• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.514.3-515
• /
• 1986

λP$_{L}$ promoter와 Infiuenza virus의 NS1 Structural gene이 있는 pASl EH801 plasmid를 E. coli host N5' 과 AR120에 각각 transformation하여 온도와 nalidixic acid로 각각 induction 하여 보았다 N5151의 경우, O.D.600 1.2에서 42$^{\circ}C$로 induction하였을 때 maximum productivity를 보였으며 AR120의 경우는 O. D. 600 1.2, 37$^{\circ}C$, 40$\mu\textrm{g}$ nalidixic acid/$m\ell$ induction 하였을 때 maximum yield를 보여주었다. 이때 pH, DO, temperature, $O_2$%, $CO_2$%를 A/D converter통해 computer에 연결시켜 data acquision을 한 결과, 접종 후 ON-line induction이 가능함을 알 수 있었다.

• Journal of Powder Materials
• /
• v.11 no.1
• /
• pp.16-21
• /
• 2004

The nano-sized Co particles were successfully synthesized by chemical vapor condensation (CVC) process using the precursor of cobalt carbonyl ($Co_2(CO)_8$). The influence of carrier gases on the microstructure and magnetic properties of nanoparticles was investigated by means of XRD, TEM, XPS and VSM. The Co nano-particles with different phases and shapes were synthesized with a change of carrier gas : long string morphologies with coexistence of fcc and hcp structure in Ar carrier gas condition; finer Co core in a mass of cobalt oxide with only fcc structure in He; rod type cobalt oxide phase in Ar＋6vol％$O_2$. The saturation magnetization and coercivity was lower in Co nanoparticles synthesized in He carrier gas, due to their finer size.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.11
• /
• pp.508-511
• /
• 2003

In this paper, electrical characteristics of inductively coupled plasma in an electrodeless fluorescent lamp were investigated using a Langmuir probe with a variation of argon gas pressure. The RF output was applied in the range of 5 ∼ 50 (W) at 13.56 (MHz). The internal plasma voltage of the chamber and the probe current were measured while varying the supply voltage to the Langmuir probe in the range of -100 (V) ∼+100 (V). When the pressure of argon gas was increased, electric current was decreased. There was a significant electric current increase from l0W to 30 〔W〕. Also, when the RF power was increased, electron density was increase. This implies that this method can be used to find an optimal RF rower for efficient light illumination in an electrodeless fluorescent lamp.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.197-200
• /
• 2001

Novel Enhanced Inductively Coupled Plasma is applied to etch $SiO_2$. Effect of $O_2$ or Ar addition to $C_{4}F_{8}$ gas is monitored by Optical Emission Spectroscopy and Quadrupole Mass Spectrometer. It is fund that Ar or $O_2$ dilution to $C_{4}F_{8}$ increases F emission intensity and decreases $CF_2$ intensity. However, the ac frequency to the Helmholtz coil decreases the F intensity and thus increases $CF_2$/F ratio. By adjusting the ac frequency, the optimum etch rate and PR to $SiO_2$ selectivity can be obtained in E-lCP.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.767-770
• /
• 2012

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual-feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are $28mm{\times}28mm{\times}4mm$, which is the most compact size among the dual-band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.5
• /
• pp.33-37
• /
• 2003

This study was performed to investigate the deposition mechanism of SiO$_2$ by ArF excimer laser(l93nm) CVD with Si$_2$H$\_$6/ and N$_2$O gas mixture and evaluate laser CVD quantitatively by modeling. With ArF excimer laser CVD, thin films can be deposited at low temperature(below 300$^{\circ}C$), with less damage and good uniformity owing to generation of conformal reaction species by singular wavelength of the laser beam. In this study, new model of SiO$_2$ deposition process by laser CVD was introduced and deposition rate was simulated by computer with the basis on this modeling. And simulation results were compared with experimental results measured at various conditions such as reaction gas ratio, chamber pressure, substrate temperature and laser beam intensity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.103-106
• /
• 2006

Semiconductor laser diode has a reflective facet in a both-ends side fundamentally. Laser performance for improving, Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing superluminescent diode and reducing the reflection-induced intensity noise of laser diode, it's key techniques are AR/HR coatings. In the study AR coating film were manufactured by Ion-Assisted Deposition(IAD) system. Then manufactured coating film measurement electrical properties(L-I-V, Se, Resistor) and Optical properties (wavelength FFP)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.934-941
• /
• 2000

We measured the electron transport coefficients, the electron drift velocity W and the longitudinal diffusion coefficient $D_{L}$ in the 0.526% and 5.05% $C_{3}F_{8}$-Ar mixtures over the E/N range from 0.01 Td to 100 Td by the double shutter drift tube, and compared the measured results by Hunter et al. with those. We determined the inelastic collision cross sections for the $C_{3}F_{8}$ molecule by the comparison of the present measurements and the calculation of electron transport coefficients in the $C_{3}F_{8}$-Ar mixtures by using a multi-term Boltzmann equation analysis.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.11-16
• /
• 2005

Humic substances(HS) from raw and process waters at a conventional water treatment plant were isolated and extracted by physicochemical fractionation methods to investigate their characteristics. They are characterized for their functionality, chemical composition, and spectroscopic characteristics using FT-IR(Fourier transform infrared) and $^1H-NMR$(proton nuclear magnetic resonance) spectroscopy. Humic fraction gradually decreased from 47.2% to 26.4%(from 0.97 to 0.54 mgC/L) through conventional water treatment processes. Concentration of phenolic groups in the HS fraction gradually decreased from 60.5% to 21.8%(from 12.2 to $6.0\;{\mu}M/L$ as phenolic-OH) through water treatment. In the case of carboxylic groups, the concentration increased from 39.5% to 46.9%(from 7.9 to $10.6\;{\mu}M/L$ as COOH) by pre-chlorination, but gradually decreased to 34.2%($9.4\;{\mu}M/L$ as COOH) through sedimentation and sand filtration. From the results of the FT-IR and $^1H-NMR$ spectra of HS, the content of carboxylic groups increased and ratio of aliphatic protons to aromatic protons($P_{Al}/P_{Ar}$) also increased through water treatment, which indicated the increase of aliphatic compounds.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2081-2085
• /
• 2013

A quantitative method for determining levels of three bioactive compounds based on pattern recognition was developed and fully validated for the quality control of Alismatis Rhizoma (AR) by HPLC. Separation conditions were optimised using an Optimapak $C_{18}$ column ($250mm{\times}4.6mm$, 5 ${\mu}m$) with a mobile phase of acetonitrile and 0.1% aqueous phosphoric acid and detection wavelengths of 205 and 245 nm. Method validation yielded acceptable linearity ($r^2$ > 0.9998) and percent recovery (98.06%-101.71%). Limits of detection ranged from 0.08 to 0.15 ${\mu}g/mL$. Levels of the three bioactive compounds, alisol C acetate, alisol B, and alisol B acetate, in AR were 0.07-0.45, 0.38-10.32, and 1.13-8.59 mg/g dried weight, respectively. Pattern analyses based on these three compounds were able to differentiate Chinese and Korean samples accurately. The results demonstrate that alisol B and its acetate may be used as marker compounds for AR quality and can be regulated to no less than 0.36 and 1.29 mg/g of dried sample, respectively. The method described here is suitable for quantitative analyses and quality control of multiple components in AR.