaria japonica were estimated and compared with those of the alginate (ASA) extracted with alkali solution in the routine procedure. The contents of HWEM, WSA and ASA in Laminaria japonica were 8.3, 2.5 and $19.1\%$, respectively. The HWEM and WSA had no gel formation ability, whereas the ASA had a good gol formation ability. The HWEM and WSA were almost not viscous even in $1.5\%$ of the sample solution, whereas the ASA was very highly viscous in above $0.5\%$ of sample solution. The melting points of $1\%$ solution of HWEM, WSA and ASA sample were 31, 24 and $14^{\circ}C$, respectively. The solubility at melting point of each samples varied from 2.3 to 2.6 g/100 g water, and a few differences were observed.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.193-200
• /
• 1995

It has been well known that the alkali-aggregate reaction between the aggregates and cement paste is one of the reasons of a concrete siructre expansion. Because of a serious demage on the concrete stnicture from the expansion, in many countries, the safety of the materials is checked in laboratory by mortar-bar test and the upper limit of expansion in length is 0.1%. The prescriptions are presented in the ASTM C227 and 490 of U.S. which has been international currency and in the KS Handbook F2503, F2546 and L5107 of Korea published by Korean Standards Association. Both of the prescriptions are almost same in their contents. Actually, in the process of preparing and measuring the mortar-bar according to the prescription mentioned above, it seems that there are no problems for its own purpose but a few points are found to be improved upon the methods to increase the accuracy for laboratory work as follows. 1. The prescription of blending ratio(aggregate, cement and water) should be noted by volume not by weight. 2. It is unreasonable to measure the initial length of mortar bars after 24$\pm$2 hours at once regardless the kind of aggregates. 3. It may bring about errors in calculating the expansion ratio under the condition of the denominator value fixed as 254mm. 4. The measuring methods of specific gravity are selected according to the purposes but the pure specific gravity displays the highest accuracy among them.