• 융합보안논문지
• /
• 제18권2호
• /
• pp.33-40
• /
• 2018

ICT 기술이 다양한 교육 분야에 적용되고 있지만 교육 평가 분야에 적용은 제한적이다. 컴퓨터 기반 평가는 기존의 지필평가에 비해 시간적/공간적 제약을 넘어서는 장점을 가지며 있지만 시험 당사자들의 부정행위에 취약하다. 본 논문에서는 컴퓨터 기반 평가의 보안성을 강화하기 위하여 실시간 모니터링 및 프로세스 관리 방안을 제안한다. 제안된 방식에서는 시험 화면을 주기적으로 캡처하여 교수 화면에 표시하여 실시간 감시가 가능하도록 하고 부정행위에 사용될 프로세스를 시험 전에 차단할 수 있도록 한다. 많은 학생들의 화면을 실시간으로 감시하기 위해서는 캡처된 원본 이미지의 효과적인 압축이 중요하다. 이를 위하여 이미지 압축 모듈의 사용, 해상도 약화, 재 압축의 3단계 압축 방식을 적용하였다. 이를 통하여 약 6MB의 원본 이미지를 약 3.8KB의 저장 이미지로 변환하였다. 부정 프로세스 차단 기능을 위하여 윈도우즈 API를 이용한 프로세스 추출 및 관리 기능을 사용하였다. 새로운 보안 강화 방안이 적용된 본 논문의 컴퓨터 기반 평가 시스템이 기존의 컴퓨터 기반평가 시스템과의 보안 관련 기능 비교를 통하여 우수함을 보여준다.

• Parasites, Hosts and Diseases
• /
• 제52권1호
• /
• pp.1-7
• /
• 2014

Plasmodium vivax reemerged in the Republic of Korea (ROK) in 1993, and is likely to continue to affect public health. The purpose of this study was to measure levels of anti-P. vivax antibodies using indirect fluorescent antibody test (IFAT) in border areas of ROK, to determine the seroprevalence of malaria (2003-2005) and to plan effective control strategies. Blood samples of the inhabitants in Gimpo-si, Paju-si, and Yeoncheon-gun (Gyeonggi-do), and Cheorwon-gun (Gangwon-do) were collected and kept in Korea Centers for Disease Control and Prevention (KCDC). Out of a total of 1,774 serum samples tested, the overall seropositivity was 0.94% (n=17). The seropositivity was the highest in Paju-si (1.9%, 7/372), followed by Gimpo-si (1.4%, 6/425), Yeoncheon-gun (0.67%, 3/451), and Cheorwon-gun (0.19%, 1/526). The annual parasite incidence (API) in these areas gradually decreased from 2003 to 2005 (1.69, 1.09, and 0.80 in 2003, 2004, and 2005, respectively). The highest API was found in Yeoncheon-gun, followed by Cheorwon-gun, Paju-si, and Gimpo-si. The API ranking in these areas did not change over the 3 years. The seropositivity of Gimpo-si showed a strong linear relationship with the API of 2005 (r=0.9983, P=0.036). Seropositivity data obtained using IFAT may be useful for understanding malaria prevalence of relevant years, predicting future transmission of malaria, and for establishing and evaluating malaria control programs in affected areas.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.109-115
• /
• 2018

Electrical Resistance Welding (ERW) on a longitudinal seam-welded pipe has been extensively used in oil and gas pipelines. It is well known that the weld zone commonly suffers from grooving corrosion in ERW pipes. In this paper, the grooving corrosion performances of API X65 grade non-sour service (steel-A) and API X70 grade sour gas resistant (steel-B) steel electrical resistance welding pipelines were evaluated. The microstructure of the bondline is composed of coarse polygonal ferrite grains and several elongated pearlites. The elongated pattern is mainly concentrated in the center of the welded area. The grooving corrosion test and electrochemical polarization test were conducted to study the corrosion behavior of the given materials. A V-shaped corrosion groove was found at the center of the fusion zone in both the steel-A and steel-B ERW pipes, as the corrosion rate of the bondlines is higher than that of the base metal. Furthermore, the higher volume fraction of pearlite at the bondline was responsible for the higher corrosion rate at the bondline of both types of steel.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.88-92
• /
• 2006

