• 산업경영시스템학회지
• /
• 제24권69호
• /
• pp.107-119
• /
• 2001

In this paper, we propose a model of improvement of quality system level using system FMEA. The system FMEA is developed to a system analysis technique using the concepts of conventional FMEA. This is know what is important factor to manage the ISO 9000 Quality System. Therefore, it is used the system FMEA as the main method of the proposed model. The important factors of this model are internal quality audits, corrective and preventive action, customer claim review management review. This model is considered to be guideline for improvement of quality system level. We show the efficiency of the proposed model by means of a case study.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1191-1200
• /
• 2008

Recently classroom monitoring is becoming important since the lecture is being held in the classroom and academic institutions are interested in the quality assurance. Some institutions have adopted ISO 9000 systems and constructed monitoring system through measurement, analysis and improvement. In this study quality assurance problems in academic institutions and the requirements of ISO 9001:2000 will be briefly discussed. Next we will investigate how to monitor the lecture in the classroom(in-class) using statistical process control techniques such as control charts. Then case study will be given to illustrate the technique to use appropriate statistics. Finally how to monitor the learning process during in-class and after-class will be proposed.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.55-61
• /
• 1994

Mn-Zn ferrite powder was obtained by wet method that was to be coprecipitated the metal ions of Fe2+, Mn2+ and Zn2+ with alkali solution. The target composition of the ferrite powder was 52 mol% Fe2O3, 24 mol% MnO, and 24 mol% ZnO, that was based on the region of high permeability. And the other ferrite powder was prepared by the dry method that was to be mixed the metal oxides as the above chemical composition. The wet method was compared with dry method for the powder properties and the electromagnetic characteristics of sintered cores. The synthesized powder by wet method was smaller particle size, narrower particle distribution, and higher purity than that of dry method. The initial permeability of sintered sample prepared by the wet method was 14000~28000, on the other side, 9000~15500 in case of the dry method.

• 대한산업공학회지
• /
• 제43권2호
• /
• pp.83-89
• /
• 2017

This study aims to investigate the compatibility between 'quality' and 'R&D' and to ascertain what methodology can be applied. To consider the compatibility, this study discussed whether quality management can expand into R&D area in future and whether the quality management principles in ISO9000 can work well in R&D environment. Our conclusion is that the application of the quality management in R&D is valid and can serve as a new paradigm for improving R&D performance. In addition, this study divided the quality concept in R&D into several types from the viewpoints of quality definition and suggested quality methodologies for each type.

• 미생물학회지
• /
• 제10권1호
• /
• pp.1-8
• /
• 1972

This experiment was carried out to investigate the physiological characteristics of isolated bacteria, Ferrobacillus ferooxidans from copper mine water in Korea. The results obtained were as follows ; 1. The optimum pH range for the growth of these bacteria was 2.0-3.0 and optimum temperature was $20^{\circ}C$-$30^{\circ}C$. 2. The oxidation curves of ferrous iron to the ferric iron ran parallel with the growth curves. 3. The optimum nitrogen concentration was 400-800 ppm and the minimal flow rate of air for the maximal growth of the bactria was 70 ml air/min./200ml medium. 4. The growth of these bacteria was inhibited by the absence of ferrous iron and by the addition of sulfur. 5. Ferrous iron at a concentration of 9000 ppm, appeared to be optimum for the most rapid growth of Ferrobacillus ferrooxidans.

• 품질경영학회지
• /
• 제39권4호
• /
• pp.516-526
• /
• 2011

The AS9100 standard builds upon the ISO 9001:2000 quality management system requirements(in their entirety) and defines additional quality management system requirements for the aerospace industry. The 9100 standard on quality management system requirements is intended to be used at all levels of the supplier chain. The International Aerospace Quality Group has released a revision to 9100 for the aviation, space and defense industries. This change aims at improvement on quality, schedule and cost performance by adopting new requirements based on stakeholders' needs. This paper is to review how the AS9100 QMS Requirement has been established and improved, and to communicate the significant changes from AS9100, Rev. B to Rev. C focusing on reasons for revisions. The proposed schedule and considerations on the transition of the changes to Rev. C are also dealt with in this paper.

• International Journal of Quality Innovation
• /
• 제3권2호
• /
• pp.159-173
• /
• 2002

Any organization's Six Sigma program may be at high risk without heeding the lessons learned from the past and that tries to operate without a robust business foundation. A foundation that preferably should consist of stepping-stones such as a 5-S house-keeping program, an effective Integrated Management System (IMS), which includes a strong focus on planning for quality to fully capture the Voice of the Customer (VOC), and an organization-wide training scheme, as well as a reliable Cost of Poor Quality (COPQ) system. That's the best advise I can give to any organization that wishes to embark on a Six Sigma improvement program and hope to be successful. The paper will elaborate on the above issues and provide suggested solutions based on the review of published historical information and the experiences encountered over the last four decades by the author, as a quality practitioner and consultant, in industries that produced safety-critical product. This author maintains that few fundamentally new or useful things have been created in the field of Quality during the last couple of decades. Nevertheless, this paper deliberates on a number of relatively “newer” issues including the concept of “three types of customers”, the CTC, “Critical To Customer” term, the eight Quality Management Principles of the new ISO 9000 family, the growth of industry-specific standards, the adoption of Integrated Management Systems, the rebirth of AS2561 COQ standard, the spread of Six Sigma as well as related ASQ certification and the need for a robust business foundation to ensure Six Sigma survival.

