• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.435-440
• /
• 2011

Maxillary canine impaction is a common eruption problem in children. Impaction frequently involves further complications such as root resorption of adjacent teeth, cyst formation and migration of the neighboring teeth, etc. Various treatment modalities include extraction of preceding deciduous canine, orthodontic traction, and surgical extraction followed by immediate replantation of the extracted tooth at the proper position(autotransplantation). Autotransplantation is considered as the treatment of choice when surgical exposure and subsequent orthodontic traction are difficult or impossible due to unfavorable impacted position. The prognosis of autotransplantation is affected by the degree of apex formation, surgical procedures performed, timing of root canal treatment, and length of stabilization period. In these two cases presented, the patients with unerupted maxillary canine were treated with autotransplantation. One case was thought that guidance of eruption by orthodontic traction was difficult because of its unfavorable impacted position. In the other case, parents didn't agree to treat by orthodontic traction, therefore autotransplantation was done. In both cases, autotransplantation was carried out following root canal treatment and orthodontic treatment, and both cases have demonstrated to be successful to this day.

• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.63-70
• /
• 2017

Materials and methods: Sixty extracted premolars were assigned to three groups according to the root canal system (Weine's classification; type I, II and III) of 20 teeth each using radiographic examination. The root tip was cut horizontally 1 mm from the anatomical apex and the apical cross-section was visualized using microscope at x50 magnification and photographed. Minimum and maximum apical root canal diameter of each tooth was measured and classified into three types by canal morphology (round, oval and flattened shape). Statistical analysis was performed to compare the apical root canal diameter and morphology according to the root canal system. Results: In apical root canal morphology at cross-sectional view, the most common shape was round in type I, flat in type II, and oval in type III. In apical root canal diameters at cross-sectional view, there was a significant difference between the minimum and maximum diameter in all types (p<0.05). The maximum diameter was 0.331 mm in type I, 0.519 mm in type II, and 0.310 mm in type III. There was a significant difference among type I, III and type II (p<0.05). Conclusion: The morphology and diameter of apical root canal was different according to the root canal system. Therefore, clinicians should consider the apical file size in view of the apical root canal shape according to the root canal system.

• The Korean Journal of Malacology
• /
• v.5 no.1
• /
• pp.1-9
• /
• 1989

A scanning electron microscopic study on the glochidium and glchidial encystment of Anodonta grandis on the guppy was conducted. The shape of the glochidium is apparently triangular and its averge size is 0.45mm X0.4mm when closed, The two glochidial shell valves are of the same size, kept together by a ligament of 120${\mu}{\textrm}{m}$ in length and 7 ${\mu}{\textrm}{m}$ in width. Each of the glochidial shell valves has a 16 ${\mu}{\textrm}{m}$ long hook sitdded with many spines on the superior face. A large area to the apex of the valve surrounding the base of the hook is provided with numerous small spines which become progressively smaller towards the periphery of the area, The external surface of the glochidial shell valve is covered with numerous small processes showing successive change in the shape and the pattern of destribution by part. Besides the processes, there are a number of niches scattered all over the exterior surface. The glochidial shell valve has two layers. One is the outer thin membrane bearing the processes and the niches and the others is the inner layer bearing numerous holes which any accessory structure and 2.65 ${\mu}{\textrm}{m}$ in diameter, emerges from a canal located at center of ventral plate of the mamtle, A total of three types of the hair cells are observed. In present artificial infection of the glochidium to the guppy, it took about three to four hours to complete an early cysts, During the period of encystment, The epithelial cells of the host fish actively migrated toward the attached glochidium and covered it.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.55-65
• /
• 2011

Some characteristics of germ cell differntiations during spermiogenesis and mature sperm ultrastructure in male Phacosoma japonicus were investigated by transmission electron microscope observations. The morphology of the spermatozoon of this species has a primitive type and is similar to those of other species in the subclass Heterodonta. Morphologies of the sperm nucleus and the acrosome of this species are the cylindrical type and cap shape, respectively. The spermatozoon is approximately 45-50 ${\mu}m$ in length, including a long curved sperm nucleus (about $3.70{\mu}m$ long with 45 $^{\circ}$ of the angle of the nucleus, an acrosome (about $0.55{\mu}m$ in length), and tail flagellum (about 42-$47{\mu}m$)The axoneme of the sperm tail shows a 9+2 structure. As some characteristics of the acrosomal vesicle structures, the basal and lateral parts of basal rings show electron opaque part (region), while the anterior apex part of the acrosomal vesicle shows electron lucent part (region). These characteristics of the acrosomal vesicle were found in the family Veneridae and other several families in the subclass Heterodonta. These common characteristics of the acrosomal vesicle in the subclass Heterodonta can be used for phylogenetic and systematic analysis as a taxonomic key or a significant tool. The number of mitochondria in the sperm midpiece of this species are four, as one of common characteristics appear in most species in the family Veneridae and other families in the subclass Heterodonta. However, exceptionally, only three species in Veneridae of the subclass Heterodonta contain 5 mitochondria. The number of mitochondria in the sperm midpiece can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or tools.

