• 한국수산과학회지
• /
• 제32권2호
• /
• pp.144-148
• /
• 1999

상업적 규모의 순환여과식 탱크에서 사료 공급 횟수에 따른 산소 소비량의 변화를 조사하였다. 실험에 이용된 사육 장치는 순환여과식 시설내의 원형 콘크리트 탱크 (직경 270cm, 높이 80cm)를 이용하여 평균 체중 400g의 나일틸라피아 (Oreochromis niloticus)를 390kg 방양하여 실험에 이용하였다. 우선 3일간 사육 어류를 절식시킨 후 기초대사율을 측정하였고, 사료 공급 횟수를 1회, 2회, 5회 그리고 9회로 나누어 공급한 후 산소 소비량의 일간 변화를 측정하였다. 절식 상태에서 산소 소비량 (기초대사율)은 평균 $39.31{\pm}4.4mg\;O_2/kg$ fish/hr이였고 사료 공급횟수에 따른 1일 평균 산소 소비량은 1회, 2회, 5회 및 9회 공급시 각각 $79.9{\pm}21.5,\;81.3{\pm}14.8,\;84.2{\pm}9.9$ 및 $98.9{\pm}11.0mg\;O_2/kg$ fish/hr을 소비하는 것으로 나타나 사료 공급 횟수가 증가함에 따라 평균 산소 소비량은 증가하였으나, 유의적인 차이는 나타나지 않았다. 사료 공급후 최대 산소 소비량에 도달하는 시간은 사료 공급후 30$\~$50분으로 나타나 사료공급 횟수와는 유의적인 상관 관계가 없는 것으로 나타났다. 사료공급 횟수에 따른 산소 소비량의 최대치는 1회, 2회, 5회 및 9회 공급시에 각각 161.2, 123.4, 111.1 및 111.1 mg $O_2/kg$ fish/hr을 소비하는 것으로 나타나 하루에 1회 공급하였을 때 최대 산소 소비량이 가장 높은 것으로 나타났다.

• Journal of Animal Science and Technology
• /
• 제62권3호
• /
• pp.356-364
• /
• 2020

The reproductive performance of lactating sows was investigated by using different feeding methods including conventional feeding (CF, 3 times/d) or free feeding (FF), and different dietary energy level including low energy (LE: 3,300) or high energy (HE: 3,400 kcal/kg) during the hot season. A total of twenty-eight crossbred (Yorkshire × Landrace) sows were distributed into four treatments as a 2 × 2 factorial arrangement. Sows in the FF group showed lower body weight and backfat loss (p < 0.05) compared with the CF group. Backfat loss during lactation was lower (p < 0.05) in sows fed HE diet than in that fed LE diet. There were no significant differences in litter survival rate and weaning to estrus interval, but the litter weight at weaning was improved (p < 0.05) in FF and HE sows. Hence, it is concluded that using the free-feeding system or increased dietary energy density leads to improved sow performance during hot ambient temperature.

• Journal of Biosystems Engineering
• /
• 제43권2호
• /
• pp.119-127
• /
• 2018

Purpose: Fermented feedstuffs have been found to improve productivity, reduce manure odor, and increase immunity. However, because there is not a commercialized pelletizing system for fermented total mixed ration (TMR) for pig feeding in Korea, a pelletizing system using TMR fermented feed was developed. Methods: The particle size, density, and volumetric density of the TMR feeds used in the test were measured. The pellet durability index (PDI, %) value of the pelletized TMR feed based on its moisture content, and the amount of pellet production based on the rotation speed of the compression roller were measured. Results: The test materials, TMR1 and TMR2, were approximately compressed to 387 kg/m3 with 18.2% (w.b.) and 544 kg/m3 with 22.2% (w.b.), respectively. Throughout this pellet molding test, the moisture content from 15 to 20% (w.b.) of mixture feedstuffs, including fermented forage, could be used for pellet molding. Based on the results, a small-scale pellet molding system of fermented TMR was designed and manufactured for pig farms. As rotation speed increased, the throughput increased, whereas the moisture content decreased by approximately 2% (w.b.) because of pellet molding. The best yield of pellets with 94.2% PDI was of 536 kg/h at 135 rpm rotation speed. Conclusions: Although the throughput of the prototype increased as the rotation speed increased, it was difficult to operate because of the greater noise and the lower PDI (%) at the higher rotation speed of the pellet molding rotor. It was found that the best production of pellets using the prototype was 536 kg/h having a PDI of 94.2% or more at a rotation speed of 135 rpm.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.258-259
• /
• 2012

This paper proposes a new control strategy to eliminate the harmonic components of stator current for stand-alone DFIG system feeding non-linear loads. In this method, the LSC operates as an active filter which is controlled by employing a proportional-integral and a resonant controller. And also, the stator current is used as the feedback signal for the compensator instead of the load current, so that the additional current sensor at the load side can be removed. The experiment is verified to validate the effectiveness of the proposed compensating method.

