• 제목/요약/키워드: AS-level topology

검색결과 184건 처리시간 0.026초

각주형 부품상의 가공 특징형상 인식 (Recognition of Machining Features on Prismatic Components)

  • 손영태;박면웅
    • 대한기계학회논문집
    • /
    • 제17권6호
    • /
    • pp.1412-1422
    • /
    • 1993
  • 본 연구는 각주형 금형부품을 절삭가공할때 부품의 설계데이터로부터 부품의 형상적인 특징을 추출하여 공정설계시스템인 MOLDCAPP과 작업설계시스템인 COPS에서 사용할 수 있는 정보를 생성함으로써 CAD/CAM의 연결을 자동화할 수 있는 특징형상 인식 시스템을 개발하는 연구로, 특징형상 인식기법의 창안보다는, 가용한 기술의 장 점을 사용하여 각주형 공작물의 기계 절삭가공으로 생성될 수 있는 형상을 특징형상으 로 정의하고 ACIS로 설계된 CAD데이터로부터 정의된 특징형상을 추출하여 각 특징형상 들의 형상 데이터를 결정함으로써 MOLDCAPP, COPS 등의 공절설계시스템의 입력데이터 를 생성할 수 있도록 Fig.1과 같이 설계하였다. 특히 PART시스템과 같이 인식대상이 포괄적이지 않으나, 금형부품상의 특징형상으로 범위를 축소하고 금형부품의 가공특징 을 고려하여 인식규칙을 단순화함으로써 금형가공공정의 CAD/CAM연결에 이용될 수 있도록 하였다.

A Possible Path per Link CBR Algorithm for Interference Avoidance in MPLS Networks

  • Sa-Ngiamsak, Wisitsak;Varakulsiripunth, Ruttikorn
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.772-776
    • /
    • 2004
  • This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

  • PDF

연속 이중 폐쇄 루프 완전 제어 전략 기반 직접 구동 풍력 전력망 연결 시스템 연구 (Research on the Direct-drive Wind Power Grid-connected System Based on the Back-to-back Double Closed-loop Full Control Strategy)

  • 소헌용;김한길;한개;정회경
    • 한국전자통신학회논문지
    • /
    • 제19권4호
    • /
    • pp.661-668
    • /
    • 2024
  • 전력전자 풀파워 컨버터 기반의 직접 구동 영구자석 동기 풍력발전 그리드 연계 시스템의 토폴로지를 기반으로 풍력터빈 모델과 그리드 측 인버터 모델을 연구하고, 기계측 정류기 제어 기반의 전류 및 속도 이중 폐쇄 루프 전략과 전류 및 전압 이중 폐쇄 루프를 기반으로 한 그리드 측 인버터 제어 전략을 설계하여 2레벨 연속 이중 폐쇄 루프 완전 제어 전략을 구현했다. MATLAB/Simulink를 이용하여 시스템 시뮬레이션 모델을 구축하였고, 풍속이 단계별로 변할 때의 장치의 동작을 시뮬레이션하였으며, 그리드 전압의 동일한 위상과 양호한 정현파 특성을 갖는 그리드 연결 전류를 출력하였다. 연결된 시스템이 안정적이고 효율적으로 실행되었다. 시뮬레이션 결과 모델의 타당성과 합리성, 제어 전략의 정확성과 타당성을 검증하였다.

Gene Co-expression Analysis to Characterize Genes Related to Marbling Trait in Hanwoo (Korean) Cattle

  • Lim, Dajeong;Lee, Seung-Hwan;Kim, Nam-Kuk;Cho, Yong-Min;Chai, Han-Ha;Seong, Hwan-Hoo;Kim, Heebal
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권1호
    • /
    • pp.19-29
    • /
    • 2013
  • Marbling (intramuscular fat) is an important trait that affects meat quality and is a casual factor determining the price of beef in the Korean beef market. It is a complex trait and has many biological pathways related to muscle and fat. There is a need to identify functional modules or genes related to marbling traits and investigate their relationships through a weighted gene co-expression network analysis based on the system level. Therefore, we investigated the co-expression relationships of genes related to the 'marbling score' trait and systemically analyzed the network topology in Hanwoo (Korean cattle). As a result, we determined 3 modules (gene groups) that showed statistically significant results for marbling score. In particular, one module (denoted as red) has a statistically significant result for marbling score (p = 0.008) and intramuscular fat (p = 0.02) and water capacity (p = 0.006). From functional enrichment and relationship analysis of the red module, the pathway hub genes (IL6, CHRNE, RB1, INHBA and NPPA) have a direct interaction relationship and share the biological functions related to fat or muscle, such as adipogenesis or muscle growth. This is the first gene network study with m.logissimus in Hanwoo to observe co-expression patterns in divergent marbling phenotypes. It may provide insights into the functional mechanisms of the marbling trait.

