• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.339-357
• /
• 2009

Probability based design(PBD) method is independent of construction materials and uses real material properties unlike allowable stress design(ASD) that depends on small clear specimen property, also give quantitative safety and endurance lifetime of a certain material. Moreover, almost advanced country accepted PBD method instead of ASD method. So it is urgent to convert the current ASD method into the PBD method. However, there are wholly lacking of domestic researches related to current issue, and to solve several points in ASD method and to take advantage of PBD method, the conversion from the ASD method into the PBD method is a worldwide trend. Other domestic construction codes, such as steel or concrete constructions, accept the PBD method as well. Accordingly, to introduce PBD method into wood structural design, general theory, and preliminary data and methods were reviewed. With keeping this in mind, some important contents were reviewed, sorted some points for wood structural design that have distinctions against the other construction materials. Furthermore, the history of PBD method, and statistical data and theories for the PBD method, and preliminary data of resistance and load that are two random variables for the PBD method, and finally the difference between limit state design(LSD) and load and resistance factor design(LRFD) that were two superpowers in the PBD method.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.45-50
• /
• 2004

Currently, structural design of wood structure has been based on ASD (Allowable Structural Design) in Korea. However, the results from this method was known as greater than real value because variations of materials and various conditions were not considered sufficiently. So the study about the design method with probabilistic approach is being performed to overcome this problem. And the standard design method of RBD (Reliability Based Design) has been established and applied. In this study, to apply this method on the domestic wood, the distribution property of the lumber and Glulam was analyzed from the previous report and the basis of the standardized design method was established as soft conversion method from allowable stress used in ASD into reference resistance used in RBD. And through the additional study about the sample size as a important factor to effect on soft conversion, condition to be required in more accurate conversion was evaluated.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.32 no.3
• /
• pp.112-117
• /
• 2021

Objectives: This study identified changes in social communication and interaction among children with autism spectrum disorder (ASD) through Theraplay. Methods: This study included 20 children who were diagnosed with ASD by a child and adolescent psychiatrist and were recommended to undergo Theraplay in 2012-2017. The Marschak interaction method was used to identify and analyze the interactions between parents and their children. The Korean version of the Social Communication Questionnaire (K-SCQ) was used to evaluate symptoms of ASD. The Wilcoxon signed-rank test was used to compare the differences before and after Theraplay. Results: Upon comparing the differences in total K-SCQ scores, there were statistically significant changes (z=-3.269, p=0.001) in children with ASD. Changes were also confirmed in each category, namely social interaction, communication, and limited and repetitive behavior patterns (p=0.011, p=0.025, p=0.039, respectively). Conclusion: This study found that Theraplay may cause significant changes in social communication in children with ASD. Further studies are needed to establish the effectiveness of Theraplay in children with ASD.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.591-604
• /
• 2008

In this study, two design examples of drilled shafts on soft ground in Ho-Chi-Minh City, Vietnam are introduced. One is for a 27-story apartment and the other is for a Arch bridge over Saigon river. Unlikely the normal cases in Korea, all of the bored pile foundations are supposed to be placed on soil layers. Therefore, skin friction between pile and ground is the most crucial design parameter. Three methods using SPT N value of sandy soil -Korean Road Bridge Code(1996), Reese and Wright (1977), and O'Neill and Reese (1988)- were adopted to obtain an ultimate axial bearing capacity. In order to verify the calculated bearing capacity, 3 sets of static load test and a Osterberg Cell test were performed at an apartment site and a bridge site respectively. LRFD (Load Resistance Factored Design) method was compared with ASD (Allowable Stress Design) method. On application of ASD method, safety factor for skin friction was adopted as 2 or 3 while safety factor for end bearing was 3. The design bearing capacities from ASD method matched well with those from LRFD method when safety factor for skin friction was adopted as 2.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.30 no.4
• /
• pp.145-152
• /
• 2019

Objectives: The detection of autism spectrum disorder (ASD) is based on behavioral observations. To build a more objective datadriven method for screening and diagnosing ASD, many studies have attempted to incorporate artificial intelligence (AI) technologies. Therefore, the purpose of this literature review is to summarize the studies that used AI in the assessment process and examine whether other behavioral data could potentially be used to distinguish ASD characteristics. Methods: Based on our search and exclusion criteria, we reviewed 13 studies. Results: To improve the accuracy of outcomes, AI algorithms have been used to identify items in assessment instruments that are most predictive of ASD. Creating a smaller subset and therefore reducing the lengthy evaluation process, studies have tested the efficiency of identifying individuals with ASD from those without. Other studies have examined the feasibility of using other behavioral observational features as potential supportive data. Conclusion: While previous studies have shown high accuracy, sensitivity, and specificity in classifying ASD and non-ASD individuals, there remain many challenges regarding feasibility in the real-world that need to be resolved before AI methods can be fully integrated into the healthcare system as clinical decision support systems.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.357-362
• /
• 2000