• 한국항공운항학회지
• /
• 제22권4호
• /
• pp.93-98
• /
• 2014

In this study, control of oxidizer mass flow rate and verification of control system were performed for hybrid rocket thrust control application. Oxidizer flow control system consists of ball valve and stepping motor where gaseous oxygen was used for oxidizer at feeding pressure of 10, 20 and 30 bar. According to experimental results, the oxidizer mass flow rate showed a relatively linear increment as ball valve open angle increases regardless of feeding pressure. In addition, the level of the oxidizer flow rate was kept almost constant at each sequence of flow control with ball valve during the 20 seconds of operation.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.502-508
• /
• 2011

In this paper, we proposed vertical feeding mechanism for a slide parts feeder using the slide type method. This parts feeder of the slide type method have been proposed to suppress the dust generation from the feeding objects. The proposed parts feeder mechanism is composed with the casing hopper, the vertical feeding unit, the in-line feeder and linear shooter unit. And, these mechanisms did modularity through optimum design by means of mechanical and dynamical analysis using the RecurDyn(multi-body dynamics) analysis module. Also were carried out the virtual prototype using the 3-D CAD program. And it had been manufactured as the prototype of the slide parts feeder. The field test for validation of performance was performed directly at the inspection line of bolt and screw. In the field test, this slide parts feeder showed an efficiency of about 1.2 times the bowl feeder. It also showed an epoch reduction in the dust generation compared to the vibration bowl feeder. So this slide parts feeder will be applied useful in the vision inspection system for a screw and bolt.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.324-331
• /
• 2007

The purpose of this study is to analysis effects of defect factors of combine header for cutting speed of combine header, feeding depth of straw, and cylinder speed of thresher. Measurement system for defect factors was consists of sensors to monitor the combine operation and I/O interface to convert the signals. Cutting speed of combine header, feeding depth of straw, cylinder speed of thresher were measured and analyzed. The data were collected from three paddy field during rice harvesting. The tests were conducted at different grounding speeds, lug troubles, and cutter condition. The one way ANOVA and the multiple comparison tests were performed. The results showed that the measured data were useful to monitor the defect factors of combine during harvesting. The faults conditions of grounding speeds, lug troubles, and cutter conditions affected cutting speeds, feeding depths and cylinder speeds of the combine. The data seem to be useful to analysis the faults conditions of combine header.

• 한국미생물·생명공학회지
• /
• 제27권4호
• /
• pp.327-332
• /
• 1999

A highly productive fed-batch fermentation process was developed for the production of L-ornithine by using a new stabilized strain, Breviabcterium ketoglutamicum BK52. Fed-batch cultures with a continuous feeding of the complex medium were conducted on various operating conditions. The optimal concentration of phosphate in the complex medium was 2.1g/L. The optimal feeding rate of L-arginine was 0.028g/L/hr. The optimal feeding point of the complex medium was determined to be at 40 OD of the cell mass. The final L-ornithine concentrations within 64hrs of cultivation in 5 and 50 liter fermenters were 73g/L and 71g/L, respectively. The maximum overall L-ornithine productivity was 1.14g/L/hr which was about 2 times higher than that of the conventional fed-batch culture with intermittent feeding. The overall productivity of the fermentation system is remarkably improved by employing the optimized conditions, and it offers a significant potential for industrial application.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권1호
• /
• pp.34-39
• /
• 2005

Trichloroethylene (TCE) is an environmental contaminant provoking genetic mutation and damages to liver and central nerve system even at low concentrations. A practical scheme is reported using toluene as a primary substrate to revitalize the biofilter column for an extended period of TCE degradation. The rate of trichloroethylene (TCE) degradation by Pseudomonas putida F1 at $25^{\circ}C$ decreased exponentially with time, without toluene feeding to a biofilter column ($11\;cm\;I.D.{\times}95\;cm$ height). The rate of decrease was 2.5 times faster at a TCE concentration of $970\;{\mu}g/L$ compared to a TCE concentration of $110\;{\mu}g/L$. The TCE itself was not toxic to the cells, but the metabolic intermediates of the TCE degradation were apparently responsible for the decrease in the TCE degradation rate. A short-term (2 h) supply of toluene ($2,200\;{\mu}g/L$) at an empty bed residence time (EBRT) of 6.4 min recovered the relative column activity by $43\%$ when the TCE removal efficiency at the time of toluene feeding was $58\%$. The recovery of the TCE removal efficiency increased at higher incoming toluene concentrations and longer toluene supply durations according to the Monod type of kinetic expressions. A longer duration ($1.4{\sim}2.4$ times) of toluene supply increased the recovery of the TCE removal efficiency by $20\%$ for the same toluene load.

• Journal of Biosystems Engineering
• /
• 제14권2호
• /
• pp.94-103
• /
• 1989

This study was intended to develop the automatic feeding depth control system of the head-feed combine which could feed the rice head into threshing unit at the optimal depth regardless of plant height and uneven ground surface. In the control system, one-board microcomputer was used for the controller instead of conventional electric circuits. Field test of the combine equipped with the control system was conducted to evaluate its overall performance. It was also investigated how the location and time delay of rice head sensor affect the system performance.