• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.64-69
• /
• 2016

A new compact conformal dome optical system was established, and the aberration characteristics of the dome were investigated using Zernike aberration theory. The aberrations induced by the dome at different fields of regard (FORs) from 30° to 100° were effectively balanced by a rotating cylindrical lens. This kind of optical system can be widely used in top-view optical searching devices. A design method was introduced and the optimization results analyzed in detail. The results showed that the Zernike aberrations produced by the conformal dome were decreased dramatically. Also, a complete conformal optical system was designed, to further illustrate the aberration correction effect of the rotating cylindrical lens. Using a cylindrical lens not only provided a large FOR, but also simplified enormously the structure of the conformal optical system.

• 한국측량학회지
• /
• 제29권5호
• /
• pp.519-525
• /
• 2011

High-resolution earth-observing satellites acquire substantial amount of geospatial images. In addition to high image quality, high-resolution satellite images (HRSI) provide unprecedented direct georegistration accuracy, which have been enabled by accurate orbit determination technology. Direct georegistration is carried out by relating the determined position and attitude of camera to the ground target, i.e., projecting an image point to the earth ellipsoid using the collinearity equation. However, the apparent position of ground target is displaced due to the atmosphere and satellite velocity causing significant georegistration bias. In other words, optic ray from the earth surface to satellite cameras at 400~900km altitude refracts due to the thick atmosphere which is called atmospheric refraction. Velocity aberration is caused by high traveling speed of earth-observing satellites, approximately 7.7 km/s, relative to the earth surface. These effects should be compensated for accurate direct georegistration of HRSI. Therefore, this study presents the equation and the compensation procedure of atmospheric refraction and velocity aberration. Then, the effects are simulated at different image acquisition geometry to present how much bias is introduced. Finally, these effects are evaluated for Quickbird and WorldView-1 based on the physical sensor model.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.604-613
• /
• 2015

An unobstructed off-axis two-mirror system is presented in this paper. First a suitable initial configuration is established based on third-order aberration theory. In order to achieve a wide field of view (FOV) with high image quality , the diffractive mirror is adopted in the two-mirror system to increase the optimization freedom and the aberration relationship between diffractive phase coefficients and Zernike coefficients is derived. Furthermore, a complete comparison design example with a focal length of 1200 mm, F-number of 12, and FOV of 40° × 2° is given to verify the aberration correction ability of the diffractive mirror. The system average wavefront error is 0.007 λ (λ=0.6328 μm) developed from 0.061 λ when the system didn’t adopt the diffractive mirror. In this system the phase modulation function of the diffractive mirror is established as an even function of x, so we could obtain a symmetrical imaging quality about the tangential plane, and the symmetric aberration performance also brings considerable convenience to alignment and testing for the system.

• 한국광학회지
• /
• 제13권4호
• /
• pp.275-282
• /
• 2002

2매 접합렌즈와 단렌즈로 구성된 2군 렌즈계의 구면수차, 코마, 종색수차 보정을 위한 3차수차 전개식을 얇은렌즈 근사를 이용하여 해석적으로 유도하였다. 유도된 3차수차 전개식은 telephoto렌즈계의 설계에 적용되었다. 초기설계에서 광학유리 조합은crown-flint-crown조합과 flint-crown-flint 조합에 관하여 조사하였다. Crown-flint-crown조합의 경우 2가지 형태의 achromatic aplanat 존재하였다. Flint-crown-flint조합의 경우에서도 2종류의 해가 존재하였으나, 해의 형태가 유용하지 못하였다.

• 한국안광학회지
• /
• 제7권1호
• /
• pp.63-67
• /
• 2002

본 논문에서는 기존에 설계되어진 meniscus negative outer element를 이용한 광각을 담당하는 렌즈계를 선택하여 광학적 성능을 분석하였다. 본 광학계의 특성은 오직 하나의 outer negative element만을 갖는 구조로 넓은 시야를 제공하고, 두 개의 면을 비구면화함으로서 수차보정을 하여 렌즈 사용량을 줄여 소형화와 경량화의 장점을 살린 compact한 광학계라고 할 수 있겠다. 또한 수차보정에 사용된 2개의 비구면의 형태를 조사함으로써 비구면의 수차보정 특성을 알아보았다.

