• 제목/요약/키워드: API Standard

검색결과 212건 처리시간 0.027초

정재하시험 결과를 통한 타입말뚝 지지력 공식의 타당성 분석 (A Study on the Applicability of Bearing Capacity Formulas of Driven Pile by Comparison with the Results of Static Loading Tests)

  • 천병식;이승범
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.544-551
    • /
    • 2004
  • Piles are structural elements made of steel, concrete or timber, and utilize as pile foundation which is one of deep foundations. Driven pile among them, which drives pile into the ground, is fast-constructable, less expensive and it supplies much bearing capacity. For these reasons, its demand is steady. In this study, by selecting the cases which reached ultimate failure during in-situ static loading tests, bearing capacities acquired from these tests were compared with those computed by existing theories and formula. As the results of the analysis, ultimate bearing capacity computed by theoretic formula were less or similar to those of test results in most cases, but lower ground water level and more dense layer where end of piles were reached remarkably high bearing capacity in theoretical methods. ${\beta}-method$ and Korean structure foundation design standard were sensitive to ground physical properties. Meyerhof metbod and API code were relatively independent from site condition.

  • PDF

원유와 석유제품 중의 다환방향족탄화수소류[PAHs] 분포특성과 발생원 (Compositional Characteristics and Origin of Polycyclic Aromatic Hydrocarbons[PAHs] of Crude Oils and Petroleum Products)

  • 정흥호;박은희;최상원
    • 한국환경과학회지
    • /
    • 제15권5호
    • /
    • pp.397-403
    • /
    • 2006
  • Compositional characteristics and origin of polycyclic aromatic hydrocarbons(PAHs), which should be strongly regulated for environmental protection in the crude oils and petroleum products, have been investigated by gas chromatography-mass spectrometry(GC/MS). In the crude oils analyzed, two-rings compound(naphthalene) of PAHs was detected around $72.3\sim93.5%$, but five- or six-rings compound of PAHs was not detected. In the crude oils analyzed, the molecular ratio indices of Phe/Ant(phenanthrene/anthracene)>15, Fla/Pyr(fluoranthene/pyrene)<1, BaA/Chr(benzo (a)anthracene/chrysene)$\leq0.4$ could be effectively applied, and we found that the origin of PAHs was petrogenic sources. Total PAHs concentrations in the crude oils were increased with increasing API gravity and with decreasing sulfur contents of the analyzed crude oils. Five- or six-rings compound of PAHs were not included in ail petroleum products except bunker-C. Furthermore, the molecular ratio indices of Phe/Ant(phenanthrene/anthracene) vs. Fla/Pyr(fluoranthene/pyrene) could be effectively applied as the standard for the PAHs contamination criterion at the other Korean areas.

SEDRIS를 이용한 국방M&S 표준 지형데이터 구축에 관한 연구 (A Study for Construct Standard of Defence M&S Terrain Data Using SEDRIS Technique.)

  • 김종훈;이상훈
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2005년도 추계학술발표대회 및 정기총회
    • /
    • pp.175-178
    • /
    • 2005
  • 국방 M&S에서 사용되는 지형데이터는 각 시뮬레이션의 개발 환경과 개발 요구사항에 따라 서로 다른 형태로 분산저장 되어 각 모델을 통합 하거나, 새로운 모델의 개발 시 많은 시간과 예산을 필요로 하게 된다. 이에 따라 국방부에서는 국방M&S분야의 각종 자료를 표준화 하려는 사업이 진행중이며, 특히 지형 데이터 분야는 모든 M&S모델이 공통적으로 필요로 하는 데이터로서 표준화의 필요성이 매우 높은 분야이다. 본 연구에서는 이러한 지형 데이터를 표준형식으로 저장하고, 네트워크를 통하여 공유할 수 있는 시스템의 구축을 위하여, 환경자료 표현의 국제표준으로 제시된 SEDRIS 기술을 적용 할 것을 제안하고자 한다. SEDRIS는 DRM, EDCS, SRM의 모델을 통하여 합성환경의 다양한 요소를 표현할 수 있으며, API와 STF를 통하여 다른 체계와 자료를 교환 할수 있도록 한 국제 표준화 활동이며, 제정되고 있는 국제표준규격의 이름이다. 또한 SEDRIS는 다양한 환경요소를 표현할 수 있으며 데이터 변환이 빠르고 손실이 적기 때문에 국방 M&S의 지형 data구축 시 발생하는 각 군의 다양한 요구사항을 유연하게 수용할 수 있는 장점이 있다.