취약지역 마을의 건축경관이미지형성에 관한 연구 - 새뜰마을사업 대상마을을 중심으로 - (A Study on the Building of Architectural Landscape Image in the Vulnerable Community - Focused on the villages of SaethulMaul Project -)

  • 정건채
    • 한국농촌건축학회논문집
    • /
    • 제18권3호
    • /
    • pp.17-24
    • /
    • 2016
  • The aim of this study is to build an architectural landscaping design ways of vulnerable community in rural area. I surveyed scenery structures, public buildings and single home forms, and fence types of house in twelve villages which have undertaken improving environment of rural community in four provinces. They all have an inferior surroundings to live in rural village, because they were isolated from the city, located on the mountain or island, and made a living under the slate materials of roof. The central government has been driving to reform the conditions with local office, so that they may increase their living qualities and village environment to get to the general level of rural area. There are three results of this study as follows: First, the scenery of the village surveyed has a remarkable views of locality and hierarchy of layers between field and mountain, which is very identified as a typical image of Korean rural topology. Second, the public buildings and single homes and outside wall of houses were personally designed or reformed as a various types like a flat slab style and different architectural structure, because they followed only to keep the architectural code rather than to make a harmony with other traditional style buildings. When they have to remodel it again through SaethulMaul project, they are needed to consider of both architectural code and design guideline for the local landscape design image. Third, to make a different landscape view of each village and improve housing conditions, it should be taken a people participation design way.

Fabrication of Flexible Surface-enhanced Raman-Active Nanostructured Substrates Using Soft-Lithography

  • 박지윤;장석진;여종석
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.411-411
    • /
    • 2012
  • Over the recent years, surface enhanced Raman spectroscopy (SERS) has dramatically grown as a label-free detecting technique with the high level of selectivity and sensitivity. Conventional SERS-active nanostructured layers have been deposited or patterned on rigid substrates such as silicon wafers and glass slides. Such devices fabricated on a flexible platform may offer additional functionalities and potential applications. For example, flexible SERS-active substrates can be integrated into microfluidic diagnostic devices with round-shaped micro-channel, which has large surface area compared to the area of flat SERS-active substrates so that we may anticipate high sensitivity in a conformable device form. We demonstrate fabrication of flexible SERS-active nanostructured substrates based on soft-lithography for simple, low-cost processing. The SERS-active nanostructured substrates are fabricated using conventional Si fabrication process and inkjet printing methods. A Si mold is patterned by photolithography with an average height of 700 nm and an average pitch of 200 nm. Polydimethylsiloxane (PDMS), a mixture of Sylgard 184 elastomer and curing agnet (wt/wt = 10:1), is poured onto the mold that is coated with trichlorosilane for separating the PDMS easily from the mold. Then, the nano-pattern is transferred to the thin PDMS substrates. The soft lithographic methods enable the SERS-active nanostructured substrates to be repeatedly replicated. Silver layer is physically deposited on the PDMS. Then, gold nanoparticle (AuNP) inks are applied on the nanostructured PDMS using inkjet printer (Dimatix DMP 2831) to deposit AuNPs on the substrates. The characteristics of SERS-active substrates are measured; topology is provided by atomic force microscope (AFM, Park Systems XE-100) and Raman spectra are collected by Raman spectroscopy (Horiba LabRAM ARAMIS Spectrometer). We anticipate that the results may open up various possibilities of applying flexible platform to highly sensitive Raman detection.

  • PDF

비 자율적 노드 위치 결정을 통한 DHT 네트워크 ID 매핑 공격 방지 (Preventing ID Mapping Attacks on DHT Networks through Non-Voluntary Node Locating)

  • 이철호;최경희;정기현;김종명;윤영태
    • 정보보호학회논문지
    • /
    • 제23권4호
    • /
    • pp.695-707
    • /
    • 2013
  • Kademlia와 같은 DHT(Distributed Hash Table) 네트워크는 참여노드들이 네트워크 토폴로지 상에서 자신의 위치를 자율적으로 결정하는 구조를 가지고 있으며 이를 악용한 ID 매핑 공격에 매우 취약하다. 그 결과 DHT 네트워크에서는 eclipse, DRDoS, 봇넷 은닉통신 등의 보안 문제가 지속적으로 발생되고 있다. 본 논문에서는 ID 매핑 공격을 방지하기 위한 비 자율적 노드 위치 결정 방법을 제안하고 NAT 호환성, 공격 저항성, 네트워크 다양성의 세 가지 측면의 분석을 통해 타 방어기법들과 비교를 수행하였다. 분석결과, 제안된 방법은 타 방어기법과 동등한 수준의 공격 저항성을 나타냄과 동시에 타 방어기법이 갖는 단점인 NAT 호환성과 네트워크 다양성 문제를 극복할 수 있음을 확인하였다.

