• Information and Communications Magazine
• /
• v.30 no.6
• /
• pp.69-76
• /
• 2013

최근 홈 네트워크/정보가전 기술의 비약적인 발전과 고품질 멀티미디어 콘텐츠의 보급으로 인해 네트워크 기반의 멀티미디어 전송 시스템에 대한 요구가 증가하고 있다. 이러한 요구로 인해 고품질 오디오, 비디오 데이터를 이더넷 (Ethernet) 망을 이용하여 실시간 전송할 수 있는 Audio Video Bridging(AVB) 기술이 IEEE에서 표준화 되었다. AVB 기술은 네트워크를 통해 오디오 및 비디오 데이터뿐만 아니라, 각 장치들의 제어/관리를 위한 데이터도 동시에 전송할 수 있는 기술이다. 기술 개발 초기에는 네트워크 및 오디오 전문 업체를 중심으로 오디오 전송에 특화된 AoE(Audio over Ethernet) 기술 개발이 주를 이루고 있었으나, AVB 표준화가 완료된 2011년 이후부터 AVB가 적용된 제품이 개발되고 있다. 이에 본 고에서는 네트워크를 통해 멀티미디어 데이터를 전송할 때 필요한 핵심 요소기술과 개발 동향에 대해 살펴보고, IEEE 표준인 AVB 기술에 대해 알아본다.

• Journal of Internet Computing and Services
• /
• v.17 no.4
• /
• pp.11-17
• /
• 2016

In this paper, we proposed a multi-viewer system with multiple HD cameras based AVB(Audio Video Bridge) ethernet cable using IP networking, and FPGA(Xilinx Zynq 702) for bus safety systems. This AVB (IEEE802.1BA) system can be designed for the low latency based on FPGA, and transmit real-time with HD video and audio signals in a vehicle network. The proposed multi-viewer platform can multiplex H.264 video signals from 4 wide-angle HD cameras with existed ethernet 1Gbps. and 2-wire 100Mbps cables. The design of Zynq 702 based low latency to H.264 AVC CODEC was proposed for the minimization of time-delay in the HD video transmission of car area network, too. And the performance of PSNR(Peak Signal-to-noise-ratio) was analyzed with the reference model JM for encoding and decoding results in H.264 AVC CODEC. These PSNR values can be confirmed according the theoretical and HW result from the signal of H.264 AVC CODEC based on Zynq 702 the multi-viewer with multiple cameras. As a result, proposed AVB multi-viewer platform with multiple cameras can be used for the surveillance of audio and video around a bus for the safety due to the low latency of H.264 AVC CODEC design.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2015

In this paper, we designed an embedded audio video bridging (AVB) platform based on IEEE 802.1BA for real-time multimedia transmission in smart-car, smart-home, smart-theater, and then evaluated a performance of the implemented platform by analysis of IEEE 802.1AS (time synchronization protocol) and IEEE 802.1Qat (stream reservation protocol). Especially, the AVB Layer-2 protocol of MRP(Multiple Registration Protocol), MMAP(Multicast Address Acquisition Protocol), IEEE 1722, 1722.1 etc. was and implemented by linux based operating system. It is shown by interoperability tests with commercial products that the implemented platform transmits real-time multichannel AV data over AVB networks for Multichannel Multimedia Transmission.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.81-85
• /
• 2009

본 논문은 VoIP, IPTV, VoD 등의 실시간 서비스 품질을 네트워크 노드에서 모니터링함으로써네트워크에서 발생한 품질이상을 분석할 수 있는 스위치 칩을 설계하였다. 인터넷 서비스의 특성상 단대단 서비스에 기반한 실시간서비스는 품질이상이 발생한 위치를 정확하게 분석할 수 없기 때문에 유지보수에 어려움이 있다. 이러한 문제를 해결하기 위해 본 논문에서는 실시간서비스에 해당하는 플로우를 등록하고 해당 플로우가 장치내에서 발생한 패킷손실, RTP 시퀀스 넘버를 참조하여 이전 장치에서의 패킷손실, 패킷의 IAT(Inter Arrival Time), 대역폭, 그리고 장치내 지연을 실시간으로 측정할 수 있는 기능을 가진 AVB(Audio/Video Bridge)칩을 구현하기 위해 IEEE802.1AS를 기만한 시간동기 프로토콜의 정확성을 시뮬레이션하고, FPGA를 이용하여 구현한 AVB 스위치칩에서 타임스템프의 정확성을 확인함으로써 실시간서비스의 품질을 네트워크에서 실시간으로 모니터링 할 수 있는 가능성을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.3025-3047
• /
• 2021