• 한국안광학회지
• /
• 제19권2호
• /
• pp.231-237
• /
• 2014

목적: 자동굴절력계의 굴절력 값과 포롭터를 이용한 안경처방 굴절력 값에서, 굴절값 차이의 대소가 나타나는 조건을 연구하였다. 방법: 자동굴절력계(SR-7000)와 자동포롭터(AV-9000)를 이용하여 안질환이 없고, 굴절 이상으로 근용안경을 착용하는 30명을 대상으로 총 60안을 검사 하였다. 검사자에 기인한 굴절력 처방값의 변화를 방지하기 위하여, 2명의 검사자가 동일한 검사 조건에서 피검사자의 눈을 측정하였다. 결과: 통계적으로 2명의 검사자의 굴절력 처방값은 유의할만한 차이가 없었다. 대부분의 측정값에서 포롭터를 이용한 안경처방 굴절력 값이 자동굴절력계를 통해 측정된 굴절력 값보다 작게 측정되었다. 근시에서 (-)구면 굴절력 값이 클수록 자동굴절력계의 측정값과 자동포롭터 처방값 간의 차이가 증가하는 현상은 찾아 볼 수 있었다. 근시성 난시안에서 난시도수의 구간별로 결과를 분석하였다. 난시도수가 증가할수록 자동굴절력계와 자동포롭터 값 사이의 차이는 적어지는 경향을 확인할 수 있었다. 결론: 2명의 검사자의 처방값 간의 차이는 없었다. 자동굴절력계의 굴절력 값과 포롭터를 이용한 안경처방 굴절력 값 차이는 근시나 근시성 난시의 경우 피검사자의 굴절 이상도에 대략 비례한다. 피검사자의 교정 렌즈의 굴절력이 클수록 굴절력 차이가 증가하므로, 교정 렌즈 처방 시 주의가 요구된다.

• 한국정보처리학회논문지
• /
• 제6권3호
• /
• pp.622-632
• /
• 1999

As the complexity of software development is increasing due to networking, multimedia, and diverse system architecture, the need for effective software development methodology is increasing. Especially, due to software standard and internalization of software market, it is necessary to accept international quality such as ISO 9000-3. In addition, object oriented development methodology is required due to rapid propagation of OO technology and standardization. Recently, UML was accepted by the OMG as standard object-oriented modeling language for distributed environment. When we UML was accepted by the OMG as standard object-oriented modeling language for distributed environment. When we develop Java and CORBA-based software, often UML is applied to Java and CORBA-based projects. However, current structural or OMT-based object-oriented methodologies. In this paper, we proposed UML-based development and concrete guidelines for each phase in order to apply UML to software development practically and effectively. Also, we define the transition guidelines and semantics between various development tasks. In addition, the analysis and design techniques of user interface and system development techniques needed in Web application development are presented.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.165-170
• /
• 2007

Purpose: To estimate the shape of root and pulp canal using a dental cone beam computed tomography (CBCT) and to evaluate the accuracy of imaging reformation. Materials and Methods: CBCT images were obtained with incisors, premolars, and molars as the destination by using PSR $9000N^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) and i-CAT (Imaging Sciences International, Inc, USA) cone beam CT unit that have different kind of detector and field of view, and compared these with the shape and the size of actual root and root canal. Results: When the measuring value of cone beam computed tomography concerning to each root's bucco-lingual diameter and mesio-distal diameter was compared with the value of the actual root, it reveals an error range $-0.49{\sim}+0.63$ mm at PSR900N and $-0.97{\sim}+1.14$ mm at i-CAT (P>0.05). It was possible to identify and measure PSR$9000N^{TM}$ Dental CT system to the limit $0.48{\pm}0.06mm$ (P>0.05) and i-CAT CBCT to the limit $0.86{\pm}0.09mm$ (P<0.05) on estimating the size and the shape of root canal. Two kinds of CBCT images revealed the useful reproducibility to estimate the shape of root, but there was the difference to estimate the shape of root according to apparatus. The reproducibility of root shape in the image of three-dimensions at PSR 900N is low such as 0.65 mm in a case of minute root canal. Conclusions: CBCT images revealed higher accuracy of the imaging reformation for root and pulp and clinically CBCT is a useful diagnostic tool for the assessment of root and canal. However, there are different qualities of imaging reformation according to CBCT apparatus and limitation of reproducibility for minute root canals.