  • PDF

Implementation of a Network Provisioning System with User-driven and Trusty Protection Management

  • Lim, H.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권11호
    • /
    • pp.4720-4738
    • /
    • 2015
  • Proper management on user-driven virtual circuits (VCs) is essential for seamless operation of virtual networks. The Network Provisioning System (NPS) is useful software for creating user-driven VCs automatically and must take fault management into account for physical layer impairments on user-driven VCs. This paper addresses a user-driven and trusty protection management in an NPS with an open standard Network Service Interface (NSI), as a contribution to show how to implement the user-driven and trusty protection management required for user-driven VCs. In particular, it provides a RESTful web service Interface for Configuration and Event management (RICE) that enable management of a distinguished data and control plane VC status between Network Service Agents (NSAs) in the event of a node or link fault and repair in a domain. This capability represents a contribution to show how network and protection events in a domain can be monitored between NSAs (NPSs with the NSI) in multiple domains. The implemented NPS controls and manages both the primary and backup VC with disjoint path in a user-driven manner. A demonstration to verify RICE API's capability is addressed for the trusty protection in the dynamic VC network.

편집 설계 방법을 이용한 고체 추진제 형상 설계 자동화 프로그램 개발 (Development of a Solid Fuel Design Automation Program Using Configuration Design Method)

  • 김보현;이강수;양준서;이도형;오석진;권혁선;김성환
    • 한국CDE학회논문집
    • /
    • 제13권5호
    • /
    • pp.372-381
    • /
    • 2008
  • We developed a design automation system to reduce the lead time and help engineers in designing a solid fuel, or a grain, for rocket missiles. First, we analyzed design activities and shapes of a grain, which resulted in the standard of design process and shape. We decided development process which consisted of two typical activities such as constructing master library and implementing design system. We constructed some master models for typical external shapes and core shapes of grains which were used in modeling the shape of a designing grain. Also we implemented a design automation program to use the master models according to the pre-defined design process. It can calculate some design parameters such as mass, mass center, volume and combustion area that are used in analyzing a proposed grain. Finally, we could reduce the design time dramatically and increase design quality by automating many routine and difficult works.

반도체 제조 공정에서 장비와 호스트간 SECS 프로토콜 개발 (Development of the SECS Protocol between Equipments and a Host in a Semiconductor Process)

  • 김대원;전종만;이병훈;김홍석;이호길
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 D
    • /
    • pp.2904-2906
    • /
    • 2000
  • 본 논문에서는 반도체 제조 공정에서 장비와 호스트간에 통신을 할 수 있는 SECS(SEMI Equipment Communications Standard) 프로토를의 개발을 제안한다. SECS 프로토콜은 메시지 전송을 위한 헤더 부분을 정의하는 SECS-I 프로토콜과 메시지 내용을 정의하는 SECS-II 프로토콜로 나뉘어지는데, RS232 시리얼 통신을 하는 SECS-I 프로토콜 대신에 이더넷(ethernet)을 통해 TCP/IP 통신을 할 수 있는 HSMS 프로토콜을 구현하고자 한다. HSMS(High-speed SECS Message Services)프로토콜은 SECS-I과 마찬가지로 SECS-II 메시지 내용을 전송 할 수 있도록 10바이트 크기의 헤더로 정의된다. HSMS 프로토콜 통신은 TCP/IP를 기반으로 하기 때문에 SECS 메시지 전송을 위한 통신 선로를 설정하기 위해 소켓 API를 응용하고 항상 통신 대기상태를 유지하기 위해 데몬(daemon) 형태로 구성한다. 실제 메시지 내용을 정의하고 있는 SECS-II 프로토콜은 데이터 인덱스 테이블과 표준에 정의된 형식에 맞게 파일형태나 DLL(Dynamic Link Library)형태로 구성하고 프로세스 프로그램(process program)을 수행하기 위해 SECS 프로토콜 표준에서 정의하는 SML(SECS Message Language)형식으로 변환 할 수 있는 스크립트 변환기(script translator)를 구현한다. 또한 HSMS 프로토콜이 전송할 SECS-II 메시지를 저장하기 위한 파라미터를 정의하고 실제 통신을 위한 테스트 베드를 위한 응용 프로그램을 제작한다

  • PDF

XBRL을 활용한 기업정보공급사슬의 웹서비스 구현방안에 대한 연구 (A Framework for Enterprise Information Supply Chain Using XBRL Web Services)