This paper presents the latest Ethernet standardization of in-vehicle network and the future trends of automotive Ethernet technology. The proposed system provides design and optimization algorithms for automotive networking technology related to AVB (Audio Video Bridge) technology. We present a design of in-vehicle network system as well as the optimization of AVB for automotive. A proposal of Reduced Latency of Machine to Machine (RLMM) plays an outstanding role in reducing the latency among devices. RLMM's approach to real-world experimental cases indicates a reduction in latency of around 41.2%. The setup optimized for the automotive network environment is expected to significantly reduce the time in the development and design process. The results obtained in the study of image transmission latency are trustworthy because average values were collected over a long period of time. It is necessary to analyze a latency between multimedia devices within limited time which will be of considerable benefit to the industry. Furthermore, the proposed reliable camera and video streaming through optimized AVB device settings would provide a high level of support in the real-time comprehension and analysis of images with AI (Artificial Intelligence) algorithms in autonomous driving.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.483-484
• /
• 2009

IEEE 802.1 AVB는 LAN 상에서 동작하는 장치들의 시간을 동기화하고 저지연 스트리밍 서비스를 제공하기 위한 기술이다. 연구 중인 세부 표준 중에서도 IEEE 802.1Qav는 시간/손실에 민감한 스트림의 전달을 담당하는 표준이다. 현재 유선망에서의 프레임 전달 방법은 draft 버전 6에 이르러 거의 완성되어 가지만, 아직까지 무선망에 대한 표준은 정의되지 않고 있다. 따라서, 본 논문에서는 AVB 규격을 지원하는 무선망에서의 PCF 기반의 프레임 전달 방법을 제시한다.

• Review of Korean Society for Internet Information
• /
• v.16 no.1
• /
• pp.23-27
• /
• 2015

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.543-547
• /
• 2005

Organic electroluminescence devices were made from 1,4-bis-(9-anthrylvinyl)benzene (AVB) and 1,4-bis-(9-aminoanthryl)benzene (AAB) anthracene derivatives. Device structure was ITO/AVB/PANI(EB)/Al (multi-layer device) and ITO/AAB:DCM/Al(single-layer device). In these devices, AVB, polyaniline(emeraldine base) (PANI(EB)) and AAB were used as the emitting material. 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H -pyran(DCM) was used as red fluorescent dopant. We studied change of fluorescence wavelength with concentration of DCM doped in AAB. The ionization potential (IP) and optical band gap (Eg) were measured by cyclic voltammetry and UV-visible spectrum. We compared with difference of emitting wavelength between photoluminescence and electroluminescence spectrum. In case of the multi-layer device, PANI and AVB EL spectra have similar wave pattern to each PL spectrum and when PAM and AVB were used at the same time, and multi-layer device showed that a balanced recombination and radiation kom PANI and AVB. In case of the single-layer device, with the increase of DCM concentration, the blue emission decreases and red emission increases. This indicates that DCM was excited by the energy transfer from AAB to DCM or the direct recombination at the dopant sites due to carrier trapping, or both. The device with $1.0wt\%$ DCM concentration gave white light.

• Genomics & Informatics
• /
• v.10 no.2
• /
• pp.110-116
• /
• 2012

Recent several studies have shown that the genetic variation of SCN5A is related with atrioventricular conduction block (AVB); no study has yet been published in Koreans. Therefore, to determine the AVB-associated genetic variation in Korean patients, we investigated the genetic variation of SCN5A in Korean patients with AVB and compared with normal control subjects. We enrolled 113 patients with AVB and 80 normal controls with no cardiac symptoms. DNA was isolated from the peripheral blood, and all exons (exon 2-exon 28) except the untranslated region and exon-intron boundaries of the SCN5A gene were amplified by multiplex PCR and directly sequenced using an ABI PRISM 3100 Genetic Analyzer. When a variation was discovered in genomic DNA from AVB patients, we confirmed whether the same variation existed in the control genomic DNA. In the present study, a total of 7 genetic variations were detected in 113 AVB patients. Of the 7 variations, 5 (G87A-A29A, intervening sequence 9-3C>A, A1673G-H558R, G3578A-R1193Q, and T5457C-D1819D) have been reported in previous studies, and 2 (C48G-F16L and G3048A-T1016T) were novel variations that have not been reported. The 2 newly discovered variations were not found in the 80 normal controls. In addition, G298S, G514C, P1008S, G1406R, and D1595N, identified in other ethnic populations, were not detected in this study. We found 2 novel genetic variations in the SCN5A gene in Korean patients with AVB. However, further functional study might be needed.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.112-119
• /
• 2008

Today, A matter of concern of home network technology increase. The standard of communication between home network devices are required. IEEE 802.1 AVB(Audio/Video Bridging) specifies transmission method for time-sensitive data between these devices using Ethernet in bridged local area networks. IEEE 802.1 AVB and IEEE 1588 PTP(Precision Time Protocol) have various message type for grandmaster selection and synchronize the devices. These messages bring on complexity protocol. We propose a method that uses Single TimeSync frame in order to the problem. Our proposal is appropriate process complexity and low transmission delay for home network by using the TimeSync frame. Furthermore, after all devices are adjusted to the single TimeSync frame, a resource reservation, a forwarding and queueing rule are needed for a time-sensitive application.