• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.1
• /
• pp.25-31
• /
• 2017

This paper aims to evaluate the conservatism in the design of APR1400 (Advanced Pressurized water Reactor 1400 designed by KHNP) reactor internals component, the LSS (Lower Support Structure). Re-engineering of the LSS is done based on the system design condition data and applicable ASME code that was used for the original APR1400 design. Systems engineering approach is applied to design the LSS of APR1400 without refering APR1400 LSS dimensional parameters and tries to verify important design parameters of APR1400 LSS as well as the validity of the re-engineering design process as independent verification method of reactor component design. Systems engineering approach applied in this study following V-model approach. The re-engineered LSS design showed more than enough conservatism for static loading case. The maximum deflection of LSS is under 1mm (calculated value is 0.25mm) from 4000 mm diameter of LSS. Hence the deflection can be ignored in other reactor internals for structural integrity assessment. Especially the effect of LSS deflection on fuel assembly can be minimized and which is one of the main requirements of LSS design. It also showed that the maximum stress intensity is 2.36MPa for the allowable stress intensity of 60.1 MPa. The stress resulted from the static load is also very small compared to the maximum allowable stress intensity, hence there is more than enough conservatism in the LSS design.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.948-953
• /
• 2009

Apple and apricot powders (APL-P and APR-P) were produced from apple and apricot fruits and they were used in cookie formulation at the levels of 10-40% (in flour bases). The APL-P and APR-P were rich in terms of total dietary fiber (TDF) and antioxidant power. The APR-P supplemented cookies had higher spread ratio and lower hardness values than the APL-P supplemented ones at all addition levels. The color values of the APR-P supplemented cookies were all acceptable. Overall sensory scores of the cookies supplemented with APL-P and APR-P were not significantly different from the control up to 20% addition. TDF contents of the supplemented cookies increased significantly with increasing addition level (p<0.01). The replacement of flour by APL-P and APR-P in wire-cut cookies showed that the physical characteristics and textural properties of the cookies were significantly affected (p<0.01) and APR-P appeared to be a more suitable replacer of flour than APL-P. Addition of both fruit powders upto 20% into the cookie formulation were evaluated as acceptable in terms of the sensory properties.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.175-184
• /
• 1997

The objective of this paper is to study arelationship between maximum response and its standard deviation of rotational shells that are subjected to uneven settlements. For this, the ratio, .eta, of the maximum response to standard deviation and it's approximate, .eta./sub apr/, are investigated by stochastic methods. Also, an equation for .eta./sub apr/, that is a function of predominant harmonic number is suggested. The settlements are represented by the Fourier series. Each term in the series contains two coefficients; the amplitude and the phase angle. It is assumed that phase angles are random variables and amplitudes are deterministic. To investigate the characteristics of .eta. and .eta./sub apr/, 100 phase angles for two types of artificial amplitudes spectra are used in the analysis. .eta. and .eta./sub apr/, are almost constant regardless of amplitude type, position of a shell or type of responses; they fall into from 2.0 to 2.5. .eta./sub apr/ is always close to .eta., but tends to be somewhat greater. It may be concluded that a maximum responses of rotational shells subjected to uneven settlements are .eta./sub apr/ (about 2.5) times of its standard deviation. It is considered that this result is used when we design rotational shell structures subjected to differential settlements.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.8-14
• /
• 1996

Bacillus subtillis strains with transition state regulator mutations and a spore mutation were developed for the overexpression of apsE and for the enhancement of expression level. Among the many regulator genes, degU and hpr were chosen as a representative positive and negative regulator for the aprE, respectively. Spo II G was used for the construction of asporogeneous strains. All the mutants were constructed from two protease-deleted strain DB104 and the apsE gene was transformed with an integration vector pMK101. DB104(deg$U^h$(32) $his^+$)::pMK101(Cm) and DB104($\Delta$her(Em))::pMKl01(Cm) show 7-fold and about 2-fold increase in aprE expression level, respectively. But the effect of transition state regulator mutation on the aprE expression was diminished when the integrated aprE gene was amplified by the high concentration of chloramphenicol, i. e. 30 $\mu\textrm{g}$/ml. DB104($\Delta$spoIIG(Pm) degUh(32) his+)::pMK101(Cm) and DB104($\Delta$spoIIG(Pm) $\Delta$hpr(Em))::pMK101 double mutant show 10-fold and 3-fold increase in aprE expression level, respectively. The results suggest that sporulation mutation and transition state regulator mutation have independent and additive effect on the aprE expression, and the same gene dosage effect on the transition state regulator mutation was also identified.

