• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.41-48
• /
• 1974

The author has selected 70 non-extraction and extraction cases. The linear measurements were made in the maxillary dental cast at pre-and post-treatment. The purpose of this study was to detect out the changes occured during orthodontic treatment. On the basis of findings of this study, the following results are made: 1. In extraction cases: 1) The maxillary intercanine width increased. 2) The maxillary dental arch width decreased. 3) The maxillary inter first molar width decreased. 4) The maxillary dental arch length decreased. 5) The maxillary dental arch length (I-3) increased. 2. In non-extraction cases, the maxillary intercanine width decreased in Angle's class III.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.31-40
• /
• 2016

In order to investigate the change in soil arch structure developed within the soil subjected to trapdoor movement, various responses in the deformed particle assembly were observed via photoelastic measurement technique. The particle assembly was composed of the regularly stacked model particles coated by thin photoelastic material. Variation of the internal structure transmitting contact forces were observed by taking images showing the photoelastic responses and compared with the change in slip lines and pressures measured by load cells placed beneath the assembly. Initial soil arch structure established immediately after the trapdoor movement collapsed progressively and meanwhile a new extended structure was developed against further movement of the trapdoor. For the sufficient movement of the trapdoor, initially identical regions bounded by the soil arch structure and slip lines were separated and the region enclosed by slip lines became a part of the region loosing the transmitting contact forces identified by photoelastic measurement.

• The Korean Journal of Applied Statistics
• /
• v.12 no.2
• /
• pp.479-490
• /
• 1999

선형시계열모형인 AR(1)모형과 비선형시계열모형인 RCA(1), ARCH(1)모형에서 이상치(Outlier)가 존재할 경우 최소제곱추정량과 M추정량간의 점근상대효율(Asymptotic Relative Efficiency: ARE)을 구하여 두 추정량의 로버스트 성질을 비교·분석하였다. 또한 여러 유계함수(Huber, Tukey, Andrews, Hampel)들을 M추정함수에 적용하여 각각의 유계함수들을 비교·분석하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.485-500
• /
• 1999

The systematic forecast of interest rates with liberalization was on the rise to important problems in the money market. Liberalization and globalization of the money market produced a seriously change as a compatition among the money market. Profits of an organ of monetary circulation are, also, definitively influenced by a change of interest rates. Hence most of the organ of monetary circulation studied to a scientific and systematic analysis for deterministic factors which have an effect on interest rates and progress development of a forecasting model of interest rates. In this paper, we develope the forecasting system which has highly forecasting performance based on a number of time series models for interest rates and discuss practical use of this system.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.17-27
• /
• 1998

Study on growth change of dental arch is considered to both an important data in orthodontic diagonsis and treatment planning as well as analysis of treatment results , also, arch form is important in anthropology and dentistry, even more so in prosthodontics and orthodontics. In the field of orthodontics, studies on the functional aspect of upper and lower teeth and maintenance of stability of dentition and occlusion were carried out from the early days. Some of the early studies include explanation of growth change in dental arch from measuring directly fom human stroll, and afterwards, cephalometrics x-rays were introduced; accordingly, studies using cephalometric measurement and linear measurements of study models were often performed. By this method, arch width, arch depth and perimeters were measured, and growth change or dental arch was studied. The subject ror this study were sn children(boys and girls or ages from 3 yens to 12 years from Kang-won district and Seoul, who has no history of orthodontic treatment and who show healthy status and normal growth and development. Cephalometric x-ray, panoramic x-ray, and study model were taken for each subject consecutively for 2 years, and the subjects are still followed up. 400 pairs of study models from the past two years were used in this study; mesio-distal diameater of each tooth, intercanine width, intermolar width, canine depth, molar depth and arch perimeters were measured. Afterwards, mean value and each standard deviation of each age group and each gender were obtained, and representation graph were drawn. The following conclusion were obtained. 1. Intercanine width showed gradual increase until the age of 10-years and after that, showed no increase. 2. Intermolar width in upper arch showed gradual increase : intermolar width in lower arch showed no significant chang, and after the age of 9-years, showed increase. 3. Cainine arch depth showed relatively rapid increase after the age of 6-years, and this pattern was more obvious in lower arch. 4. Molar arch depth increased gradually in both archs and it decrease after the age of 10-years : this phenomenon was more prominent in the lower arch. 5. Arch perimeter showed gradual inerease and convert to plateau at the age of 10-years, after that, it decreased. this pattern was more prominent in lower arch.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.17-32
• /
• 1996