• The Korean Journal of Malacology
• /
• v.28 no.2
• /
• pp.165-174
• /
• 2012

The morphology and taxonomic values of the sperm in male Chlamys (Swiftopecten) swiftii were investigated by transmission electron microscope observations. The morphologies and ultrastructures of the sperm nucleus and the acrosome of this species are the vase type and long cone shape, respectively. Spermatozoa are approximately $45-50{\mu}m$ long including a sperm nucleus (approximately $2.60{\mu}m$ long), an acrosome (about $0.63{\mu}m$ long), and a tail flagellum (approximately $44-47{\mu}m$ in long). The axoneme of the sperm tail shows a 9+2 structure. In this study, the right and left basal rings in the acrosomal vesicle of this species show electron opaque part (region), and also the anterior apex part of the acrosomal vesicle shows electron opaque part (region). These characteristics of the acrosomal vesicle were found in Pectinidae and other several families in subclass Pteriomorphia. The number of mitochondria in the midpiece of the sperm of this species are four, as one of common characteristics appear in most species in Pectinidae in subclass Pteriomorphia. In addition, the satellite fibres are found near the distal centriole of this species, as have been reported in other species of Pectinidae in subclass Pteriomorphia. Accordingly, structutral characteristics which are found in the acrosomal vesicle, four mitochondria in the sperm midpiece and the appearance of the satellite fibers near the distal centriole of C. (S.) swiftii in Pectinidae (subclass Pteriomorphia), can be employed for phylogenetic and taxonomic analyses as taxonomic key or a significant tool.

• Steel and Composite Structures
• /
• v.19 no.5
• /
• pp.1167-1184
• /
• 2015

Despite considerable life casualty and financial loss resulting from past earthquakes, many existing steel buildings are still seismically vulnerable as they have no lateral resistance or at least need some sort of retrofitting. Passive control methods with decreasing seismic demand and increasing ductility reduce rate of vulnerability of structures against earthquakes. One of the most effective and practical passive control methods is to use a shear panel system working as a ductile fuse in the structure. The shear Panel System, SPS, is located vertically between apex of two chevron braces and the flange of the floor beam. Seismic energy is highly dissipated through shear yielding of shear panel web while other elements of the structure remain almost elastic. In this paper, lateral behavior and related benefits of this system with narrow-flange link beams is experimentally investigated in chevron braced simple steel frames. For this purpose, five specimens with IPE (narrow-flange I section) shear panels were examined. All of the specimens showed high ductility and dissipated almost all input energy imposed to the structure. For example, maximum SPS shear distortion of 0.128-0.156 rad, overall ductility of 5.3-7.2, response modification factor of 7.1-11.2, and finally maximum equivalent viscous damping ratio of 35.5-40.2% in the last loading cycle corresponding to an average damping ratio of 26.7-30.6% were obtained. It was also shown that the beam, columns and braces remained elastic as expected. Considering this fact, by just changing the probably damaged shear panel pieces after earthquake, the structure can still be continuously used as another benefit of this proposed retrofitting system without the need to change the floor beam.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.511-515
• /
• 2013

Hypocotyls explants of melon seedling were cultured on Murashige and Skoog's (MS) medium supplemented with 1 mg/L 2,4-dichlorophenoxy acetic acid (2,4-D) and 0.5 mg/L benzyl aminopurine (BA) for 6 weeks to produce somatic embryos. In somatic embryos produced through intervening bright yellow friable (BYF) from the explants, somatic embryos with two-cotyledon (26%) and horn-type cotyledon (74%) were observed. The procambial strand of cotyledons was originated from circular procambial tissues of lower hypocotyls. The circular procambial independently divided into two procambial strand at the edge of cotyledonary-node, and then connected to each cotyledon to form somatic embryos with two-cotyledon. When cotyledon was horn-type, the circular procambial strand in lower hypocotyls would continuously remain connected to the cotyledon. However, somatic embryos with two or horn type cotyledon formed an abnormal shoot apex without the tunica-corpus structure or dome shape in the inter-cotyledonary area. These results demonstrated that the variation of cotyledon in somatic embryos was closely related to procambial tissue differentiation and shoot apical formation.