• 전자공학회논문지
• /
• 제50권9호
• /
• pp.119-126
• /
• 2013

본 논문은 영상 획득 장치에서 발생하는 색수차를 영상의 국부적 특성을 고려하여 보정하는 알고리즘을 제안한다. 색수차는 파장에 따른 렌즈의 회절률 차이로 인해 발생하며, 그 결과 영상의 강한 에지 영역에서 RGB 채널이 어긋나 색 결함이 생기게 된다. 제안하는 알고리즘은 이러한 색수차가 발생하는 특성을 이용하여 먼저 영상의 에지 영역과 그 주변부를 색수차가 발생되는 영역으로 검출한다. 이 후, 검출된 에지 영역에서 RGB 채널의 에지를 일치시키는 방법을 이용하여 색수차를 제거한다. 그 결과 기존의 색수차 제거 방법으로 널리 사용되는 전역적인 영상 와핑 방법으로는 제거하지 못하는 축상 색수차와 이미징 센서로부터 발생하는 purple fringing 결함까지도 저감시킬 수 있다. 실험 결과를 통해 제안하는 방법이 기존 방법에 비해 수치적인 면과 시각적인 면에서 뛰어난 결과를 보임을 확인할 수 있다.

• 한국광학회지
• /
• 제26권4호
• /
• pp.217-225
• /
• 2015

본 논문에서는 이중 색지움 렌즈와 삼중 색지움 렌즈의 종색수차 보정식을 이용하여 가시광선 전대역에서 수차를 보정할 수 있는 유리 조합을 연구하고 수차가 보정된 두 렌즈를 결합하여 산업 현장에서 광범위하게 이용되고 있는 비전검사용 텔레센트릭 렌즈를 설계하였다. 그 결과 매우 넓은 파장대역 380 nm ~ 780 nm에서 파면수차를 $0.057{\lambda}$ 를 갖는 광학적 성능을 확보하였으며, 이는 기존에 시판중인 486.1 nm ~ 656.2 nm에서 수차가 보정된 텔레센트릭 렌즈들보다 우수하다는 것을 볼 수 있었다.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.590-595
• /
• 2014

We have investigated anamorphic prism lenses with distortions of 0.3-0.5%. We designed the plastic triangular lens and confirmed the minimum resolution using MTF graphs. Also we confirmed that the SVGA optical system can realize a resolution of $864{\times}648$ 56 megapixels. A distortion of about 0.5% aberration appears in the maximum field, and a finite beam aberration of about $15{\mu}m$ is confirmed. We made a mold based on the design data and completed the prism lens through exodus molding. We confirmed the shape error (< $30{\mu}m$) and surface roughness (> 40 nm) of the three sides. We made the video-information-display prototype glasses using prism lens by measuring the performance, we determined the distortion aberration (0.3%) and SVGA resolution. Our approach will enable fabrication of a portable large-screen display device for glasses and sunglasses for the domestic market and, after 2015, for the world market.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.340-344
• /
• 2011

Airborne infrared techniques have been used in wild land fire management for decades. This paper describes a kind of infrared scanning system based on a rotating drum with a tilted porthole underside the plane nose. This design increases the stability of the mechanism system, reduces air resistance and protects inner parts. Aberration characteristics of a tilted ellipsoid porthole are analyzed and an effective solution is invented which makes the system achieve $30^{\circ}$ field of regard. The system's ultimate value of modulation transfer function is near the diffraction limit, which indicates that the performance of the rotating optical system meets the imaging requirements.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.811-816
• /
• 2011

We develop a plastic object lens for blu-ray disc playing pick-up module as morethan 0.85 numerical aperture in this research. We design plastic object lens for blu-ray disc playing pick-up module's each factor's in balanced and made our designed lens by injection molding. Furthermore, by correction designing in mold-core, we optimization our lens efficiency as world grade; wave front aberration $0.028{\lambda}$. RMS, light axis differential 0.3967arcmin. We can manufacture localized blu-ray disc's pick-up lens's component and by this fact we obtain international competitiveness. The result of this research will be very helpful to develop a single objective lens for 3 different wavelength of laser diodes in playing and recording pick-up module.