Large-scale model tests of welded topside joints were carried out to observe the fatigue behavior of API 2W Gr.50 steel produced by POSCO. The fatigue crack behaviors for various loading conditions were measured and investigated around the critical joint sections. The experimental results have been verified with numerical approaches and also compared with the AWS D1.1 and DnV RP-C203 design curves. The large-scale experiment models were fabricated, based on the actual operating east area fixed platform. The dimensions of the models were slightly modified to accommodate the test facilities and capacities. The fatigue test was carried out having ${\Delta}Q$ of T1=705.6kN, T2=749.7kN and T3=793.8kN. The three specimens were statically loaded 20 times, with various loadings of about 50kN intervalsbetween the maximum and minimum loads required in the fatigue tests. This loading removed the residual stress in the specimen before the fatigue tests. The topside joint crack was initiated from the brace heel, where the maximum tensile stress occurred. The API 2W Gr.50 steel satisfied the AWS D1.1 detail category C and DnV RP-C203 detail category F ${\Delta}S-N$ curve.

• 한국가스학회지
• /
• 제5권3호
• /
• pp.15-22
• /
• 2001

세계적으로 천연가스의 사용은 높은 효율을 가진 청정에너지로서의 장점으로 인하여 꾸준히 증가하는 추세이며, 국내에서도 급격한 경제규모의 증대와 함께 사용량이 증가하고 있다. 천연가스 배관 용접부는 금속학적 및 역학적으로 파괴에 영향을 미치는 인자들을 다양하게 가지고 있는데, 이들 인자들에 의하여 파괴역학적 인성의 열화가 발생함과 동시에 파괴시험 결과의 해석에 많은 어려움이 유발된다. 본 연구에서는 우선 국내 천연가스의 주 배관으로 사용되고 있는 API 5L X65 등급의 고장력강 용접부의 파괴역학적 안전성을 평가하기 위한 목적으로, 실제 원주 용접부와 심 용접부의 파괴인성 시험을 수행하여 미세조직의 변화를 중심으로 미시적 혹은 거시적인 관점에서의 금속학적 인자가 파괴인성에 미치는 영향에 대해 평가하였다.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.151-164
• /
• 2021

During the pipe forming process, a steel plate undergoes inelastic behavior multiple times under a load condition repeating tension and compression in the circumferential direction. It derives local reduction or increase of yield strength within the thickness of steel pipes by the plastic hardening and Bauschinger effect. In this study, a combined hardening model is proposed to effectively predict variations of yield strength in the circumferential direction of API-X65 and X70 steel pipes with relatively low t/D ratio during the forming process, which is expected to experience accumulated plastic strain of 2~3%, the typical Lüder band range in a low-carbon steel. Cyclic tensile tests of API-X65 and X70 steels were performed, and the parameters of the proposed model for the steels were calibrated using the test results. Bending-flattening tests to simulate repeated tension and compression during pipe forming were followed for API-X65 and X70 steels, and the results were compared with those by the proposed model and Zou et al. (2016), in order to verify the process of material model calibration based on tension-compression cyclic test, and the accuracy of the proposed model. Finally, parametric analysis for the yield strength of the steel plate in the circumferential direction of UOE pipe was conducted to investigate the effects of t/D and expansion ratios after O-forming on the yield strength. The results confirmed that the model by Zou et al. (2016) underestimated the yield strength of steel pipe with relatively low t/D ratio, and the parametric analysis showed that the t/D and expansion ratio have a significant impact on the strength of steel pipe.

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.54-65
• /
• 2002

Black-pigmented bacteria have been implicated in the endodontic infections. This group of microorganisms includes Porphyromonas endodontalis, Porphyromonas gingivalis, Prevotella intermedia, and Prevotella nigrescens. The organisms display a wide variety of virulence factors that may be pertinent to acute endodontic infections. The aim of this study was to identify P. endodontalis, P. gingivalis, P. intermedia, and P. nigrescens by using special potency disk test, filter paper spot test, 165 rRNA gene-directed PCR, and API 32A. Microbial samples were collected from root canals of 33 intact teeth with necrotic pulp and/or apical periodontitis. Conventional laboratory methods were used for identification of the strains of black pigmented bacteria. Eighteen of 33 samples were positive for the growth of black-pigmented bacteria Five colonies were cultured from each pure cultured colonies from Brucella agar plate. Seventy seven colonies were positive for the growth of black-pigmented bacteria. Thirty three of 77(42.6%) were identifed as P. nigrescens, 10 of 77(12.9%)were P. gingivalis, 6 of 77(7.8%) were P. endodontalis, 10 of 77(12.9%) were P. intermedia. On the contrary the reference strains of P. nigrescens, experimental strains of P nigrescens was sensitive to kanamycin in special potency disk test. 165 rRNA gene PCR and API test after rapid presumptative identification methods, such as special potency disk test and filter paper spot test, would be accurate detection methods for black-pigemented bacteria.

