• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.4
• /
• pp.188-200
• /
• 2002

The WRR scheduling algorithm is widely used in ATM networks due to its simplicity and the low cost of hardware implementation. It guarantees minimum cell rate according to the weight of each queue. The fairness is a important factor for ABR service. That is, scheduling algorithm allocates network resources fairly to each VC. However, WRR algorithm shows worse performance on bursty traffic. Because it schedules input traffics according to predetermined weight, it can not satisfies fairness criteria, MCR plus equal share and Maximum of MCR or Max-Min share, defined by ATM Forum TM 4.1 specification. The Nabeshima et al algorithm is not adapt to network status rapidly because it is not compensate the weights of unused bandwidth to VCs and assign the unused bandwidth to VCs by RR method. In this paper, we propose a scheduling algorithm for satisfying the two fairness criteria, MCR plus equal share and Maximum of MCR or Max-Min share, among the six criteria defined by ATM Forum TM 4.1 specification. The WRR, Nabeshima et al, and the proposed scheduling algorithms are compared with respect to fairness and convergence time throughout experimental simulation. According to the simulation results, the proposed algorithm shows higher fairness and more rapid convergence than other algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1910-1916
• /
• 1999

This paper suggested to solve ATM switch performance and service rate which was input buffer managed scheme in ATM network with burst traffic characteristics, For this purpose, ATM multiplexer is prepared before sending for handling burst random input traffic to multiplex and then sort based on cell inter-arrival time and cell processing due time which had been marked after that. The server looks for cell header with the most shortest due time and sends it, thus it is satisfied that real time traffic for instance CBR and rt-VBR was guaranteed cell processing time to send fast than non real time traffic. For analysis of ATM switch performance with cell processing due time and priority, each output port has divided into four different virtual buffer and each buffer has assigned different cell inter-arrival time and processing due time according to ATM Forum for example CBT/rt-VBR, nrt-VBR, ABR and UBR and showed it’s optimal service parameters then analyzed service rate behaviors according to each traffic characteristics.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.173-178
• /
• 2004

A network of Asynchronous Transfer Mode (ATM) will be required to carry the traffics(CVR, VBR, UBR. ABR) generated by a wide range of services ATM services the Quality-of-Service (QoS) management of traffice sources and bandwidth. Besides efficiency and throughput, the security services are achieved in the traffic sent in ATM network. In this paper, the scheduler evaluate and the packets sent in ATM security group. The scheduler transmits the safty packet, drop the unsafty packet and evaluate mark packet as the requirement of the delay. In this paper, we propose the scheduling algorithm of mark packet which evaluates the packet. The suggested model performance of the firewall switch is estimate simulation in terms of the delay by computer.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.3
• /
• pp.71-86
• /
• 1996

In this paper we propose an explicit rate allocation algorithm for ATM(Asynchronous Transfer Mode) Networks using the available bit rate(ABR) class of service and study the performance of this algorithm. We examine the behavior of ABR traffic with the suggested algorithm, and demonstrate that the algorithm is fair and maintains network efficiency with low cell loss rate. The simulation results show substantial improvements in fairness and efficiency over the existing algorithms.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.79-82
• /
• 1998

This paper proposes the MAC scheme based on variable reservation slots for the guaranteed QoS of ATM services on RF and evaluates the performance. This scheme has improved the utilization of channel and success ratio of reservation by using the variable number of RES(REServation) slots according to the collisions. It is the results of performance evaluation that the CTD of CBR Service is 7.9ms with overall $load(\rho)$ 85%. And also VBR service of it is 3.5ms, ABR service of it is 9.8ms with overall load 85%.

• Annual Conference of KIPS
• /
• 2000.04a
• /
• pp.440-446
• /
• 2000

초고속통신의 실현과 다양한 멀티미디어 서비스를 위한 해결책으로서 ATM이 널리 사용되고 있다. TCP가 ATM망의 ABR/UBR 서비스를 사용할 때, ABR/UBR 제어방식과 TCP 흐름제어 사이의 서로 다른 동작 때문에 TCP 파라미터 값이 TCP층의 성능뿐만 아니라 ATM 층에도 영향을 미쳐 처리율과 공정성의 성능저하를 가져온다. 본 논문에서는 효과적인 처리율과 공정성의 관점에서 실제 통신망을 고려하여 VBR서비스 상에서의 TCP 트래픽의 성능향상을 위해 효과적인 파라미터 제어운용 방안을 제시하고, 시뮬레이션 결과를 통해 개선된 높은 처리율과 공정성을 나타내었다.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.119-125
• /
• 2000

