• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2009

This paper presents a single supply PLC SoC ASIC with a built-in analog Front-end circuit. To achieve the low power consumption along with low cost, this PLC SoC employs fully CMOS Analog Front End (AFE) and several LDO regulators (LDOs) to provide the internal power for Logic Core, DAC and Input/output Pad driver. The receiver part of the AFE consists of Pre-amplifier, Gain Amplifier and 1 bit Comparator. The transmitter part of the AFE consists of 10 bit Digital Analog Converter and Line Driver. This SoC is implemented with 0.18 ${\mu}m$ 1 Poly 5 Metal CMOS Process. The single supply voltage is 3.3 V and the internal powers are provided using LDOs. The total power consumption is below 30 mA at stand-by mode to meet the Eco-Design requirement. The die size is 3.2 $\times$ 2.8 $mm^{2}$.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.729-732
• /
• 2001

Digital signal processors(DSP) are widely used in modern power conversion devices, ac motor drives. However, generating pulse-width modulation(PWM) gating signals requires so high sampling rates that most computation resources of the DSP must be devoted to generating them. This paper presents an ASIC realization of 2 channel space-vector PWM(SVPWM). The developed DSP(ECLDSP) board can transmit gating signals to 2 converter/inverter and control them. ECLDSP board is used for control the various kinds of power-quality improvement systems.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.197-199
• /
• 2002

The invention of VHDL(Very High Speed Integrated Circuit Hardware Description Language), Technical language of Hardware, is a kind of turning point in digital circuit designing, which is being more and more complicated and integrated. Because of its excellency in expression ability of hardware, VHDL is not only used in designing Hardware but also in simulation for verification, and in exchange and conservation, composition of the data of designs, and in many other ways. Especially, It is very important that VHDL is a Technical language of Hardware standardized by IEEE, intenational body with an authority. The biggest problem in modern circuit designing can be pointed out in two way. One is a problem how to process the rapidly being complicated circuit complexity. The other is minimizing the period of designing and manufacturing to survive in a cutthroat competition. To promote the use of VHDL, more than a simple use of simulation by VHDL, it is requested to use VHDL in composing logical circuit with chip manufacturing. And, by developing the quality of designing technique, it can contribute for development in domestic industry related to ASIC designing. In this paper in designing SMPS(Switching mode power supply), programming PWM by VHDL, it can print static voltage by the variable load, connect computer to chip with byteblaster, and download in Max(EPM7064SLCS4 - 5)chip of ALTER. To achieve this, it is supposed to use VHDL in modeling, simulating, compositing logic and product of the FPGA chip. Despite its limit in size and operating speed caused by the specific property of FPGA chip, it can be said that this method should be introduced more aggressively because of its prompt realization after designing.