It is important to understand the operating mechanism and force system of fixed appliance that most effective for individual tooth movement in various orthodontic appliances. The archwire system of fixed appliance is devided into 3 types, which is continuous arch, segmented arch and sectional arch. The last two types have longer interbracket distance and simple force operating points, so it is easy to control force system by operator. But the continuous arch has shorter interbracket distance and various bracket geometry, so it is hard to control and anaylze the force system. The purpose of this study was three dimentional force and moment analysis of continuous arch system by finite element method, which is similar situation to three dimentional elastic beam in structural engineering. Several sample form of various bracket geometry and artificial lower crowding typodont made by author were constructed, analyzed and compared each other. The results were as follows : 1. The force magnitude is linear proportional to the degree of displacement or tilting of the bracket. 2. The force magnitude is inversely non-linear proportional to the interbracket distance. 3. In three dimensional typodont model, while the force can be compared with that of the sample form in the area where adjacent bracket geometry is simple, the force is much more than the expected value in the area where adjacent bracket geometry is complex.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.285-294
• /
• 2002

Embankment Piles, which is subjected to damage due to lateral movement of soft ground, can be classified into pile slab, cap beam pile, and isolated cap pile according to the installation pattern of pile cap. In the cap beam pile and the isolated cap pile method, the soil arch is developed by the different stiffness between pile and soil, and most embankment loads are transferred into embankment piles through soil arch. In these two methods, the difference of soil arch is that the soil arch of the cap beam pile method develops like the arch from of tunnel between cap beams and the soil arch of the isolated cap pile method develops like dome between isolated caps. Therefore, theoretical analysis methods on soil arching effect of the cap beam pile and the isolated cap pile method were respectively proposed according to their own arch form considering the limiting equilibrium of stresses in a crown of soil arch. And a series of model tests were performed both to investigate the load transfer by soil arching in fills above embankment piles and to verify the reliability of the theoretical analysis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.317-328
• /
• 2006

Purpose: This study was performed to measure the accuracy of adjustable dental impression trays by a scanning laser three-dimensional digitizer. Materials and Methods: Metal stock tray and adjustable stock trays were used for 40 stone casts(10 casts each) duplicated a resin master model of mandible and maxilla. The type IV dental stone was poured in a allginate impressions and allowed to set for one hour. The casts were digitized using an optical digitizer. The distance between the reference points were measured and analyzed on the graphic image of 3-D graphic software (CATIA version 5.0). The statistical significance of the differences between the groups was determined by a two-way ANOVA. Results: There were no significant differences between the accuracies of the adjustable stock tray and the master model except anterior arch width of the upper arch and the diagonal arch length and arch length(one side) of the lower arch. Conclusion: The adjustable stock trays showed clinically acceptable accuracies of the study casts produced by them.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.453-465
• /
• 2005

Purpose: This study was performed to measure the accuracy of adjustable dental impression trays by a scanning laser three-dimensional digitizer. Materials and methods: The metal stock, individual, and adjustable stock trays were used for 60 stone casts(10 casts each) duplicated a resin master model of mandible and maxilla. The type IV dental stone was poured in a vinyl polysiloxane impressions and allowed to set for one hour. The master model and the duplicated casts were digitized using an optical digitizer. The distance between the reference points were measured and analyzed on the graphic image of 3-D graphic software(CATIA version 5.0). The statistical significance of the differences between the groups was determined by a two-way ANOVA. Results : There were no significant differences between the accuracies of the adjustable stock tray and the master model except only anterior arch width on the upper arch and the diagonal arch length and arch length on one side of the lower arch. Conclusion: The adjustable stock trays showed clinically acceptable accuracies of the study cast produced by them.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.10a
• /
• pp.153-161
• /
• 1993

시간변동모수 공적분(Time-Varying Parameter Cointegration) 모형에서 시간변동모수가 안정적인 확률과정을 따르는 경우 BI(bi-integrated) 과정을 오차항으로 갖는 고정모수 공적분 모형과 동일하다. 이 때 BI과정은 ARCH 과정과 조건부분산이 동치관계에 있음을 이용하여 소득과 비내구재(서비스) 소비의 시간변동모수 공적분 관계를 추정하였다. 이로부터 합리적기대 항상소득가설을 검증한 결과 고정모수 공적분 모형과 달리 가설을 기각할 수 없는 것으로 나타났다.