A network of Asynchronous Transfer Mode (ATM) will be required to carry the traffics(CVR, VBR, UBR, ABR) generated by a wide range of services. The algorithm of WRR cell multiplexing is designed to serve no only CBR, VBR traffic but also ABR, UBR traffic in ATM. BSW algorithm was Proposed to carry on manage buffer efficiently at implementing of WRR scheduler. But, BSW a1gorithm cause serious degradation to the weight of each VC and the ratio of scheduler throughput because it allocates more weight than the weight allocated actually in VC and because it could not serve cell if the VC queue is empty. In this paper, we propose the WRR scheduling algorithm of BSW structure which improves the cell service ratio and cell delay. The proposed algorithm is capable of maintaining an allocated VC's weight correctly and decrease of average cell delay by serving other VC cell when empty in each VC queue and increase of cell service ratio as a whole.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1890-1906
• /
• 1997

A new ER feedback switch control algorithm, called EMRCA(Explicit Max-min Rate Control Algorithm), to control the ABR services traffic in the ATM networks, is proposed in this thesis. This scheme was interpreted the ACR variation residing on between a transient state and a stable state using the two thresholds that is the $TH_{high}$ and $TH_{low}$ in the queue to detect switch nodes congestion, and decreased the difference of minimum and maximum ACR all active connection to enhance the line bandwidth utilization. The proiposed scheme used a minimum and maximum rate of all active connections to select the connection whose the congestion rate inveoked, and uses a congestion detection mechanixm to prevent some potential cogestion by regulating selected contection.s The EMRCA scheme showed ACR variation more stable that the EPRCA scheme, also reduced buffer size of the switch, and achieved higher link utilization than the EPRCA scheme.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.122-133
• /
• 1998

The CL network fer CBDS(Connectionless Broadband Data Service) defined by ITU-(International Telecommunication Union-Telecommunication) consists of CL(ConnectionLess) servers which route frames and links which connect between CL user and CL server or between CL servers[1][2]. In this configuration, two kinds of congestion, CL link congestion and CL server congestion may occur. Therefore this paper has proposed the scheme that can deal with the above congestion state of LAN traffic efficiently in interworking LANs in ATM network. Proposed schemes ale link-by-link scheme and hybrid scheme. Link-by-link scheme uses the ABR feedback loops of AIM layer between CL user and CL server or between CL servers, and the header translation table carrying out the routing function of frame. And hybrid scheme is the scheme that adds end-to-end loop to link-by-link scheme and then uses RM message using CLNAP-PDU(ConnectionLess Network Access Protocol - Protocol Data Units) of CL layer. These schemes can be implemented easily because of using the ABR loop of ATM layer, end-to-end loop of CL layer, and the routing function of CL server. In this paper the characteristic and effects of two schemes in CL server bas been compared and analyzed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.29-38
• /
• 1998

This ppaer suggests a congestion control scheme for CL(ConnectionLess) overlay network using the feedback loops getween CL werver, between CL servers, and the header translation table of CL server. The CL overlay network for CBDS(Connectionless Broadband Data Service) defined by ITU0T(International Telecommunication Union-Telecommunication) consists of CL servers which route frames and links which connect between CL user and CL server or between CL servers. In this CL overlay network, two kinds of congestions, link congestion and CL server congestion, may occur. We suggest a scheme that can solve the congestion using ABR(Available Bit Rate) feedback control loop, the traffic control mechanism. This scheme is the link-by-link method suing the ABR feedback control loops between CL user and CL server or between CL servers, and the header translation table of CL server. As CL servers are always endpoints of ABR connections, the congestion staturs of the CL server can be informed to the traffic sources using RM(Resource Management) cell of the ABR feedback loops. Also CL server knows the trafffic sources making congestion by inspecting the source address field of CLNAP-PDUs(ConnectionLess Network Access Protocol - Protocol Data Units). Therefore this scheme can be implemeted easily using only both ABR feedback control loop of ATM layer and the congestion state table using the header translation table of CL server because it does not require separate feedback links for congestion control of CL servers.