• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.210-218
• /
• 1998

The ATO(Automatic Train Operation) System is used for train operation instead of drivers. It is interfaced with TCMS(Train Control and Monitoring System) and ATC/TWC system in the train and wayside facilities. In this paper describes configuration of ATO, specification of ATO hardware, construction of ATO software and the algorithm fur automatic train speed regulation in the carborn ATO system. ATO Application Software is consist of ART, SPR, REG, SRV and PSM tasks. ART task is main control part of the ATO that determine ATO control, ATO mode, state transition. SPR determine speed reference according to train motion status, track data, train data and restricted train speed. REG task regulated train speed form the starting of one station to the precision stop at the other station under the result of ART and SPR tasks. In this paper, a algorithm for the train speed regulation while running is described.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1064-1069
• /
• 2014

The railway signalling system plays an essential role in the headway and routing control for a safe and efficient train operation. The reliable and safe operation of the system is very important because the failure of the railway signalling system can lead to the collision, derailment, or unexpected stop of a train. So far, the conventional wayside signal mode (ATS: Automatic Train Stop) has been generally used as the railway signalling system. However, this system is highly linked to a risk of major accidents resulted from human mistakes such as missing a signal or careless control of train speed. Accordingly, the onboard signal mode (ATC: Automatic Train Control) as an alternative of ATS has been recently introduced and applied to transmit effectively the information on speed control of a train by using computers and communication equipment. In the process of replacing the obsolete signal system, it is necessary to switch over the system while providing passengers with normal services. Therefore, the integration of a railway signaling system compatible for both ATS and ATC and its interface is discussed in this study. In particular, the implementation scenario required for operation planning of the integrated system was designed, and the results as well as effects of its applicability test were also presented.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.900-905
• /
• 2006

5678SMRT (Seoul Metropolitan Rapid Transit Co) by a ATC/ATO system the other side which is operated with an automatic movement with a manual operation, the Seoul subway 1.2 lines ATS and 3.4 lines adopt a ATC method and they are operated. But it is improving progressively in SMRT railway ATO method. The ATO the operation method leads exchange of information of wayside and train system for and it is possible, the TWC system configuration is becoming wayside and train system and the radio antenna. It discussed the equipment for a TWC system and a automatic operation from the dissertation which it sees. It investigated a data exchange, a message format and an interface control method and it joined in and a system maintenance conservative method it discussed.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.412-418
• /
• 2010

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC standard62279 which is commonly applied to railway system for Automatic Train Control(ATC) system in accordance with Urban Maglev project. This also shows approach methods and relative activities for project life- cycle to accomplish and ensure the system requirements of ATC system, RAMS and S/W quality activities. Furthermore, the key tasks conducted with ISA are noted in detail. These kind of activities for software quality of ATC system to obtain S afety Certificate could be a CASE model to improve the quality of domestic railway system and products, and also contribute to the growth of railway business and toward the achievement of overseas' railway signaling markets.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.755-764
• /
• 2008

When the high speed train (KTX) departs from station in the high-speed line, sometimes on board signal disappears, which causes a hindrance of the operation punctuality, therefore, we have a research objective to verify the causes of hindrance and to find an improvement plan. In the process of research, when train left, we applied sand on the rail to improve adhesive power, whose sand has an effect on the ATC(Automatic Train Control) signal wave. We detected & analyzed signal waves which came from detecting device by changing operation condition in accordance with sand material

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1029-1030
• /
• 2008

철도에서는 열차가 출발할 때 착력을 향상시키기 위해 레일과 차륜사이에 모래를 살사하게 되는데 이때 ATC(Automatic Train Control : 열차자동제어장치) 신호파형에 영향을 줄 수 있다는 판단에 따라 시험운행하면서 ATC 차상장치인 TVM 430의 CRNB 보드 내에서 살사동작 후 신호파형을 측정하고 분석하였다. 이로 인해 다중화 되어 있는 차상장치 시스템의 동작상태와 살사재료별 ATC 신호파형에 미치는 영향성을 파악할 수 있었으며 향후 살사로 인해 발생되는 문제점 등의 연구에 활용될 수 있을 것으로 판단된다.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.2017-2022
• /
• 2009

