• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.1083-1096
• /
• 1997

To implement satellite B-ISDN/ATM network, it needs to gurantee reliable transport via satelite in the poor BER environment. So, it requires to use channel coding (FEC:Forward Error Correction) schemes for improvement of BER performance, but these coding effects evoke burst errors and degradation of the QoS. Therefore we have to investigate new algorithm that compensates these weaknesses. We consider convolutional coding and concatenated coding among FEC schemes as FEC for satellite transmission and choose different compensational algorithm by the error characteristics of the using type of FEC. In using concatenated coding, this paper proposes the satellite system structure for interconnection to the terrestrial network and proposes the channel coding algorithm for improvement of transmission performances. We execute performance evaluation of the proposed algorithm by computer simulation. In detail, we propose 4 types of application ATM cell to the block coding(Reed-Solomon) and propose the new 55 byte ATM cell that enforces the error correction capability of cell header by the BCH coding. Then we propose the outer interleaverand the cell unit interleaver that evoke maximum coding effect of BCH code.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.289-440
• /
• 1998

This paper describes an interconnection network structure which transports information among processors through a high speed ATM switch. To efficiently use the high speed ATM switch for the message-based multiprocessor, we implemented the cell router that performs multiplexing and demultiplexing of cells from/to processors. In this system, we use the expanded internal cell format including 3bytes for switch routing information. This interconnection network has 3 stage routing strategies: ATM switch routing using switch routing information, cell router routing using a virtual path identifier (VPI) and cell reassembly routing using a virtual channel indentifier (VCI). The interconnection network consists of the NxN folded switch and N cell routers with the M processor interface. Therefore, the maximum number of NxM processors can be interconnected for message communication. This interconnection network using the ATM switch makes a significant improvement in terms of message passing latency and scalability. Additionally, we evaluated the transmission overhead in this interconnection network using ATM switch.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.390-393
• /
• 2003

In this paper, we study on an implementation of cell scheduler which arbitrates the ATM exchange efficiently and swiftly. The designed ATM cell scheduler of this paper is based on iSLIP scheduling algorithm. It is aimed at the high-speed implementation. The implemented cell scheduler approximately provides 100% throughput for cell scheduling. We present a basic structure for cell scheduler and describe by using the HDL and perform behavior level and timing simulation. The cell scheduler of this paper is designed to support 8-port switch fabric and can expand in 32-port switch fabric. The cell scheduler for supporting the 8-port switch fabric is designed in 2-stage pipelines for the grant and accept stages respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.4
• /
• pp.14-19
• /
• 2005

In general, cell transmission delay is more sensitive for real time video service rather than cell losses in a wireless ATM network. Existing handoff schemes, which are emphasizing the prevention of cell losses, have limitations in cell transmission delay to satisfy QoS. In this paper, we propose a scheme to minimize transmission delay generated during the handoff and to maintain the sequence of cells. Transmission delay can be reduced by transmitting ATM cells with low CLP(i.e., CLP=0) prior to others and by discarding cells with high CLP(i.e., CLP= 1). The simulation results show that the proposed scheme is suitable for delay sensitive real time VBR service as well as fast handoff by giving high CLP to less meaningful MPEG frames.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2179-2187
• /
• 1999

To privide multimedia mobile communication services for the users in scattered locations, the application ATM cells efficiently in wireless communications, it is effective to the use TDMA method. However, it is necessary to have methods to compensate the CDV(cell delay variation) caused by the difference between TDMA-ATM and cell stream multiplexing of the users. This paper optimizes the cell control time(Tc) when VBR traffic inputs have MMPP by applying CDV characteristics of time stamp method, which has the most advantages among compensation methods of CDV. This paper suggests a cell stream multiplex method employing time stamp techniques to reduce CDV for wireless suggest method shows that CDV distribution and cell stream multiples rangd can be controlled to 1.2${\times}$Tc which reduced over the VBR service in the TDMA-WATM transmission. This paper also presents evaluation of the suggested architecture obtained simulation.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.14-26
• /
• 2011

In this paper, we've studied Optical Fiber Subscribe Transmit system. After receiving the ATM cell passing through the FIFO of the Asynchronous Transfer Method from the ATM Layer images to the VC4 signal payload passing through scrambling of the cell payload, HEC computation of the cell and inserting the Idle/Unassigned cell. At this time formed VC4 signal passing through the generating and inserting POH overhead at the same time indicating the start point of the cell by the H4 byte on the VC4 POH. This ATM cell transmits 155Mbps speed changing the optical signal after outputting the frame format at the STM-1 signal generation block through the AUG bus after generating J1 of the VC4 start point at the AU4 pointer generation block.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.22-28
• /
• 1999

The existing CREG-VP, a technique to compensate the successive cell losses caused by traffic congestion using the FEC method on the Vp, has the merits of the short average encoding decoding time and the compatibility with the ATM standard cell format, but it has the restriction in the number of regenerable cells. In this thesis, we propose a scheme to efficiently regenerate the cell losses even in the burst traffic property by the expansion of the CREG-VP. The proposed scheme improves the detection capability of the lost cells by changing the CRP and the regeneration performance of the successive cells by using the interleaved parity cell. The simulation result shows that the proposed method produces much improvements compared with the existing ones in the cell loss rate reduction factor.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.1-5
• /
• 1999

An ATM switch is the basic component of an ATM network, and its functioning is to switch incoming cells arriving at an input port to the output port associated with an appropriate virtual path. In case of an ATM switch with buffer sharing scheme, the performance analysis is very difficult due to the interactions between the address queues. In this paper, the influences of the degree of traffic burstiness and some traffic routing properties are investigated by using the simulation. Also, some cell access strategies including priority access and cell dropping are compared in terms of cell loss probability.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2764-2771
• /
• 1999

ATM has recently received much attention because of its high capacity, its bandwidth scalability, and its ability to support multiservice traffic. However, ATM is connection oriented whereas the vast majority of modern data networking protocols are connectionless. The alternative to support current service on ATM will be a router with attached switching hardware that has the ability to cache routing decisions. In this paper, we described the router using a switch and simulated the performance. From the results of the simulation, the routing delay was decreased as the number of flow channels. Cell-delay was shortest at 30,000 cell-time when the keeping time of a flow channel was. The line utilization was rapidly decrease when a flow-setup time is 20 30 cell-time. The results of this simulation could be applied to predict the performance of the router using ATM switch.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.512-522
• /
• 1996

To provide broadband ISDN service for the users in scattered locations, the application of satellite communications network is seriously considered. To trans mit ATM cells efficiently in satellite communications, it is effective to use TDM A method. However, it is necessary to have a method to compensate the cell delayvari-ation caused by the difference between TDMA and ATM. This paper optimized the cell control time(Tc) when traffic inputs have poisson or markov modulated poisson process by applying cell delay variation characteristics of time stamp method, which has the most advantages among compensation methods or cell delay variation. This paper also intorduces a method of reducing the cell clumping phenomena by adapting discrete time stamp method, including the analysis and evalutation of the range of required quality of CDV distribution by ATM transmission.The result of the experiment shows that CDV distribution-range can be controlled to 1.2$\times$Tc which reduces overall cell delay variation by discrrete time stamp method.