• Microbiology and Biotechnology Letters
• /
• v.28 no.1
• /
• pp.14-20
• /
• 2000

The transformation of Bacillus subtilis K-54 and J-10 was carried out with constructed vectors containing structure and enhancer genes of aprN and prtR, to increase their fibrinolytic enzyme activity. Bands for the aprN and prtR genes were identified from B. subtilis J-10 by PCR that was carried out with the constructed primers for the genes. In addition, the gene fragments contained promoter site based on the results of analysing their nucleotide sequence. The two gene fragments, aprN and prtR, obtained by the PCR, were, then, inserted to vector such as T-vector and E.coli/Bacillus shuttle vector. The constructed vector were designated as pAPR2 (aprN), pENC2 (prtR) and pFLA1 (aprN and prtR), respectively. The constructed vector was used for transformation of the strains of B.subtilis J-10 and B. subtilis K-54 and the fribrinolytic activity of the transformed strains was investigated. The introduction of the vector, pAPR2 and the fibrinolytic activity of the transformed strains was investigated. The introduction of the vector, pAPR2 and pFLA1, resulted in the increase of fibrinolyitic enzyme activity in B. subtilis J-10 by 27.3% and 16%, respectively. However, the introduction of pENC2 to B. subtilis J-10 did not seem to induce increase of the enzyme activity. The strain of B.subtilis K-54 transformed with pENC2 showed an increased fibrinolytic activity by 5 folds compared with that of the original strain of B. subtilis K-54.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.102-105
• /
• 2014

In accordance with U.S. Nuclear Regulatory Commission regulatory guide(NRC RG) 1.20(Rev.3), we are writing a comprehensive vibration assessment program(CVAP) design control document(DCD) and a technical report for U.S. NRC design certification(DC) of an Advanced Power Reactor 1400(APR1400) nuclear power plant(NPP). CVAP of an APR1400 NPP for U.S. NRC DC is classified as a non-prototype category 1 type. Therefore, CVAP DCD of reactor vessel internals(RVI) and steam generator internals(SGI) consist of analysis and full inspection program. However, piping system of primary and secondary system will be described as measurement program.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.963-970
• /
• 2018

The U.S. Nuclear Regulatory Commission, Regulatory Guide 1.20 needs to perform a comprehensive vibration assessment program for reactor internals during preoperational and startup testing for nuclear power plants and extended power uprate. Although the measurement program is one of the core programs, it is rarely carried out except for a first-of-a-kind or a unique design. This article describes measurement results of vibration and stress for the comprehensive vibration assessment program for an APR-1400 reactor internals. The measurement was performed at an upper guide structure during the pre-core hot functional test of Shin Kori unit 4 reactor internals because the Shin Kori unit 3 and 4 are the first construction project for the APR-1400, and the upper guide structure assembly was to design change compared with the valid prototype. We confirmed that all measured results are within the test acceptance criteria. It means that the structural integrity of the APR-1400 reactor internals was secured for the flow-induced vibration.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.3
• /
• pp.207-212
• /
• 2013

APR1000(Advanced Power Reactor 1000) was developed to export 1000MW nuclear power plants by adding ADFs(Advanced Design Features) including 60 years design life, local frequency control operation, 0.3g SSE, etc. to OPR1000(Optimized Power Reactor 1000). In this paper, environmental fatigue analyses for the reactor vessel in APR1000 have been performed as per Reg. Guide 1.207. Outlet nozzle, which has a relatively high cumulative usage factor in the reactor vessel was evaluated and a structural integrity is maintained under the reactor coolant environment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.474-479
• /
• 2012

A comprehensive vibration assessment program for the advanced power reactor 1400(APR1400) reactor vessel internals is established in accordance with the united states nuclear regulatory commission regulatory guide 1.20 revision 3. This paper is related to instruments and measurement locations based on the vibration and stress response analysis results of the inner barrel assembly top plate in APR1400. The analysis results of the inner barrel assembly top plate in the reactor show that the deterministic stress and deformation due to the reactor coolant pump induced pressure pulsations are larger than the random stress and deformation induced by the flow turbulence. The selection of the instruments and measurement locations at inner barrel assembly top plate in the reactor is essential requirements and very important study process for the vibration and stress measurement program in comprehensive vibration assessment program for APR1400 reactor vessel internals.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.84-91
• /
• 2003

Flow-Induced Vibration of steam generator tubes may result in fretting wear damage at the tube-to-support locations. KSNP(Korean Standard Nuclear Power plant) steam generators experienced fretting wear in the upper part of U-bend above the central cavity region of steam generators. This region has conditions susceptible to the flow-induced vibration, such as high flow velocity, high void fraction, and longer unsupported span. To improve its performance, APR1400 steam generator is designed with additional supports in this region to reduce unsupported span and to reduce peak velocity in the central cavity region. In this paper, we examined its performance improvement using ATHOS code. The thermal-hydraulic condition in the region of secondary side of APR1400 steam generator is obtained using the ATHOS3 code. The effective mass for modal analysis is calculated using the void fraction, enthalpy, and operating pressure information from ATHOS3 code result. With the effective mass distribution along the tube, natural frequency and mode shape is obtained using ANSYS code. Finally, stability ratios and real mean squared displacements for selected tubes of the APR1400 steam generator are computed. From these results, the current design of the APR1400 steam generator are examined.