• 대한임상검사과학회지
• /
• 제38권1호
• /
• pp.45-53
• /
• 2006

Anaerobic black-pigmented bacteria have been implicated in the endodontic infections. This group of microorganisms includes Porphyromonas endodontalis, P. gingivalis, Prevotella intermedia, and Prevotella nigrescens. The organisms display a wide variety of virulence factors that may be pertinent to acute endodontic infections. The aim of this study was to identify P. endodontalis, P. gingivalis, P. intermedia, and P. nigrescens by using the special potency disk test, filter paper spot test, 16S rRNA gene-directed PCR, and API 32A system. Microbial samples were collected from root canals of 33 intact teeth with necrotic pulp and apical periodontitis. Conventional laboratory methods were used to identify the strains of anaerobic black pigmented bacteria. Eighteen out of 33 samples were positive for the growth of black-pigmented bacrteria. Five colonies were cultured from each pure cultured colony from Brucella agar plates. Seventy seven colonies were positive for the growth of black-pigmented bacteria. Thirty three out of 77(42.8%) were identifed as P. nigrescens, 10 out of 77(13%)were P. gingivalis, 6 out of 77(7.8%) were P. endodontalis, 10 out of 77(13%) were P. intermedia. On the contrary the reference strains of P. nigrescens, experimental strains of P. nigrescens were susceptible to kanamycin in the special potency disk test. We concluded that after rapid presumptive identification methods, such as the special potency disk test and filter paper spot test were done, 16S rRNA gene PCR and API 32A test would be accurate detection methods for black-pigemented bacteria.

• 한국통신학회논문지
• /
• 제35권3B호
• /
• pp.503-516
• /
• 2010

본 논문에서는 유무선 통합 환경에서 융합 미디어 서비스를 제공하기 위한 통합 프로파일 및 인증 제어 기술로써, 시스템 구현을 통한 결과를 제시한다. 가입자의 접속, 서비스, 이동성, 방송형 프로파일을 관리하고 개방형 API(Application Program Interface)를 통해서 제3사업자에게 가입자 프로파일 정보를 PUSH/PULL 방식으로 제공하는 방안을 제안한다. 이때 개방형 API는 웹 서비스, REST(Representational State Transfer) 기반으로 구현하여 제3사업자가 쉽게 서비스를 제공할 수 있는 방식을 제안한다. 또한, 한번 접속 인증에 성공하면 액세스 망이 변하거나 혹은 IMS(IP Multimedia Subsystem) 기반의 서비스 망에 접속하게 될 때 동일한 인증 정보를 유지할 수 있는 SSO(Single Sign-On) 기능을 제안한다. 제안된 방식은 CUPS(Converged User Profile Server) 시험 네트워크 구현 연구를 통하여 기능 검증 및 성능 분석을 수행하였다.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.93-101
• /
• 2014

This study aims to investigate the effect of heat input of outside SAW weld on low temperature toughness($-20^{\circ}C$) of inside SAW weld for API 5L X70 with sour gas resistance. As increasing heat input of the outside weld, low temperature toughness of the inside weld was decreased. Especially, in spite of the same heat input, the value of low temperature toughness was fluctuated. On the basis of fracture and microstructure analysis, the low temperature toughness is correlated with the fracture area ratio of shear lips and four kinds of fracture sections. These sections were divided with size and shape of dimple correlated with grain boundary ferrite and cleavage correlated acicular and polygonal ferrite in grain. Therefore, it was seen that these sections were two of final solidification area in the inside weld and the outside weld, no reheated zone and reheated zone in the inside weld. In conclusion, it is thought that the difference of low temperature toughness at the same heat input is due to the fact that each of impact test specimens could have the different microstructure, even though the notch was machined under the error tolerance of 1mm. It is because the final solidification area of the inside weld is very narrow.