Analysis of a Harmonics Neutralized 48-Pulse STATCOM with GTO Based Voltage Source Converters

  • Singh, Bhim;Saha, Radheshyam
    • Journal of Electrical Engineering and Technology
    • /
    • 제3권3호
    • /
    • pp.391-400
    • /
    • 2008
  • Multi-pulse topology of converters using elementary six-pulse GTO - VSC (gate turn off based voltage source converter) operated under fundamental frequency switching (FFS) control is widely adopted in high power rating static synchronous compensators (STATCOM). Practically, a 48-pulse ($6{\times}8$ pulse) configuration is used with the phase angle control algorithm employing proportional and integral (PI) control methodology. These kinds of controllers, for example the ${\pm}80MVAR$ compensator at Inuyama switching station, KEPCO, Japan, employs two stages of magnetics viz. intermediate transformers (as many as VSCs) and a main coupling transformer to minimize harmonics distortion in the line and to achieve a desired operational efficiency. The magnetic circuit needs altogether nine transformers of which eight are phase shifting transformers (PST) used in the intermediate stage, each rating equal to or more than one eighth of the compensator rating, and the other one is the main coupling transformer having a power rating equal to that of the compensator. In this paper, a two-level 48-pulse ${\pm}100MVAR$ STATCOM is proposed where eight, six-pulse GTO-VSC are employed and magnetics is simplified to single-stage using four transformers of which three are PSTs and the other is a normal transformer. Thus, it reduces the magnetics to half of the value needed in the commercially available compensator. By adopting the simple PI-controllers, the model is simulated in a MATLAB environment by SimPowerSystems toolbox for voltage regulation in the transmission system. The simulation results show that the THD levels in line voltage and current are well below the limiting values specified in the IEEE Std 519-1992 for harmonic control in electrical power systems. The controller performance is observed reasonably well during capacitive and inductive modes of operation.

곡선 그리드상에 정의된 벡터 필드를 위한 다해상도 모형 (Multiresolution Model for Vector Fields Defined over Curvilinear Grids)

  • 정일홍;장우현;조세홍;이봉환
    • 한국멀티미디어학회논문지
    • /
    • 제3권5호
    • /
    • pp.542-549
    • /
    • 2000
  • 본 논문에서는 곡선 그리드상의 2차원 플로우를 분석하고 시각화하기 위한 다해상도 모형을 제안한다. 다해상도 분석은 여러 상세 단계에서 윤곽을 나타내고 분석하는 매우 유용한 도구이다. 일반적으로 벡터 필드의 데이터는 매우 크고 복잡하기 때문에 벡터 필드 시각화에 다해상도 분석을 적용하는 것은 매우 유용하다. 낮은 해상도에서의 근사 값을 사용하면 벡터필드 위상의 전체적인 개요를 짧은 시간 안에 파악할 수 있다. 부분 합성은 사용자가 관심 있는 부분만 합성함으로써 효과적으로 화대 또는 축소할 수 있게 해준다. 이 새로운 모형은 네스트된 곡선 그리드 영역 상에 구분 적으로 정의된 함수의 네스트된 공간에 기초를 두고 있다. 네스트된 영역은 안쪽 경계선의 원래 기하학적 형상을 유지하기 위해 사용된다. 본 논문에서는 이러한 영역 위에서 Haar 웨이브릿에 대한 정제 방정식과 합성 방정식을 제안하고 예제들을 보여준다.

  • PDF

DiffServ 기반 네트워크에서의 실시간 트래픽 서비스 (Real-time traffic service in network with DiffServ)

  • 정진우
    • 한국통신학회논문지
    • /
    • 제32권1B호
    • /
    • pp.53-60
    • /
    • 2007
  • 본 연구에서는 Diffserv 기반의 네트워크, 특히 그 중에서도 트리구조를 가지는 네트워크에서의 지연시간에 대해서 연구하였다. 이러한 네트워크에서의 지연시간 최대치를 구하는 수식을 구하였고, 특히 기존에 알려진 바와는 달리 트리구조의 네트워크에서는 네트워크 utilization과는 상관없이 최대치가 항상 존재함을 보였다. 지연시간 최대치의 특성은 다음과 같이 표현된다. 네트워크 utilization이 큰 경우 네트워크내의 최대 hop count의 제곱에 비례하며, 네트워크 utilization이 작은 경우는 최대 hop count에 비례한다. 이러한 결과를 바탕으로 실제 Metro Ethernet Network과 같은 대규모 네트워크의 경우에서 DiffServ를 이용하여 실시간 트래픽 전송이 가능하다는 것을 보였다.