Allowable stress design(ASD) method has been widely used to design steel structures such as boiler and heat recovery steam generator(HRSG) of power plant. However, many researchers are recently intrested in road and resistance factor design(LRFD) method which may take the place of ASD. In this work, the weight calculation of steel structure was compared when ASD and LRFD were applied respectively. For the calculation of weight of steel structure, computer program was developed and applied to obtain beam weight. Using this program and GTSTRUDL, structural design program, weight of steel structure is calculated. As a result of weight calculation, maximum 5.4% of weight reduction is achieved among examples of this study by applying LRFD comparing with the result of ASD, and those results quite dependent on the applied load and member classification.

• Korean Journal of Biological Psychiatry
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2009

Objectives : The serotonin transporter gene(SLC6A4) is one of the most widely studied candidate genes in autism spectrum disorder(ASD), but there have been conflicting results from studies into the association between SLC6A4 and ASD. The aim of this study was to evaluate the association between single nucleotide polymorphisms(SNPs) in the SLC6A4 gene and ASD in the Korean population. Methods : We selected 12 SNPs in SLC6A4 and observed the genotype of 151 Korean ASD trios. We tested the family-based association for each individual polymorphism and haplotype by using the standard TDT method in Haploview(http://www.broad.mit.edu/mpg/haploview/). Results : Through transmission-disequilibrium testing and haplotype analysis, we could not find any statistically significant transmitted allele or haplotype. In addition, a case-control association test with Korean HapMap data did not reveal any statistical significance. Conclusion : Although serotonin-related genes must be considered candidate genes for ASD, we suggest that common SNPs of SLC6A4 are not important markers for associations with Korean ASD.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.358-373
• /
• 2009

Probability based design(PBD)method has some advantages against current design methods. First, it can provide the quantitative values for the structural safety or capacity through the reliability index, $^{\beta}$. That presented the certainty on the corresponding structure for the designer or user, also that permitted the broad consideration in the safety of structures. In addition, it can give the quantitative lifetime of the related structure in the calculation process of target reliability index. Also, incidental economical efficiency can be expected because decrease of required structural material can be obtained by using the practical material data. Unlikely current deterministic structural design methods, main advantage is the reflection of real condition in the structural design process by application of the data with not small clear specimen but structural size material. Advanced countries, namely America, Canada, Europe, Australia and New Zealand already converted from allowable stress design(ASD) method to PBD method and used as a standard wooden structures code in the late 1980s and 1990s. Other domestic constructions standards such as the steel or concrete constructions accepted and used the PBD methods already. Accordingly, wooden structural design method also should be converted from deterministic ASD to probabilistic LRFD(Load and resistance factor design) in order to keep pace with worldwide demands for PBD. Hence, to suggest the reason of introduction the PBD in domestic wooden structural design and analysis, a brief example was used to show the different reliability index by using the different design methods. Definition, merits and demerits of deterministic ASD and probabilistic LRFD were followed. Also the three examples were presented to show the similarity and differences between ASD and LRFD. Finally, connection problems that might cause a disputation in wooden structural design and analysis were broadly examined.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.5
• /
• pp.547-559
• /
• 2012

The concrete structural design in domestic has based on the allowable stress design (ASD) method and ultimate strength design (USD) method. Recently limit state design (LSD) method has issued and attempted to adopt in geotechnical design. Because ASD method and USD method have restriction in economic design. In this study, the generated member forces were calculated about high strength concrete segment lining based on japanese LSD code. And it compared with domestic USD code for identifying the economic design possibility of LSD and domestic applicability. In analysis results, the aspect of moment had generated similarly each other but the member forces of japanese LSD code were decreased (26.0% of moment and 26.7% of shear force) comparing with USD method. For that reason, possibility of economic segment design with stable condition were identified.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.374-384
• /
• 2018

This study examined the effects of clarification training on conversational breakdowns and repair strategies of 3 school aged children with ASD. Clarification training provided to the participants during playing the barrier games. The results found that the occurrence of conversational breakdown was decreased in terms of overall and types. The occurrence and appropriateness rates of repair strategies were increased among all participants. Based on the results, 'clarification training' used in this study can be an effective method to train children with ASD for appropriate repair strategies in conversation.