• Journal of Plant Biology
• /
• v.38 no.1
• /
• pp.115-119
• /
• 1995

In order to clarify the relationship between the activity and age of vacular cambium in the rhizome of Botrychium ternatum, the cambia of the 6th and 10th internodes from its shoot apex were compared ultrastructurally and histochemically. The cambium in the 6th internode had two to four radially arranged cells in each row, and the cells are radially flattened and had thiner tangential walls than radial. The cambial cells were ultrastructurally characterlized by the presence of a large vacuole, few storage materials such as starch grains and lipid droplets, and various cell organelles such as mitochondria, endoplasmic reticulums and dictyosomes in cytoplasm. On the other hand, the cells of cambium in the 10th internode showed irregular arangement and somewhat enlargement in radial plane. The cells were filled with numerous storage materials and small vacuoles and had few cell organelles except for mitochondria. In addition, the activity of acid phosphatase appeared in the cambium of the 6th internode but of the 10th. From the above results, it is clear that the vascular cambium of the 6th internode was active and that of the 10th was dormant. Thus we reached a conclusion that the rhizome of '||'&'||'trychium ternatum has determinate cambium.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.1
• /
• pp.36-41
• /
• 2010

Objective: The aim of this study was to investigate the morphological characteristics of the thalamoperforating arteries that arise from the P1 segment of the posterior cerebral artery. Methods: Thalamoperforating arteries located in the interpeduncular fossa were dissected in 26 formalin-fixed human cadaver brains. We investigated the origin site of thalamoperforating arteries from the P1 segment, number and diameter. and variations in their origin. Results: Thalamoperforating arteries arose from the superior, posterior or posterosuperior surfaces of the P1 segment at the mean 1.93 mm (range, 0.41-4.71 mm) distance from the basilar apex and entered the brain through the posterior perforated substance. The average number was 3.6 (range 1-8) and mean diameter was 0.70 mm (range 0.24-1.18 mm). Thalamoperforating arteries could be classified into five different types according to their origin at the P1 segment: Type I (bilateral multiple), 38.5%; Type II (unilateral single, unilateral multiple), 26.9%; Type III (bilateral single), 19.2%; Type IV (unilateral single), 11.5%; Type V (unilateral multiple), 3.8%. In 15.4% of all specimens. thalamoperforating arteries arose from the only one side of P1 segment and were not noted in the other side. In such cases, the branches arising from the one side of P1 segment supplied the opposite side. Conclusion: Variations in the origin of the thalamoperforating arteries should be keep in mind to perform the surgical clipping, endovascular treatment or operation involving the interpeduncular fossa. In particular, unilateral single branch seems to be very risky and significant for surgical technique or endovascular treatment.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.379-386
• /
• 2001

This study was performed to evaluate the sealing ability of various retrograde filling materials by using bacterial penetration and dye penetration test. One hundred and forty extracted human teeth with single, straight canals and mature apiece were collected and used for this study. All canals were instrumented using an engine driven Ni-Ti file (ProFile). After removing 3mm from the apex of tooth, a standardized 3mm root end cavity was prepared using an ultrasonic instrument. The 70 teeth were randomly divided into 7 groups : 6 groups for retrograde filling using Super-EBA, ZOE, Chelon-Silver, IRM, ZPC and amalgam. The 7th group was used as a negative control. Nail varnish was applied to all external root surfaces to the level of the reseated root ends to prevent lateral microleakages. The specimens were then sterilized in an ethylene oxide sterilizer for 24 hours. 2 mm of the reseated root was immersed in a culture chamber containing a Tripticase Soy Broth with a phenol red indicator. The coronal access of each specimen was inoculated every 72 hours with suspension of Proteus vulgaris. The culture media were observed every 24hours for color change indicating bacterial contamination. The specimens were observed for 4weeks. The remaining 70 teeth were submitted to a dye penetration test. The canals of all teeth were first sealed with AH26 and obturated using an Obtura II system. Root resection, root end preparation and retrograde filling was performed as above. All specimens were suspended in 2% methylene blue dye for 72 hours before being ion gitudinally split. The degree of dye penetration was then measured using a stereomicroscope at 10 magnification and evaluated. The results were as floows : 1. In the bacterial penetration, the degree of leakage was the lowest in the Super-EBA, followed by, in ascending order, ZOE, Chelon-Silver IRM and ZPC. The amalgam showed highest bacterial leakage of all(p<0.01). 2. In the dye penetration, the degree of microleakage was the lowest in the Chelon-Silver and Super-EBA, followed by, in ascending order, IRM, ZPC. The ZOE and amalgam showed the highest microleakage of all (p<0.05). These results suggested that the eugenol based cement, Super-EBA, have excellent sealing ability as a retrograde filling material.