Sinbundang Line(SBL) Train moves the transition zone where is located between Jeongja station and Migeum station switched over from Communication Based Train Control (CBTC) system area to Automatic Train Control (ATC) system area and viceversa. The SBL train to move the between SBL and Bundang Line is needed to install the Specific Transmission Module (STM) on SBL Line for interface with Bundang Line; STM receives from speed code from Bundang Line. So we suggested the method to ensure mutual compatibility and reliability for train operation on each other signaling system.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.903-908
• /
• 2005

Existing ATC/ATO/TWC system has a ATC(Automatic Train Control) antenna for receiving the speed code, a ATO(Automatic Train Operation) antenna for obtaining the exact distance to go to platform and TWC(Train and Wayside Communication) antenna for communication between on-board and wayside system. This paper proposes the ATO/TWC antenna with tele-powering module, telegram transmitter/receiver module. This antenna communicates with a passive type tag(wayside Precision Stop Marker) for the information of distance from the stop position and a active type tag for the door command and status in the platform.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.350-357
• /
• 2001

본 논문은 고정폐색구간에서 차량운전 특성과 속도패턴이 다양한 다종의 열차들이 동일선로에서 복합되어 고밀도 운행을 위한 방법으로, 신호현시에 대한 제반정보를 차상으로 전송 받아 기관실 신호표시반에 신호를 현시 하는 차상신호방식(Cab Signalling System)중에서, 선행열차의 위치, 선로조건 등 지상의 상태정보를 후속열차가 수신하여 열차 자신의 제동특성 등 차량정보와 비교 분석하여 제동거리를 계산하는 distance to go 방식으로 열차운전속도를 제어하는 ATP (Automatic Train Protection) 시스템을 제안하였다. 폐색구간별 고정된 신호속도단계가 부여되는 ATC(Automatic Train Control) 시스템에서는 운행패턴이 같은 단일차종의 열차만 운행하는 구간에서는 일정속도에 의한 폐색구간 분할로 구간내 distance to go 신호체계가 이루어지지만, 차종과 속도패턴이 서로 상이한 복합열차들의 운행구간에서는 안전거리 확보를 위하여 저속열차의 제동거리를 기준으로 폐색구간 분할 및 속도결정이 이루어지므로 ATP 방식보다 운행효율이 다소 떨어짐을 알 수 있었다. 이를 차량특성과 속도패턴이 다른 3개의 열차를 모델로 하여 열차별 감속도에 의한 제동특성을 ATC와 ATP 신호제어체계에 접목시켜 시뮬레이션을 하였다.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.57-66
• /
• 2007

1974. 8. 15 SeoulMetro, beginning with the first electric railway established at six cities, so it is managing mass transportation of traffic. Especially, in case of seoul, It is managing that from one to eight lines, 286.9km, 265 stations have installed and now it is carrying about 5.5million of passengers everyday, and 2,000million passengers a year. So accident is increasing from the station every year. For this measure, SeoulMetro prepares safety fence for passengers crash but, as suicides or people who watch the accident took place, for at the bottom of passengers crash protection, PSD installing is needed. Even though, PSD is managing ATO section but, in controlling SeoulMetro, one to four lines sections are (ATS, ATC)section. Between as ATS, ATC section, ATO section, subway gate and PSD must have opened and crossed always at the time. And the interlock control corrosion protection gate, managing skills with installation, method, using in history, apply to 10rail cars one train sets, and maximum applying 2224% sections of passengers congested that consideration is to be needed. So 2004, SeoulMetro improved technology and basie design of PSD at ATS section. Based on this, from 2005.4 to 2006.6, using subway 2lines per 12stations set the model installation(full type 11stations, half type 1station) After installing in case of success, it is going about to suggest that effective analysis and hereafter subject.