• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.79-86
• /
• 2017

In this paper, we implement a common module that can integrate multiple biometric information for integrated patient monitoring system. Conventional biomedical instruments have many devices attached to each patient, making it difficult to monitor abnormality signs of many patients in real time. In this paper, we propose a module for an integrated monitoring system that can perform centralized monitoring using a common module that integrates multiple measurement devices. A protocol for sending and receiving packets between the measuring device and the common module is designed, and the packets transmitted through the network are stored and managed through the integrated monitoring system and provide information to various users such as medical staff. The results of this study are expected to contribute to the management of patients and efficient medical services in hospitals.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.87-93
• /
• 2017

In this paper, we design a small low power single channel ECG(Electrocardiogram) system of Chest Belt type with fiber-type electrodes to measure emotional state change of game addict. HRV(Heart Rate Variability) is analyzed through heart rate signal measurement and the psychological stress state is judged by using it. And it verifies its effectiveness through prototype. First, we design HR measurement module through low power MCU(Micro Controller Unit) and implement prototype level measurement system. The results showed that the difference between the addiction group and the general group was confirmed and that the system was effective. The result of this study can be used for health management such as reduction of stress of the user through music and breathing that lowers the stress by detecting the stress state of the general person or the chronic ill person.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.3-8
• /
• 2006

This paper discusses current challenges, as a result of the rapid increase in air travel, and future navigation needs of Civil Aviation. The objectives pursued by ANASTASIA, a sixth framework European Commission project, are presented. The methods used in the derivation of the navigation performance requirements are introduced and discussed in the context of precision approaches. High-level impacts on the avionics receiver of integrating additional multi-frequency ranging signals from a modernized GPS and Galileo into the current navigation architecture are investigated. Expected performance achievements are presented.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.81-86
• /
• 2014

In the development of an avionics system, there is a trend of using commercial-off-the-shelf(COTS) equipments in order to reduce the development cost and time. In this paper, we present an implementation of an aircraft mission computer using the objected oriented software and the COTS equipments. We execute the aircraft guidance software on the system, and measure the calculation time and the used memory. To compare the guidance capability of the software program, we implement the same software logic on DS1104 system. The guidance software program executed on two different systems resulted in the almost identical simulation.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.119-125
• /
• 2001

This paper discuss the Qualification Test Procedure which is composed of main functional and environmental tests for the localizing avionics and subsystems, especially the detail test approaches of General Avionics Computed(GAC) through the analysis of related technical data packages for the purpose of performance proof of final products. Quality assurance procedures are properly established with the several kinds of inspections and functional test items. They are called as process inspections, functional test, acceptance test procedure and qualification test procedure. The Qualification test procedure are composed of the analysis of original engineering design concept and shall be performed for the acquisition of the certification of the GAC's quality as well as the aquisition of the related techniques and engineering know-how items.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.884-889
• /
• 2000

본 논문에서는 원영상의 주파수특성 성형에 의한 오차확산 영상이진화 기법을 제안하였다. 오차확산에 의한 영상이진화 처리에서 이진화영상에 내재하고 있는 에지정보의 열화를 감쇄하기 위한 방법으로 원영상의 주파수특성을 활용하는 기법을 도입하였다. 주파수특성은 원영상에서 수평방향과 수직방향으로 얻고, 이들 각각에 가중치를 부여하였다. 수평과 수직의 주파수특성을 성형한후, 영상이진화 기법에서 양자화처리 수행시 이를 활용하였다. 주파수특성 성형을 위한 필터는 2종을 제안하여 적용하였다. 제안한 필터를 적용한 오차확산 영상이진화 처리를 수행한 후, 실험결과를 고찰시 이진화영상의 평탄영역은 기본특성을 유지하면서 에지정보의 특성이 부각되는 주관적인 화질특성이 얻어짐을 확인할 수 있었다.

• Journal of Applied Reliability
• /
• v.18 no.2
• /
• pp.184-191
• /
• 2018

Purpose: The purpose of this study is to propose a method to calculate the optimal preventive maintenance cycle of radar used in the aviation weapon system of ROKAF. Methods: A hybrid model is used to estimate the optimal preventive maintenance cycle in a system that can perform condition based predictive maintenance (CBPM) through continuous diagnosis. The failure data of the radars operating in the military were used to calculate the reliability. Results: According to the research results, the reliability threshold of the radar began to decrease after 5 flights, and decreased rapidly after 12 flights. Since the second check, costs have continued to decline. Conclusion: A method is proposed to determine the cycle of optimal preventive maintenance of radar within operational budget through modeling results between reliability limit and cost for radar. The results can be used to determine the optimal preventive maintenance cycle and frequency of various avionics equipment.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.35-36
• /
• 2020

본 연구는 TA-50 항공기 임무컴퓨터에서 JDAM을 가상으로 운용하는데 필요한 소프트웨어 개선 내용 중 가상 JDAM 무장 투하 구역 계산 방법을 제안한다. 이 연구에서 제안한 무장투하구역 알고리즘은 FA-50 JDAM DLZ에서 추출한 무장투하구역 입/출력값을 tensorflow를 사용하여 학습한 알고리즘이다. 이 연구를 통해 제안한 가상 JDAM DLZ 알고리즘을 사용할 경우 실제 무장을 장착하지 않은 항공기에서 가상으로 JDAM 무장 투하 구역 표시가 가능하고, 조종사는 가상의 JDAM DLZ를 참고하여 무장 투하 훈련을 수행할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.485-486
• /
• 2023

4차 산업혁명 이전에도 많은 물류 자동화가 이루어지고 있었다. 그러나 4차 산업혁명이 도래하면서 자동화되는 범위가 더욱 넓어지며 인력이 쓰이는 곳에 로봇이 대거 등장하게 되었다. 그러나 환경이 열악한 중소기업이나 경제성 측면에서의 도입이 어려운 분야에서는 자동 물류 시스템의 적용이 어려운 것이 현실이다. 본 논문에서는 이러한 문제를 해결하기 위해 물건을 옮기는 일에 있어서는 라인트레이서를 이용하여 물품의 수송을 도와주고, 적외선 센서 및 바코드 리더기를 이용하여 물품 개수의 현황 계산을 담당하여 정확한 계산을 도출하여 자동으로 원격 데이터베이스에 저장하여 관리할 수 있는 물류관리 지원 시스템을 제안한다.