  • 정철용
    • 한국정보시스템학회지:정보시스템연구
    • /
    • 제15권4호
    • /
    • pp.247-268
    • /
    • 2006
  • We introduce about XBRL, eXtensible Business Reporting Language, which is widely accepted as the international standard language for business financial reporting. XBRL is a language for the electronic communication of business and financial data which is revolutionizing business reporting around the world. It provides major benefits in the preparation, analysis and communication of business information. It offers cost savings, greater efficiency and improved accuracy and reliability to all those involved in supplying or using financial data. XBRL is a kind of XML application based on the open Internet technologies. We propose a framework for enterprise information supply chain using XBRL Web services. A Web service is defined as a software system based on XML and designed to support interoperable machine-to-machine interaction over a network by the W3C. Web services are frequently just application programming interfaces (API) that can be accessed over a network, such as the internet and executed on a remote system hosting the requested services. An XBRL Web service-based enterprise information supply chain enables for companies to implement seamless information supply chains from businesses to financial institutions, to supervisory authorities, and to other stake holders for real time information access. And thereby it is expected to contribute to the increase in the value of companies due to the enhanced visibility and transparency of accounting and management.

  • PDF

모바일 그래픽 응용을 위한 파이프라인 구조 특수 목적 연산회로의 하드웨어 설계 (Hardware Design of Pipelined Special Function Arithmetic Unit for Mobile Graphics Application)

  • 최병윤
    • 한국정보통신학회논문지
    • /
    • 제17권8호
    • /
    • pp.1891-1898
    • /
    • 2013
  • 3차원 그래픽 API인 OpenGL과 Direct3D를 효율적으로 처리하기 위해 sine, cosine, 역수, 역제곱근, 지수 및 로그 연산을 처리하는 부동소수점 연산회로를 설계하였다. 고속 연산과 2 ulp 보다 작은 오차를 만족시키기 위해 2차 최대최소 근사 방식과 테이블 룩업 방식을 사용하였다. 설계된 회로는 65nm CMOS 표준 셀 조건에서 2.3-ns의 최대 지연시간을 갖고 있으며, 약 23,300 게이트로 구성된다. 최대 400 MFLOPS의 연산 성능과 높은 정밀도로, 설계한 연산회로는 3차원 모바일 그래픽 분야에 효율적으로 적용 가능하다.

VoIP 표준 프로토콜을 위한 MGCP 및 SDP 스택 개발에 관한 연구 (A Study on the Development of MGCP and SDP Stack for VoIP Standard Protocols)

  • 고광만
    • 한국정보처리학회논문지
    • /
    • 제7권11S호
    • /
    • pp.3668-3674
    • /
    • 2000
  • 최근 VoIP(Voice over IP) 관련 기술이 국내외 IP 네트워크 시장에서 급부상하고 있다. 국내에서 MGCP, MEGACO, SIP, SDP 등 게이트웨이 제어 관련 프로토콜 스택의 개발을 위한 연구는 아직까지 보고된 바가 없으며 아직은 열악한 환경과 많은 시간 및 기술을 요하는 관계로 인해 이를 진행하기 위한 시도만 일부 이루어지고 있다. 따라서 본 연구에서는 IETF에서 제공되는 MGCP, SDP 프로토콜 문법을 기반으로 각 프로토콜 메시지를 위해 파서, 구문 분석기, 엔코더/디코더, 엔코더/디코더를 위한 헤더 파일 생성기로 구성된 프로토콜 스택을 개발하였다. 이를 위해 각 프로토콜 문법에 대해 문법-지시적(Syntax-directed) 변환 방법을 적용하여 엔코딩/디코딩을 위한 API, 구문 분석기, 헤더 파일 생성기를 구현한다.

  • PDF

모바일 그래픽스 응용을 위한 부동소수점 승산기의 설계 (Design of Floating-Point Multiplier for Mobile Graphics Application)

  • 최병윤
    • 한국정보통신학회논문지
    • /
    • 제12권3호
    • /
    • pp.547-554
    • /
    • 2008
  • 본 논문에서는 2단 파이프라인 구조의 부동 소수점 승산기 회로를 설계하였다. 부동 소수점 승산기는 3차원 그래픽 API인 OpenGL과 Direct3D를 위한 단일 정밀도 곱셈 연산을 지원하며, 포화 연산, 면적 효율적인 점착(sticky) 비트 발생기 및 플래그 프리픽스 가산기를 결합하여, 면적 효율적이며 적은 파이프라인 지연 구조를 갖는다. 설계된 회로는 $0.13{\mu}m$ CMOS 표준 셀을 사용하여 합성 한 결과 약 4-ns의 지연시 간을 갖고 있으며, 약 7,500개로 구성된다. 설계된 부동 소수점 승산기의 최대 연산 성능은 약 250 MFLOPS이므로, 3차원 모바일 그래픽 분야에 효율적으로 적용 가능하다.